|
| 1 | Providing and fixing C.P. brass ANGLE VALVE CODE -FLR-5053N Jaquar for basin mixer and geyser points of approved quality 15 mm nominal bore. |
| 2 | Providing and fixing C.P. brass wall mixture with tele phonic shower arrangement/bend (Jaquar make code FLR-5273UPR) or Equivalent quality. |
| 3 | Providing and fixing C.P. brass center hole basin mixture with long Casted Swinging Spout of Jaquar or Equivalent quality Make (Code FLR-5001B). |
| 4 | Providing and Fixing C.P. brass bib cock OPP-15037 PM Jaquar make with wall Flange Equivalent Quality conforming |
| 5 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. DAR No-17.33 |
| 6 | Providing and fixing C.P. Brass Two way bibcock heavy quality JAQUAR or Equivalent make including supply of all material, labour T&P etc. complete. |
| 7 | Supply and fixing C.P. Hand Shower (Health Faucet) with 8mm Dia 1.00 mtr. Long Flexible tube & wall hook Jaquar ALD-573 including supply of all material, labour T&P etc. complete. |
| 8 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge DSR NO-17.81 |
| 9 | Supply and fixing of white glazed earthen ware Wash Hand Basin with pedestal ( 550x430x195 mm Qubax ) with C.P Waste jali,, pvc waste pipe, including supply of all materials labour T&P etc. required for proper completion of the work. |
| 10 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p brass screws and washers complete(dar-17.31) |
| 11 | Providing and fixing C.P. Soap Dish of jaquar make including supply of all material, labour T&P etc. complete. |
| 12 | Providing and fixing CP towel Rod OF JAQUAR Make Cat No- ACN-1111SM together with pair of CP brass brackets to fit the towel rail complete. |
| 13 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR NO-13.88 |
| 14 | 12 MM cement plaster of mix ;1:4 ( 1 cement :4 coarse sand ) ) DAR NO-13.4.1 |
| 15 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(D.S.R Item-13.80) |
| 16 | Finishing walls with Acrylic premium Smooth exterior paint with Silicon additives of required shade: New work ( Two or more coats applied @ 1.43ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (apex Ultima, weather coat All guard) asian, berger. ( D.S.R Item 13.47.1 ) |
| 17 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead asper direction of Engineer - in- charge.DAR NO-15.3 |
| 18 | Providing and layeing in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level:1:5:10 (1 cement :5 coasre sand ( Zone-III) :10 graded stone aggregate 40 mm nominal size dar-4.1.10 |
| 19 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved DAR NO-16.91.2 |
| 20 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sam and coarse sand @ 1.289 kg/sqm, This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured.DSR NO-22.6 Please Enable Macros to View BoQ information |
