|
| 1 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 2 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 36 kg to 80kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. Complete |
| 3 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. |
| 4 | 250 * 16mm |
| 5 | Providing and fixing aluminum tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 6 | 250 * 10 mm |
| 7 | Providing and fixing aluminium handing floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transpared or dyed to required colour and shade with necessary screws. Complete. |
| 8 | Twin rubber stopper |
| 9 | Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 10 | 125 mm |
| 11 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 12 | 10x80mm |
| 13 | 10x120mm |
| 14 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 15 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 16 | For shutter of doors, windows & ventilators including providing and fixing hinges. pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required. (Fittings shall be paid for separately) |
| 17 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 18 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. |
| 19 | Pre-laminated particle board with decorative lamination on both sides |
| 20 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of Engineer in-charge. (Cost of aluminum snap beading shall be paid in basic items. |
| 21 | With float glass panes of 5.00mm thickness (weight not less that 12.5 kg/sqm) including fixing film of approved sample. |
| 22 | Providing and fixing sliding roller set (double nylon wheels with bearing) suitable for aluminium sliding door track, including necessary fixtures, alignment, testing, and making proper sliding arrangement of aluminium doors, complete as per site condition and direction of Engineer-in-Charge. |
| 23 | Providing and fixing ICE Cube film on existing glass panes of doors and windows, including cleaning of glass surface, cutting to size, pasting with adhesive without air bubbles or wrinkles, and finishing neatly, complete in all respects as per manufacturer’s specification and direction of Engineer-in-Charge. |
