|
| 1 | Taking down cement plaster includingdismantling floor, floor or wall tilingon brick wall of any description including raking out joints, hacking for key, scrubbing down with water etc. |
| 2 | ( M & L ) Rendering 10 mm thick on fair faces of brick work or concrete surface with cement plaster 1 : 4, finishing even and smooth without using extra cement, all as directed byEIC/SIC |
| 3 | M/L Brushing neat cement slurry with 3.0kg of cement per sq. Metre |
| 4 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. |
| 5 | Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match |
| 6 | Demolition concrete infloors and pavings n exc 10 cm thickness |
| 7 | M&L for Providing, cement concrete (1:2:4) Type B1 using 20 mm graded stone aggregate and finished even and smooth as directed by EIC/SIC. |
| 8 | M&L for Screed bed or bedding layer of mortar 15 mm thick in CM (1:4) for laying floor tiles complete. |
| 9 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 10 | M&L Granite (of any type) 20mm thick , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 11 | Taking down shaters with frame any types (MS/PVC/Wooden). |
| 12 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, complete in all aspects/hardware/ accessories. |
| 13 | S/F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete in all aspects/hardware/ accessories |
| 14 | S/F Extruded Aluminium anodised handles, cost type 100 mmand fixed |
| 15 | S/F Aluminium anodised, barrel tower bolts 125 mm of extruded section and fixed |
| 16 | Aluminium alloy, anodised, sliding door bolt /Latch 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 17 | Butt hinges 75 mm , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed |
| 18 | S/F Door Panal of block boards, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber with decorative face veneer on both facescomplete in all aspects/hardware/accessories |
| 19 | S&F Second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete. |
| 20 | S/F Extruded Aluminium anodised handles, cost type 100 mmand fixed |
| 21 | S/F Aluminium anodised, barrel tower bolts/Latch 200 mm of extruded section and fixed |
| 22 | S&F for Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 23 | S&F for Butt hinges 100 mm , extruded aluminium alloy with galvanised mild steel hinges pin, anodised. |
| 24 | M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing , dovetailed or welded. |
| 25 | M&L for preparing the concrete or plastered wall surfaces and applying one coat ofprimer paints complete all as directed by EIC/SIC. |
| 26 | M&L for applying two coats ofExterior Plastic emulsion paints Ist qualityup to height of 15 meter above including all types oftools and plants, scaffoldings/stagging/ladders etc complete all as dirtectedby EIC/SIC. |
| 27 | M&L for complete removal of existing surfaces of walls complete. |
| 28 | M&L for preparing the wall surfaces and applying two coats ofOil Emulsion Distemper (Make/Brand quality - first quality) complete all as dirtectedby EIC/SIC. |
| 29 | M&L for preparing the wooden surfaces of anydescriptionand applying two coats of Synthetic enamel paints over a coat ofwooden primer complete all as directed by EIC/SIC. |
| 30 | M&L for preparing the wooden/steel surfaces of any typesand description and applying two coats of synthetic enamel paintovera coat ofprimer complete. |
| 31 | M&L for Grouting 25 mm thick under stanchion bases or grillages at any places and applying Cement mortar (1:2) to achieve even and smooth surfaces of any positions etc. including any temporary shuttering to edgescomplete all as directed. |
| 32 | S&F for Stainless steel kitchen sink1.00 mm thick with plug, waste pipe,waste couplings, washers, including cantilever cast iron brackets, connecting unions overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mmor fixed on existing kitchen cooking platform including removal ofold sink of any sizes complete. |
| 33 | Dismentaling of existing water storage Tanks ofany capacity and description complele. |
| 34 | S&F Rotational moulded polye thylene water storage tanks 3 layers (cylindrical vertical with closed top) 500 Ltr capacity hoisted and fixed in position complete. |
| 35 | S&F for 75 mm Cast iron or PVC floor/Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete. |
| 36 | S&F for PVC (SWR) gully trap 125/110 mm |
| 37 | M&L forPCC (1:3:6) type C2 as Concrete bed including forming craddles or haunching the pipes complete. |
| 38 | M&L for Liquid water proofing compound. |
| 39 | M&L for 20 mm thick Cement Mortar (1:2) as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete. |
| 40 | M&L for applying Polythene film, 150 micron thick, laid ona coat of bitumen primer, @ 0.30 to 0.50 kg per sq. masDPC layer complete. |
| 41 | M&L for Ball brass Float valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. |
| 42 | M&L for Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC(1:2:4) Type B-1 as required. |
| 43 | Excavating in trenches in mud foul conditions exc 1.5 m wide and n exc 1.5 m in depthand getting out and disposes off the same as directed. |
| 44 | M&L for Surface dressingin soils. |
| 45 | Site Clearance |
| 46 | M&L for50 mm thickPrecast RCC (1:2:4) type B-1 (20mm graded stone aggregate) slab covers/flooring, bedded, and jointed in cement mortar 1:6 and pointed in cement mortar( 1:3). |
| 47 | M&L PCC (1:2:4) Type B2Nominal sizeof 40 mmgraded coarse aggregate in Portland cement concrete. |
| 48 | M&L for Broken bricks hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces . |
| 49 | M&L for Removing building materials to a distance of100m orabove upto 1 KM total distance, beyond the lead including loading, unloading and stacking at the destination from any height up to 15 M. |
| 50 | Taking up or down steel 15 mm bore of pipes tubing and connections, including cleaning for re fixing or remove to stores. |
| 51 | Taking up or down steel25-32 mm bore of pipes tubing and connections, including cleaning for re fixing or remove to stores. |
| 52 | S&Ffor 15/16 mm bore 3-layer PP-RPolypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. |
| 53 | S/F for 40mm bore 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc |
| 54 | S&F for Grating doom 100 mm ptmt |
| 55 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintelsand cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth . |
| 56 | Supply vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mmor 680 x 470 mm white, with integral foot rests (excluding flushing cistern and flush pipe). |
| 57 | M&L for Fixing ofvitreous china squatting pan water closet \"Orissa\" pattern includingincluding provision of lime or cement concrete bedding. |
| 58 | M&L for taking out old damaged water closet in repairs of any size and pattern. |
| 59 | S&F for110 mm bore PVC(SWR)Trap P/Q/\"S |
| 60 | Supply only forPVC valveless, syphonic PVC valveless, syphonic action type, Flushing Cistern 10 Ltr, low level, white, with inlet, ball valve, float and handle including brackets. |
| 61 | M&L for Fixing only Flushing cistern 10 LTR capacity. |
| 62 | Supply Vitreous Cliina wash basin, angle back, size 600x480mm white, plug and porcelain stopper but including bracket. |
| 63 | M&L for Fixing onlyVitreous Cliina wash basin, angle back, size 600x480mm white, plug and porcelain stopper but including bracket. |
| 64 | S&F for 40 mm bore dia Bottle trap of PTMT having minimum water seal of25mm .(Minimum weight 32mm-260gms/40mm-270 gms). |
| 65 | S&F for Waste coupling of PTMT (half or full threaded) .(Minimum weight 40mm 45gms/40mm-60 g). |
| 66 | S&F for15 mm bore dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms.) |
| 67 | S&F for Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms). |
| 68 | S&F in repairs Looking Mirror of size (600mm x 450mm) bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 69 | S&F for Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms). |
| 70 | S&F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms). |
| 71 | S&F for Vitreous China soap tray embedded in the wall. |
| 72 | S&F for Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms). |
| 73 | S&F for 15 mm bore dia Bib tap long body ofPTMT any colour highpressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms). |
| 74 | S&F for PVC connections 15mm size with PTMTnuts of length 600 mm. |
| 75 | S&F for Health faucetmild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete. |
| 76 | S&F for 15 mm bore dia Two way bib cock Cast iron chromium plated. |
| 77 | S&F forsize of mesh 12 mm Mosquito proofwire netting of galvanised steel wire 0.71mm dia fixed with tinned tacks ofwire staples. |
| 78 | S&F forPP-R Gate valves 20 to 25 mm (brass insert) as per requirement of the site. |
| 79 | S&F Low density polyethylene (LDPE) pipes 40 or 50 mmof pressure rating 6 kgf/sq. cm fixed and jointed complete. |
| 80 | S&F for 110 mm borePVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls or laid in floors including proper packing or haunching complete all as directed by EIC/SIC. |
| 81 | S&F for 110 PVC (SWR) bends any radius. |
| 82 | S&F for110 mm bore PVC (SWR) junction single (Single T) or branch piece single (Single Y)equal or unequal ofany radius. |
| 83 | S&F for 110 mm bore PVC (SWR) couplers/Vent Cowlany radius. |
| 84 | M&L for Brick work with sub class \"B\" bricks laid strainght or curved on plan exc 6 m mean radius built in CM (1:4). |
| 85 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The proposed make for the item will be Sika/BASF/FOSROC/ Dr.Fixit/ Abro/Berger /Asianpaints/Nerolacetc .The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of EIC/SIC. |
| 86 | Supply only water proofing compound. |
| 87 | M&L for Bitumasticgola with 80/25 bitumen and coarse sand mixture (1:3) by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as directed by EIC/SIC. |
| 88 | M&L for Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 89 | Credit ofold Flushing Cistern. |
| 90 | Credit of old Basin Hand Basinof any pattern and size. |
| 91 | Credit ofold steel water tube 15/20/25 mm bore dia |
| 92 | Credit of old sink of any pattern and size. |
| 93 | Credit of old water tank of any capacity. |
| 94 | Credit ofold damaged MS window with frame etc |
| 95 | Credit of old wooden doors with frames etc |
| 96 | Credit of old Bib tap/stop cock/Pillar tap or Angle cock of any bore size or type. |
| 97 | M&L for one light point or one fan point controlled by one switch with cable 1.5 sq mm size wiring with copper conductor cable enamelled steel conduit. |
| 98 | M&L one 3 pin socket outlet 15 Amp independent with cables 4 sq mm size wiring with copper conductor cable. |
| 99 | S&F wiring for circuit/submain wirihg alongwith earth wire 2x1.5 sq mm + 1.1 sqmm earth wire of FR is PVC insulated copper conductor, single core cable in surface/Recess as required in PVC conduit concealled wiring. |
| 100 | S&F wiring for circuit/submain wiring alongwith earch size ofFR is PVCinsulated copper conductor, single core cable in surface/ Recess as required 2x6.0 sqmm +1x4.0 sqmm earth inPVC conduit concealled wiring. |
| 101 | PVC rectangular block for mounting, switches sockets fan regulators etc with 3 mm thick plastic laminated sheet cover of size 175x100x50 mm deep. |
| 102 | PVC rectangular block for mounting, switches sockets fan regulators etc with 3 mm thick plastic laminated sheet cover of size 250x200x50 mm deep. |
| 103 | PVC rectangular block for mounting, switches sockets fan regulators etc with 3 mm thick plastic laminated sheet cover of size 100x000x50 mm deep. |
| 104 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps. (Make : Legrand, Standard, Havells) |
| 105 | S&F Ceiling Rose 3 point/PVC polycarbonate isolated body. ( Make : ANCHOR/SSK/HAVELLS) |
| 106 | M&L Lamp Holder PVC/Poly carbonate type with back plate suitable for batten fittings. |
| 107 | M&L Bell Push Flush Type, 5 Amp |
| 108 | S&F Switch piano flush type single pole one way 15 Amps. (Make : ANCHOR/SSK/HAVELLS ) forPower. |
| 109 | S&F Socket outlet ( 2 in 1),3 pin, 5 and 15 amp Flush type.(Make : Anchor/SSK/Havells) for Power. |
| 110 | S&F Switch piano flush type single pole one way 5 Amps. (Make : ANCHOR/SSK/HAVELLS ) forPower & Aircirculator Fan |
| 111 | S&F Socket outlet 3 pin, 5 amp flush type.Make : Anchor/SSK/Havells for Power. |
| 112 | S&F wiring for circuit/submain wiring alongwith earth wire size ofFR is PVCinsulated copper conductor, single core cable in surface/Recess as required 2x4.0 sq +1x2.5.0 sqmm earth inPVC conduit concealled wiring. |
| 113 | Cutting chases for PVC conduit wiring/cable and sinking\"s for boxes and making good to walls/floors etc in case of recessed or concealled conduite wiring of light & power circuit. |
| 114 | M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 3.5 core 35 sqmm. |
| 115 | MCCB 415 Volt 16 KA 4 Pole 125 Amp |
| 116 | S&F sheet metal enclosure for DB\"s when MCB to be used, triple pole & neutral, 4 way, double door type as per diagram (MCB DB No 1,2,3,4).Make : Legrands, Siemens, Havells, Standard, L&T etc |
| 117 | S&F Isolator 4 pole 240 volt 63 amp. Make :Legrands, Siemens, Havells, Standard, L&T etc |
| 118 | S&F amp rating 240 V 10 KA C curve miniature circuite breaker capacity in the MCB DB complete with connection testing andcommissioning SP 5 to 32 Amp. Make :Legrands, Siemens, Havells, Standard, L&T etc |
| 119 | S&F Isolator DP 240 volt 63 amp.Make :Legrands, Siemens, Havells, Standard, L&T etc |
| 120 | S&F sheet metal enclosure for DB\"s when MCB to be used, single pole & neutral, 8 way with 200 amp rated bus bar, 240 volts double door type with separate neutral link with fixing arrangement. Make : Legrands, Siemens, Havells, Standard, L&T etc |
| 121 | S&F sheet metal enclosure for DB\"s when MCCB to be used, triple pole & neutral, 4 way with 415 volts double door type with separate neutral link with fixing arrangement.Make : Legrands, Siemens, Havells, Standard, L&T etc |
| 122 | Earth continuity conductor or main wire 4 sqmm earthing lead fixed to walls on batten earthing lead fixed to wall on batten ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dis galvanised iron or steel wire. |
| 123 | Demolition of PCC in ground floors and pavings n exceedingt 15 cm thickness (below or above ground leve). |
| 124 | Excavations in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundations or for shafts, wells, cesspits, pier holes n.exc 10 sqm on plan and n.exc 1.50m depth and getting out in hard/dense soils. |
| 125 | M&L for sand filling under floors or in foundations including watering and consolidations complete. |
| 126 | M&L for Brickwork withsub class ‘B’bricks laid dry straight or curved on plan exc 6 m mean radiu. |
| 127 | M&L forPCC (1:3:6) Type C2 using 40 mm graded stone aggregatein foundations, filling and mass concrete. |
| 128 | M&L for PCC (1:2:4) Type B2 using 40 mm graded stone aggregate as in surface channels and drains orin walls orretaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts etc (including caps and bases). |
| 129 | S&F for GI pipes heavy class 40 mm bore dia |
| 130 | S&F for GI pipes heavy class 100 mm bore dia |
| 131 | M&L for Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC(1:2:4) Type B-1 as required but in brick walls built in cement mortar. |
| 132 | Credit of Old 5 Amp switch and socket any type. |
| 133 | Credit of Old 15 Amp switch and socket any type. |
| 134 | Credit of Old switch board any type. |
| 135 | Credit of Old Ceiling Rose |
| 136 | Credit of PVC conduits/casing any type. |
| 137 | Credit of Old Flexible wire 0.5 sqmm to 2.50 sqmm |
| 138 | Credit of Old MCB up to 16 Amp |
