|
| 1 | Providing and supply of material for day to day maintenance work of Vikas Sadan as and whenever required as per site condition decided by Engineer in Charge.A) Ordinary portland Cement 43 grade |
| 2 | Providing and supply of material for day to day maintenance work of Vikas Sadan as and whenever required as per site condition decided by Engineer in ChargeA) Coarse sand (zone III) |
| 3 | Providing and supply of material for day to day maintenance work of Vikas Sadan as and whenever required as per site condition decided by Engineer in Charge.A) Fine sand (zone IV) |
| 4 | Providing and supply of material for day to day maintenance work of Vikas Sadan as and whenever required as per site condition decided by Engineer in Charge. A) Common burnt clay F.P.S. (non modular) bricks class designation 7.5 |
| 5 | Providing ISI marked aluminium butt hinges(Powder coated) transparent to required colour or shade as per direction of engineer-in-charge :a)100x63x4 mm |
| 6 | Providing aluminium sliding door bolts, ISI marked (power coated) transparent to required colour or shade,as per direction of engineer-in-charge : a)250x16 mm (Powder coated) |
| 7 | Providing aluminium tower bolts, ISI marked, (power coated) to required colour or shade, as per direction of engineer-in-charge :a)250x10 mm (Powder coated) |
| 8 | Providing aluminium tower bolts, ISI marked, (Powder coated ) transparentto required colour or shade, as per direction of engineer-in-charge : a)150x10 mm |
| 9 | Providing aluminium handles, ISI marked, (Powder coated) transparent to required colour or shade, as per direction of engineer-in-charge : a)125 mm |
| 10 | Providing aluminium hanging floor door stopper, ISI marked, (Powder coated) transparent to required colour and shade, as per direction of engineer-in-charge :a)Twin rubber stopper |
| 11 | Providing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (a)125x64x1.90 mm |
| 12 | Providingpowder coated telescopic drawer channels 300 mm long complete as per directions of Engineer- in-charge. |
| 13 | Providing 3/4\"\" (20 mm) Cpvc fittings (HSN Code: 39172390).A) Elbow 90 degree- 200 nos.b) Tee- 200 nos. C) brass elbow - 200 nos.d) union- 200 nos.e)FTA brass - 200 nos. f) brass tea-200 nos. g) MTA brass-200 nos. h) end cap- 200 nos. i) socket- 200 nos. j) teflon tap 12.00 m lengh- 500 nos. k) m seal(100 gm)- 200 nos. |
| 14 | Providing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 15 | Providing 1x1/4\" (32 mm) Cpvc fittings. A) Elbo 90 degree-100 nos. B) Tee - 100 nos. c) brass elbo-100 nos.d) union- 100 nos.e) FTA brass- 100 nos. f) brass tea- 100 nos. g) MTA brass -100 nos.h) fittings clip - 100 nos.i) end cap- 100 nos. |
| 16 | \"Providing CPVC/UPVC tank Nipple (HSN Code: 39172390).a. Tank nipple, 20 mm -50 nos. b. Tank nipple, 25 mm -10 nos.c. Tank nipple, 32 mm -10 nos.d. Tank nipple, 40 mm -10 nos.\" |
| 17 | Providing Solvent Cement for CPVC/UPVC Pipes & Fittings Fast Setting Liquid Adhesive for Plumbing & Sewage Systems Adhesive of approved quality. A) 100 ml |
| 18 | Providing 32 mm C.P. brass waste of standard pattern, as per direction of engineer-in-charge:(a) Waste coupling 32 mm.\" |
| 19 | Providing SS nails/screw in all sizes as required at site, all complete as per direction of Engineer in charge. |
| 20 | Providing 1\"\" (25 mm) Cpvc fittings(HSN Code: 39172390).A) Elbow 90 degree- 100 nos.b) Tee- 100 nos. C) brass elbow - 100 nos.d) union- 100 nos.e)FTA brass - 100 nos. f) brass tea -100 nos. g) MTA brass -100 nos. h) end cap - 100 nos. i) socket- 100 nos. |
| 21 | Providing 1 1/2\"\" (40 mm) Cpvc fittings(HSN Code: 39172390).A) Elbow 90 degree- 50 nos.b) Tee- 50 nos. C) brass elbow - 50 nos.d) union- 50 nos.e)FTA brass - 50 nos. f) brass tea -50 nos. g) MTA brass -50 nos. h) end cap - 50 nos. i) socket- 50 nos. |
| 22 | Providingunplasticised PVC connection pipe with brass unions : (A) 90 cm length(a)15 mm nominal bore |
| 23 | Providing 4\"\" (110 mm) Upvc fittings confirming to IS code 13592 type B, having pressure 6 kg/cm2A) Tee- 100 nos. B) Nahani Trap - 100 nos.C)Elbow- 100 nos. D)Coupler-100 nos. |
| 24 | Providing 3\"\" (75 mm) Upvc fittings .confirming to IS code 13592 type B, having pressure 6 kg/cm2 A) Tee - 100nos.B) Elbow- 100 nos.C)Coupler- 100 nos. |
| 25 | Providing 2\"\" (50 mm) Cpvc fittings .A) Tee - 50nos.B) Elbow- 50 nos.C) Coupler- 50 nos. D) Union -50 nos.E) End cap-50nos. |
| 26 | Providing material for French Sprit Polish .Spirit - 20 litre Shellac-20 litre thinner -20 litre wood sealer -20 litre Sandpapers of assorted gratings -50 nos. wood filler putty -10 kg.Dhoti (worm out soft cotton cloth) -50 nos.tarpin oil-5 litre Polish Color-50 pkt.touchwood-20 litre |
| 27 | \"Providing CPVC Cistern Syphon of an approved quality conforming:(a)15 mm nominal bore |
| 28 | Providing CPVC Reducer Bush an approved quality as per direction and satisfaction of Engineer-in-charge:(25X20mm) - 20 nos.(32X25mm) - 20 nos. (32X20mm) - 20 nos. (40x32mm) - 20 nos.(40X25mm) - 20 nos.(40X20mm) - 20 nos.(50X40mm) - 20 nos.(50X32mm) - 20 nos.(50X25mm) - 20 nos.(50 X 20 mm) - 20 nos. |
| 29 | ProvidingCP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.A) 15 mm nominal bore |
| 30 | Providing CPVC Cistern ball cock of an approved quality: (a)15 mm nominal bore |
| 31 | Providing SS (304) floor grating (Cockroach) of an approved quality as per direction and satisfaction of Engineer-in-charge:(a) Circular/ Square shape of 125 X 125 mm |
| 32 | Providing CP Brass 32mm size Bottle Trap of approved quality & make all complete as per direction of Engineer in charge. |
| 33 | ProvidingPTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\" BSP thread and shapes, weighing not less than 60 gms. |
| 34 | ProvidingCpvc Ball Valve an approved quality as per direction and satisfaction of Engineer-in-charge:A) Cpvc Ball Valve 20mm- 50 nos.B)Cpvc Ball Valve 25mm - 50 nos.C) CpvcBall Valve 32mm - 50 nos.D) Cpvc Ball Valve 50mm- 50 nos.E) Cpvc Ball Valve 40 mm- 10 nos. |
| 35 | Providing PTMT grating of approved quality and colour. (A)Circular type(a)100 mm nominal dia |
| 36 | Providing PTMT grating of approved quality and colour. (A)Circular type (a)125 mm nominal dia with 25 mm waste hole |
| 37 | Providing SS (304 ) floor grating of an approved quality an approved quality as per direction and satisfaction of Engineer-in-charge: (a) Circular/Square shape of 125 mm (without hole/with hole) Note: 1. All above-mentioned items are required for day to day maintenance of higher offices, Toilets, office of Vikas Sadan, therefore quantities of items are to be supplied by the agency in part, whenever require by the department. If the agency fails to supply the material within 3 days, then a penalty will be imposed 2 times of the agreement item rate. 2. The Make of Material to be supplied by the agency as per attached approved list of material or as per direction of Engineer in Charge. The supplied material to be accepted by the department along with copy of original bill only.3. All the material supply by the agency have one-year warranty from the date of supply of material. The agency has to replace the material within 7 days if found defective.4. Water charges @1% will deduct from the running bill paid to the agency |
