|
| 1 | Dismantling brick work in cement mortar at all levels by manually / by mechanical means, carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 50m lead all as per specifications and directed by the Engineer-in-charge. |
| 2 | Dismantling of RCC works at all levels by manually / by mechanical means, including Cutting and stacking of steel reinforcement bars and disposal of unserviceable materials within 50m lead as per specifications and directed by the Engineer-in-charge. |
| 3 | Dismantling tile work (thickness of tile upto 25mm) in floors and roofs laid in cement mortar at all levels including stacking material within 50 metres lead complete all as per specifications and directed by the Engineer-in-charge. |
| 4 | Dismantling Plain Cement concrete by manually / by mechanical means at all levels, carefully without damaging adjacent structures including disposal of debris with 50m lead, labour, tools required etc. complete in all respects as per specifications and directed by the Engineer-in-charge. |
| 5 | Earthwork excavation by manual means for foundation, substructures, plinth beam, cess pits & trenches, all kinds of foundation etc.,in all types of soil like hard gravelly soil, sandy soil for the followingdepth from average ground level upto the required founding level, line and grades in both dry and wet conditions including shoring, strutting, bailing out of water if necessary, levelling and ramming the bottom of trenches, dressing of sides, stacking the excavated materials away from the edge of trenches,refilling the sides of foundation as required with selected excavated earth and depositing / disposing the surplus excavated earth (Disposed soil to be levelled by breaking clods, if any and neatly dressed and levelled) within the lead specified below all complete as per specifications and as directed by the Engineer-in-charge. |
| 6 | All kinds of soil with depth upto 1.5m below average Ground level and disposing surplus excavated earth upto a lead of 50 metres. |
| 7 | Providing and fixing / embedding white vitreous Indian water closet Orissa pattern W.C. pan of size 580 x 440mm with integral type footrest of Hindware or equivalent approved make, Excluding the cost of other fittings but including all labour charges etc. complete all as per specifications and as directed by the Engineer-in-Charge. |
| 8 | Providing and fixing in position 100mm dia white glazed vitreous China P or S trap with or without vent holes for urinals and other required location including embedding the trap in cement concrete 1:2:4 using crushed stone sand, including necessary packing with spunyarn & cement mortar for jointing complete all as per specification and as directed by the Engineer-in-Charge. |
| 9 | Providing and laying plain cement concrete 1:2:4 using 20mm maximum size graded aggregates and crushed stone sand including mechanical mixing, transporting and placing in required position, ramming, compaction, levelling, curing, shuttering, dewatering if any, complete all as per specification for levelling courses in foundation for walls, footings, floor drains etc., encasing pipes and other required works directed by Engineer-in-Charge complete all as per specifications. |
| 10 | Providing and fixing 1st quality ceramic floor/wall tiles conforming to IS 15622 of approved make in approved size, shade and colour (as approved by Engineer-in-charge), free from cracks, fissures & flakes with straight edges & perfect corners fixed at right angles as per design and pattern required over a bed of 20mm thick bed of cement mortar 1:4 using crushed stone sand (in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 using crushed stone sand), including machine / hand cutting to required size and shape, pointed neatly with white cement mixed with coloring pigment to match colour of tile, properly finished in all respects, curing, cleaning the surface neatly at the time of handing over the area, all materials and labour complete. Note: The sample tile shall be got approved by the Architect/Engineer before procurement. |
| 11 | In flooring fixing with 20mm thick bedding in cement mortar 1:4 using crushed stone sand. |
| 12 | In Dados and skirting laid over 12mm thick backing in cement mortar 1:3 using crushed stone sand. |
| 13 | Providing and fixing PVC corner beading / nosing of approved quality and colour at the corners and edges of the ceramic tiles dadooing including finishing and embedding in the wall etc. complete all as directed by the Engineer-in-Charge. |
| 14 | Construction of Inspection / valve chamber of following size internally upto 1.00metre depth with brick masonry walls of 230/345mm thick using stock bricks in cement mortar 1:5 using crushed stone sand with necessary brick carbelling as required, plastering with cement mortar 1:3 using crushed stone sand, 12mm thick finished smooth with a floating coat of neat cement inside chamber and with cement mortar 1:5 using crushed stone sand, 12mm thick for external sides of the chamber including excavation in all types of soils, back filling, providing and laying 150mm thick PCC 1:4.5:8 using 40mm size granite aggregates and crushed stone sand for foundation concrete forming benching in PCC 1:2:4 using 20mm maximum size graded aggregate and using crushed stone sand etc. complete all as per specification, drawing and as directed by the Engineer-in-Charge. |
| 15 | Inspection / valve chamber of internal size 600x600mm |
| 16 | Inspection / valve chamber of internal size 900x600mm |
| 17 | Providing and constructing Gully Chamber of internal size 300x300mm including providing, supplying and fixing 150 x 150mm stoneware gully trap with CI grating including excavation in all types of soils, backfilling, embedding in plain cement concrete 1:4.5:8 using 40mm size granite aggregates and crushed stone sand and constructing the above chamber with 115mm thick brick work in cement mortar 1:4 using crushed stone sand with well burnt chamber bricks, plastering over both internal and external faces of brick work with cement mortar 1:3 using crushed stone sand, 12mm thick finished smooth with a floating coat of neat cement on both faces, providing and fixing CI cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design complete all as per specification and as directed by the Engineer-in-Charge. |
| 18 | Conveying the surplus excavated earth & debris, boulders and spoil by mechanical means and depositing at places inside DAE installation identified as Dumping yard as per requirement with a lead specified below including loading, unloading, breaking clods, levelling all complete as per specification and as directed by the Engineer-in-Charge. Note: 1) The rates in respect of this Item are applicable for the NET Quantities arrived at after making deductions for voids @ 20% in respect of soil and @ 50% in respect of Rock from the corresponding Stack / Truck measurements. 2) The earth shall be dumped well inside the Dumping yard and not over approach pathway road. |
| 19 | Lead charges for lead Exceeding 3 kilometre but not exceeding 4 kilometre |
| 20 | Providing and fixing vitreous Floor mounted EWC closet with soft close slim seat designed for specially abled people it should not have a front that is wide and perpendicular to the-floor at the front of the seat with Seat cover, cistern and fittings, [Jaquar of Model DIS-WHT-93753NP180UFSMZ or approved equivalent] with all necessary fittings, fitting accessories and fixtures including all connection, embedding in position, commissioning, cleaning etc. all complete all as per specifications and as directed at site by the Engineer-in-Charge. |
| 21 | Providing and fixing colour vitreous china European type water closet pan of approved pattern of Hindware or approved equivalent make, excluding the cost of other fittings but including necessary screws and jointing complete etc. all as per specifications and as directed by the Engineer-in-Charge |
| 22 | Providing and fixing approved make of white vitreous china wash basin of size 650 x 565 X 155mm designed for specially abled people with curved finish at front including making all connections but excluding the cost of fittings etc. complete all as per specifications and as directed by the Engineer-in-Charge. |
| 23 | Providing and fixing Viterious china white wash basin Jaquar CNS - WHT-705 under counter basin of size 605x430x200 or other equivalent approved make, 32mm Heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting holes on the granite slab and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge. |
| 24 | Providing and fixing PVC nahani trap with PVC grating with perforated holes on top, 110mm inlet and 75mm outlet of ‘Finolex / Prince or other approved equivalent make’ conforming to the relevant IS code heavy quality of self cleaning design including embedding in cement concrete 1:2:4 forming circular holes by providing and fixing 110mm OD PVC pipes of required height up to floor level, levelling and rendering smooth, making good the floor and wall etc., complete as per specifications. (Rate shall include cost of PVC pipe, cement concrete and it shall not be paid extra.) |
| 25 | Providing and laying the following sizes PVC water supply line with Finolex / Varun / Truebore or approved equivalent make PVC pipes suitable for 6 kg/sq.cm pressure and specials conforming & marked to IS:4985 including jointing with PVC jointing compound, laying and fixing the pipes in the excavated trenches, cost of all types of specials such as tees, reducers, coupler, reducing bushes, threaded adaptor, elbow, tail pieces, caps etc., and testing the line as directed by the Engineer-in-Charge. |
| 26 | 40mm outer dia PVC pipe |
| 27 | 50mm outer dia PVC pipe |
| 28 | Providing and fixing Heavy Quality C.P. brass 15mm dia long body Bib cock Jaquar continental / Parryware coral model or approved equivalent as per specifications and as directed by the Engineer-in-Charge. (Samples to be got approved by the Engineer-in-Charge) |
| 29 | Providing and fixing PVC low level / High level white colour flushing cistern 10 litres capacity (Hindware or approved equivalent make) with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge. |
| 30 | Providing and fixing C.P. Brass toilet paper roll holder Recessed type approved with Brass C.P screws of Jaquar make or approved equivalent make and type as directed by the Engineer-in-Charge complete. |
| 31 | Providing and fixing 5mm thick first quality mirror of required size with anodized aluminium section frame work of size 30 x 20mm, backing the mirror with 4mm thick AC plain sheet painting two coats of plastic emulsion paint over a coat of primer, fixing the entire unit on the wall surface with necessary screws etc. complete all as directed by the Engineer-in-Charge. |
| 32 | Providing and fixing C.P Brass towel rail 600mm long of Jaquar make complete fixed to walls with 30mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-Charge. |
| 33 | Providing and fixing Heavy Quality C.P Brass Health Faucet with 1.50metres flexible hose (Hand Shower) of Jaquar continental model or approved equivalent make and type complete all as per specifications and as directed by the Engineer-in-Charge (Samples to be got approved by the Engineer-in-Charge) |
| 34 | Providing and fixing Heavy Quality 15mm nominal bore C.P. Brass Angle cock of ‘ESSCO / PLATO’ or approved equivalent make for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-Charge (Samples to be got approved by the Engineer-in-Charge) |
| 35 | Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15mm dia 450mm long as per specifications and as directed by the Engineer-in-Charge. |
| 36 | Providing and laying approved quality mirror polished Granite slabs for flooring & Skirting of required size & specified colour, pattern and free from cracks, fissures & flakes with straight edges & perfect corners laid at right angles as per pattern over a bedding of cement mortar 1:4 using crushed stone sand, 20mm thick (or backing of cement mortar 1:3 using crushed stone sand, 12mm thick as mentioned below) pointed neatly with white cement mixed with coloring pigment to match colour of slab and finished in all respects, including machine / hand cutting to required size and shape, moulding and polishing of exposed edges, fixing stone to level and plumb, anti-skid grooves for steps, curing, cleaning the surface neatly at the time of handing over the area, all materials and labour complete. Note: The sample Granite slab shall be got approved by the Architect/Engineer before procurement. |
| 37 | In flooring 18mm thick Granite slab fixing with 20mm thick bedding in cement mortar 1:4 using crushed stone sand. |
| 38 | Providing and constructing at all floors and lifts 115mm thick brick work in cement mortar 1:4 using well burnt stock bricks including providing and placing in position 2 nos of 8mm dia rods at every 4th layer, scaffolding, curing, racking out the joint on both faces etc. complete all as per specification and as directed by the Engineer-in-Charge. |
| 39 | Above FFL to Five floor level [Each floor height 3.75m] |
| 40 | Providing plastering to the internal surfaces of brickwork/concrete at all elevations/levels in cement mortar 1:5 using crushed stone sand, 12mm thick including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications and as directed by the Engineer-in-Charge. |
| 41 | Providing and applying painting Two coats at all levels with premium Plastic emulsion paint of (Asian or Equivalent approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, applying putty (putty for touch up to fill up crevices, mild depression etc.), scaffolding complete all as per specifications and as directed by the Engineer-in-Charge. |
| 42 | Providing and constructing brick masonry at all lifts using well burnt stock bricks / Flyash bricks in cement mortar 1:6 using crushed stone sand including suitable scaffolding, raking out joints, curing complete as per specifications and drawings for foundation, superstructure, etc. for the following |
| 43 | Above FFL to Five floor level [Each floor height 3.75m] |
| 44 | Providing and fixing glazing 5mm thick tinted colour Float glass pane in aluminium doors, window, ventilator shutters and partitions etc with Neoprene gasket including cost of neoprene gasket complete as per the drawings and directions of the Engineer-in-Charge. |
| 45 | Providing and fixing anodized aluminium (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections and other sections of approved make confirming to IS:733 and IS:1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per architectural drawings and and directions of Engineer-in-charge including making provision for fixing of fittings wherever required. (fittings, Glazing and panelling shall be paid for separately) Note : 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for. |
| 46 | Providing and fixing ISI marked 35mm thick non-decorative type flush door shutters (single or double leaf and size as per requirement) conforming to IS : 2202, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering, phenol formaldehyde synthetic resin bonded, hot pressed with internal Teak wood lipping of 25mm depth on all sides and fixing with 4 Nos. 150mm Stainless steel Hinges with suitable S.S. screws (8 Nos. 150mm Stainless steel Hinges with S.S. screws for double leaf), Brass aldrop 250mm long complete set with suitable brass screws (2 nos. complete set of brass aldrop 250mm long with brass screws for double leaf), 300mm long brass tower bolt with screws (2 nos 300mm long brass tower bolt with screws for double leaf), 150mm long brass door handle set with brass screws (2 nos. 150mm long brass door handle set with brass screws for double leaf) complete at all lifts and all as directed by the Engineer-in-charge. |
| 47 | Providing and fixing Second class Teak wood work in frames of doors, windows, clerestory openings and other frames, wrought framed, fixed in position of required size and shape including sawing, jointing, making rebates for shutters, making grooves as shown in the drawings, architectural beading with teakwood 50x6mm alround, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 300mm long, 5mm thick or with rawl plugs and screws including protective painting to the surface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-Charge. |
| 48 | Providing and laying cast insitu controlled reinforced cement concrete of specified grade at all levels and lifts mentioned below using 20mm maximum size hard granite machine crushed graded stone aggregates and crushed stone sand including weigh batching, charges for mixing & cost of admixture, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth of all exposed faces complete for column footings, columns, lintels, sunshades, gutter slabs, beams, slabs, water tank, machine foundation and all other structural elements including dewatering wherever necessary (Formwork and reinforcement will be paid for separately) all as per specification and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item. Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture conforming to IS 9103 shall be mixed in fresh concrete and prior permission from Engineer-in-charge shall be obtained for dosage and compatibility 2. Test certificate of cement, procured from dealer/company to be submitted for all cement related works by the Contractor. 3. The rate shall be quoted on the basis of using minimum cement per cu.m. of concrete mentioned below for relevant grade of concrete. Any upward/downward variation required to obtain the specified strength will be paid for or deducted at the rate of cement specified in Schedule F. |
| 49 | M30 grade with 370 kg. of cement per cu.m. of concrete upto five floors (Each floor height 3.75m) |
| 50 | Providing, straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement at all levels TMT bars of Fe500D grade steel conforming to IS:1786 SAIL or VIZAG or approved equivalent make and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying and fixing the spacer/cover blocks in cement mortar 1:2 and binding wire complete all as per specification and as directed by the Engineer-in-charge at all lifts. Note: The rate shall be including the cost of reinforcement steel. The reinforcement steel will be procured from dealers with a test certificate as approved by the department. For further details please see point 7 of Section VIII, General Information for Guidance of Tenderers. |
| 51 | Supplying, fabricating, erecting and fixing in position at all levels, centering and shuttering to correct line and levels including strutting, propping, etc., with necessary bracings in all axes to give a stable assembly with provision for making the joints in the shuttering fully leak proof and with provision for fixing coil nuts with tie rods along with suitable channel for lateral supports and for inserts, projecting dowels, anchor bolts or any other fixture, including staging, access and working platforms etc., all complete as specified and directed including dismantling and removing the aforesaid assembly after the concrete attains the sufficient strength to self-support itself without cracking and distortion all as per specification, including all materials and labour complete in all respects at all lifts. The measurement for the formwork will be the actual area of forms in contact with concrete surfaces. Shuttering with plywood panels alone will be permitted. |
| 52 | Providing and applying painting Two coats at all levels Acrylic emulsion paint (ACE or Equivalent approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, applying putty (putty for touch up to fill up crevices, mild depression etc.), scaffolding complete all as per specifications and as directed by the Engineer-in-Charge. |
| 53 | Providing and fixing 4 Lever Dead/Mortice Lock ‘Godrej/Everite’ or other approved equivalent make suitable for aluminium door with a pair of keys complete all as per specification and drawings. |
| 54 | Providing and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts Everite/ Hardwyn or approved equivalent make complete as per specifications and as directed by the Engineer-in-Charge. |
| 55 | Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like MS structural embedment’s/pipe and sleeves/penetration etc. using MS angles, channels, I-sections, plates, tees, flats, rounds, sag rod, square sections etc. including chamfering and rounding off the edges, applying painting as described below of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge. Note: 1. Lifting device arrangements if any required also arranged by the contractor at his own cost. 2. Painting two coats of polyurethane paint with one under coat of suitable Epoxy/PU primer of approved make and colour as directed by the Engineer-in-Charge. |
| 56 | Attending and arresting the leakages in the floor traps including dismantling the surrounding PCC to required size and making holes on the wall and changing the trap and fixing the waste lines, providing PCC and plastering to the original shape complete all as directed by the Engineer-in-Charge. |
| 57 | Replacing the damaged CI soil waste pipe by supplying, laying and fixing of SWR-uPVC pipe lines laid, embedded under floor slab and fixed to walls wherever required using Finolex or approved equivalent make of SWR uPVC pipes - Type B (suitable for soil and waste discharge system having wall thickness of minimum 3.2 to maximum 3.8mm) conforming to IS:13592 - latest edition with ISI mark and PVC pasting type specials such as door bends, door tees and cowls etc. heavy quality for soil waste or vent or antisyphonage PVC pipe including removing the damaged CI pipe, chipping/removing the embedded pipe if any, fixing the new PVC pipe with suitable clamps over Teak Wood packing pieces, restoring the same to its original condition, disposal of debris within a initial lead, stacking of retrieved CI pipes at IGCAR pump house etc., all complete as per specification and as directed by Engineer-in-Charge. |
| 58 | 110mm OD SWR-uPVC (Type B) pipes and specials |
| 59 | 75mm OD SWR-uPVC (Type B) pipes and specials |
| 60 | Providing and fixing Chlorinated PVC (CPVC) pipes for concealed pipeline work having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps including chasing the walls, concealing the pipes and making good the same etc. This included jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Engineer-in-Charge. |
| 61 | 25mm outer dia CPVC pipe |
| 62 | Supplying and fixing of following size of uPVC pipe of SCH 40 of make ASTRAL/PRINCE/Finolex or approved equivalent make conforming to relevant ASTM D 1785 standards including all UPVC Plain & Brass threaded fittings confirmed to ASTM D 2466/ ASTM D 2467, fixing the pipe with clamps at 1.00 m spacing including cutting, threading and jointing with uPVC cement solvent, Teflon tape making necessary opening/chasing of the wall, flooring and making the work place to the original condition etc., and testing the line as directed by the Engineer-in-Charge. |
| 63 | 25mm nominal size uPVC pipe of SCH 40 |
| 64 | 50mm nominal size uPVC pipe of SCH 40 |
| 65 | Providing and fixing following dia uPVC ball valve pasting/thread type of make ASTRAL/PRINCE/Finolex or approved equivalent make including the cost of labour charges, pasting solution etc., complete all as directed by the Engineer-in-Charge. |
| 66 | 25mm nominal size uPVC Ball valve |
| 67 | 50mm nominal size uPVC Ball valve |
| 68 | Removing the sanitaryware fittings (wash basin, EWC ,Urinal etc.) including all fixtures and accessories (bib cock, pillar cock, Angle valve, health fuacet etc.) without damaging the sanitarywares and handing over to department stock yard including labour, tool and lead charges etc., complete all as directed by the Engineer-in-Charge. |
| 69 | Retriving and removing the existing water pipe lines of various diameter (ranging 15mm to 50mm) including chipping and making groove carefully without damaging the walls and structures including the cost of labours, tools, equipment’s etc., complete all as directed by the Engineer-in-Charge. |
| 70 | Providing and fixing Push Button Soap Dispenser in PVC container (liquid soap dispenser) SDR-WHT-DJ0010FN from JAQUAR or approved equivalent make with all accessories including necessary screws for fixing complete all as directed by the Engineer-in-Charge. |
| 71 | Providing and fixing in position glass shelf with Stainless Steel framework and clamps ‘Jaquar AQN-CHR-7771 or approved equivalent make’ including required fittings and brackets, screws etc. complete all as directed by Engineer-in-Charge. |
| 72 | Providing and fixing Heavy Quality C.P Brass Foot operated push cock with suitable accessories of connection hose, swan neck spout, chech nuts, screws etc., of ‘Jaquar or any other approved equivalent make and type’ etc., complete all as per specifications and as directed by the Engineer-in-Charge (Samples to be got approved by the Engineer-in-Charge.) |
| 73 | Providing and fixing 32mm size bottle trap with internal partition with 300mm and 190mm long wall connection pipe and wall flange (Jaquar ALD-CHR-769L300X190 or approved equivalent) including required fittings and brackets, cutting holes on the granite slab and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-Charge. |
| 74 | Providing and fixing Heavy Quality C.P. brass 15mm dia Two Way Bib cock Jaquar or approved equivalent as per specifications and as directed by the Engineer-in-Charge. (Samples to be got approved by the Engineer-in-Charge) |
| 75 | Providing and fixing Stainless steel double coat hook Jaquar ACN-CHR-1161N or other approved equivalent make’ including required fittings and brackets, screws etc. complete all as directed by the Engineer-in-Charge. |
| 76 | Supplying and fixing of FRP manhole frame and cover as below mentioned size and capacity for the inspection chamber, valve chamber, water tank and other required location including transportation, making necessary holes for fixing, fixing at position with levels and alignment, cement mortar 1:3 to packing and finishing, etc. complete all as per specification and instruction of the Engineer-in-Charge. Note: FRP items shall be UV stabilised. |
| 77 | 300 x 300mm size with load carrying capacity of 2.5 tonnes |
| 78 | 600 x 600mm size with load carrying capacity of 25 tonnes |
| 79 | 600 x 900mm size with load carrying capacity of 25 tonnes |
| 80 | Supplying and fixing in position single leaf/double leaves of 28mm thick non decorative type factory made Wood Polymer Composite (WPC) solid door shutters confirmed ti IS:2380 latest having density of minimum 650 Kg/Cum, screw withdrawal strength of 1500 N at face and 1000 N at edge, water absorption less than 1%, Class A fire resistance and tensile strength greater than 12 MPa including fixing required hardware fittings, fixing door using required screws, including providing recessions for hinges, finishing all edges with mixture of PVC powder & solvent for smooth finish, The door shutter shall be fixed with the following hardware fittings: - a) 4 Nos. of 75 mm long stainless steel butt hinges of GARG brand bearing ISI mark with suitable stainless steel screws. b) Two numbers of 125mm long anodised of make aluminium D handle Classic/Crown or approved equivalent as per IS - 208 bearing ISI mark with suitable CP screws. c) Two numbers of 150mm long stainless steel baby latch type/cranked type tower bolt with suitable CP screws. d) One number of 50mm long solid PVC door buffer with 75mm long CP screws. Note: - 1) All furniture fittings shall be of approved quality and make. 2) The rate quoted shall be inclusive of fixing of door shutters with required hardware fittings as detailed above. 3) The PVC Integral Foam shall be factory manufactured solid section of light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides. 4) The entire door shall be jointless shutter. 5) The sizes shall be approximately 700 mm x 2100mm, however exact dimensions shall be measured at site before manufacturing etc., all complete as per specifications and as directed by Engineer-In-Charge. |
| 81 | Supplying and fixing in position 75mmx50mm size Wood Polymer Composite (WPC) solid door frame confirmed ti IS:2380 latest having density of minimum 850 Kg/Cum, screw withdrawal strength of 2000 N at face and 1600 N at edge, water absorption less than 1%, Class A fire resistance and tensile strength greater than 12 MPa including fixing required hardware fittings, required screws, etc., all complete as per specifications and as directed by Engineer-In-Charge. |
| 82 | Dismantling doors, windows and clear storey openings (Steel /wood) shutter at all levels including chowkhats, architraves, holdfasts etc. complete and stacking within 50m lead (Full windows) of area 3.00 sq.m and below all as per specifications and directed by the Engineer-in-charge. Note: Subsequently the Dismantled Doors & Windows should be transported and stacked in M&MWS stack yard or as place specified by the Engineer-in-Charge. |
| 83 | Providing, fabricating and fixing hand rail or other required member using 304 grade Stainless Steel pipes, Square sections, plates etc. of approved size and make and quality by cutting to required size, welding, mirror / matt polishing , fixing at site etc. for balcony railing & staircases railing and other required members including special sections as per drawings, specifications complete. A sample to be fabricated and to be got approved by the Engineer-in-Charge before starting of work at site. This work to be executed through approved specialized agency. |
| 84 | Providing and fixing Stainless steel Grab Bar 450mm long ‘Jaquar AHS-CHR-1503 or approved equivalent make’ with all accessories including necessary screws for fixing complete all as directed by the Engineer-in-Charge. |
| 85 | Providing and fixing Grab Bar Vertical Swing 360 Rotation ‘Jaquar WAC-SAP-BG0800CSN or approved equivalent make’ with all accessories including necessary screws/bolt and nut for fixing complete all as directed by the Engineer-in-Charge. |
| 86 | Providing and fixing of Heavy Quality 15mm nominal bore C.P. Brass Pillar cock with extended lever handle complete [Jaquar florentine prime or approved equivalent] all as per specifications and as directed by the Engineer-in-Charge. (Samples to be got approved by the Engineer-in-Charge) |
| 87 | Removing and refixing the door & window shutters/ frames, false ceiling, glass partition, shifting of all damaged materials including necessary repair works like planning, replacing the damaged wooden frames/styles including replacing wornout screws with new once all complete as directed by the Engineer. (Necessary screws and hardware item will be supplied by the Department at free of cost). Note Teakwood quantity paid separately under relevant item. |
| 88 | Providing and applying painting Two coats on wood work and other required internal surface at all levels with Synthetic enamel paint (Asian or approved brand, colour and manufacturer) to give an even shade including one under coat of suitable primer, preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge. |
| 89 | Providing and fixing of ‘Sliding assembly set heavy duty (70kg) with steel bracket, G- type - Triple ball bearing roller - 1 set’ for sliding door including necessary stopper, screws, fixing labours etc., complete all as directed by the Engineer-in-Charge. |
| 90 | Providing and fixing of anchor bolt at all levels ‘Hilti or approved equivalent’ in to RCC beams, columns, slab and other RCC members of below mentioned anchor bold grade, anchor size and anchor length including drilling, injecting / grouting with Injectable epoxy mortar suitable for rebar connections and heavy-duty anchoring ‘HIT-RE 500 V4 or approved equivalent’ inclusive of all machinery and man power, scaffolding etc. complete all as directed by the Engineer-in-Charge. |
| 91 | Zinc plated carbon steel Anchor bolt (Hilti HIT-Z), anchor size M12, anchor length 105mm |
| 92 | Making jointing the structural steel materials at a height of 0-5m like beam, channel, angles, shaft, flat etc. by fillet / Butt welding 6mm thick as suitable using SMAW process with E7018 electrode of approved make, liquid penetrant(LP) examination of root and final weld pass including grinding the existing painted, rusted surface to enable perfect welding as directed by the Engineer-in-Charge. |
| 93 | Providing and fixing 4mm thick plywood in position including required screws, nails, cutting to the required size & shape complete etc. as directed by Engineer-in- Charge. |
| 94 | Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling at all levels including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. |
| 95 | Providing and fixing under ground selfit SN 8 sewer pipes of following diameter conforming to IS:15328 including suitable Fittings & specials confirming to IS:15328, ‘Finolex’ or other approved equivalent make of stiffness class 8 KN/SQ.M and minimum wall thickness of 5.9 mm including jointing with seal ring / with PVC solvent adhesive including fixing in walls/columns using clamps, anchor fasteners, bolts and teakwood packing pieces, joint testing etc. complete all as per drawings, specifications and as directed by the Engineer-in-Charge. |
| 96 | 315mm nominal size |
| 97 | Supply and installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with required Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers,Copper Clips, Copper Conductor, GI Wire etc, in Floor, Walls, Brick, Block Masonry, etc. including chasing & replasteringas per the detailed specification. .(Refer Sec VI, Clause No.27). |
| 98 | 25 mm Dia 1.8mm, wall thickness Heavy Duty ERW Conduits with 50mm deep junction boxes |
| 99 | Supply and Embedment of 50mm Deep, Square/Rectangular Concealed type and GI double earthed modular metal boxes of the following types and as specified in RCC/Brick/Concrete Block Masonry with finishing and making good as per the detailed specification. (Refer Sec VI, Clause No.15.12). |
| 100 | ONE/TWO Module, 1.2mm thickness |
| 101 | THREE Module, 1.2mm thickness |
| 102 | FOUR Module, 1.2mm thickness |
| 103 | SIX Module, 1.2mm thickness |
| 104 | Removal of 1.5 or 2.5 or 4 sq.mm aluminium/copper wire on existing embedded roof or wall conduits and disposal to the central stores as per the scope of work. (Refer Section V) |
| 105 | Removal of light fixtures in labs and low bay areas |
| 106 | Removal of various sizes ofswitch box from the wall(Refer V). |
| 107 | Overall rebate (Optional) |
| 108 | INR Zero Only |
