Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Fencing for Goshala Cow Shelter Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 2 | Fiilling in foundation & plinth with sand, incl. watering & ramming as per direction of Engr.-in-charge |
| 3 | C.C.(1:4:8) with 40mm CBHG metal in F & P including cost,carriage of materials etc complete |
| 4 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Geade Beam |
| 5 | Labour for M.S reinforcement for R.C.C. Work incl. cutting, bending, binding, straightening & tying the grills and placing in position incl. cost of binding wire 18 to 20 gauge |
| 6 | Providing & Fixing of M.S Angle post for fencing support conforming to Govt. testing with height 1.80 mtr and dimension (45mm * 45mm * 6mm) and weight 7 kg per post to be constructed for vertical support of compound fencing complete with all cost, conveyance and lobour of materals etc complete as per the guidence of Eng-in-charge |
| 7 | Providing & Fixing of Galvanized steel chain link fence of minimun diameter 4mm of wire of required length with minimun height 1.5mtr above average ground level. The minimun weight per swmt of this galvanized steel chain link fence should not be lessthen 4.5kg/ sqmt and tensile stength between 400 to 500 M. pa. conforming tp IS-2721 including all cost of labour charges etc complete. (Rs.25.00 per kg + 25% added labour charges) |
| 8 | Fencing for free Roaming Yard and Cultivation Field Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 9 | C.C.(1:2:4) with 12mm CBHG chips for C.C Work including hoisting & laying including cost,carriage and royalty of materials. |
| 10 | Providing & Fixing of M.S Angle post for fencing support conforming to Govt. testing with height 1.80 mtr and dimension (45mm * 45mm * 6mm) and weight 7 kg per post to be constructed for vertical support of compound fencing complete with all cost, conveyance and lobour of materals etc complete as per the guidence of Eng-in-charge |
| 11 | Providing & Fixing of Galvanized steel chain link fence of minimun diameter 4mm of wire of required length with minimun height 1.5mtr above average ground level. The minimun weight per swmt of this galvanized steel chain link fence should not be lessthen 4.5kg/ sqmt and tensile stength between 400 to 500 M. pa. conforming tp IS-2721 including all cost of labour charges etc complete. (Rs.25.00 per kg + 25% added labour charges) |
| 12 | Paved Driveway and Walking Pathway Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 13 | Fiilling in foundation & plinth with sand, incl. watering & ramming as per direction of Engr.-in-charge |
| 14 | C.C.(1:4:8) with 40mm CBHG metal in F & P including cost,carriage of materials etc complete |
| 15 | C.C.(1:2:4) with 12mm CBHG chips for C.C Work including hoisting & laying including cost,carriage and royalty of materials. |
| 16 | Providing, laying, spreading and compacting graded above aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406 of MoSRT & H specification for road works. |
| 17 | Supply and installation of exposed K.B. Bricks (Size 25 * 12* 8cm) over compacted earth with all cost of materials etc complete. |
| 18 | Supply and installation of inter locking C.C. Paver Block (60mm) thick of M-30 grade made by block making machine over and i/c 50mm thick bed of cement sand, filling the joints. |
| 19 | Construction of Decorative RCC Gate Canopy Structure and Gate Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 20 | Fiilling in foundation & plinth with sand, incl. watering & ramming as per direction of Engr.-in-charge |
| 21 | C.C.(1:4:8) with 40mm size CBHG metal in F & P including cost,carriage of materials etc complete |
| 22 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Column Base |
| 23 | b) Column, Roof Beam |
| 24 | Labour for M.S reinforcement for R.C.C. Work incl. cutting, bending, binding, straightening & tying the grills and placing in position incl. cost of binding wire 18 to 20 gauge |
| 25 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete |
| 26 | 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slurry treatment |
| 27 | 16mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 28 | Providing & fixing of 10mm thick Granite tiles in Wall on 25mm thick cement slurry mixed meter (1:1) jointed with cement slurry mixed with pigments to match the shade of the tiles complete with cost, conveyace of all materials etc complete. |
| 29 | Supplying & Fixing of M.S. grills made out of angle frames & iron sheets with cost, conveyance of materials etc. complete. |
| 30 | Painting two coats over a coat of priming with any approved paint over new iron work with cost, conveyance of materials etc. complete |
| 31 | NECESSARY BUILDING\"S Staff Quarter Earthwork in excavation of foundation in hard soil with all leads and lift including dressing & levelling the bed etc complete |
| 32 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 33 | C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 34 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete a) F & P |
| 35 | B) Super Structure |
| 36 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Column Base |
| 37 | b) Grade Beam |
| 38 | c) Column, Roof Beam |
| 39 | d) Lintel |
| 40 | e) Chajja |
| 41 | f) Roof Slab |
| 42 | Labour for M.S reinforcement for R.C.C. Work incl. cutting, bending, binding, straightening & tying the grills and placing in position incl. cost of binding wire 18 to 20 gauge |
| 43 | Supplying & Fixing of M.S. doors & windows shutter made out of angle frames & iron sheets with cost, conveyance of materials etc. complete. |
| 44 | Dressed seasoned sal wood work framed & fixed (wrought & put up) in trusses, purlins frames of doors & windows with cost of wood etc. complete. |
| 45 | Providing and fixing ISI Marked 35mm thick flush door shutters finished with 1.0mm thick laminate on both side conforming to IS:2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood inclussive of 4 nos. of stainless steel butt hinges (100mm * 60mm* 2.5mm), 40mm stainless steel screws, 2 nos brass tower bolt (200mm * 10mm), 1 no. brass floor type door stopper (150mm), teak wood lipping around the edges, 1 no. automatic door closure and 6 lever mortice lock with pair of handle, etc. including the cost of all materials, hardware fittings, cost of all labour, conveyance, taxes, loading, unloading, T & P, etc. complete as per the direction of Engineer-in-Charge. |
| 46 | Providing and Fixing ISI Marked WPC Door with 4\"*2.5\" section WPC choukhats and both side laminated with 1 mm th laminate shutters confirming to IS 2202 ( Part 1) of 27mm thickness including ISI marked necessary hardware fitting with approved colour paint over a coat of primer etc and hardware fittings such as SS Concil Hinges (5\"), stopper, SS Tower bolt-8\", Handle with knob, door clouser etc. including cost of all labours, materials, conveyance, hardware fixing, loading and unloading, sundries and T & P etc all complete as per direction of the Engineer-in-charge. (TOILET) excluding gst. |
| 47 | Supplying & Fixing of M.S. grills made out of angle frames & iron sheets with cost, conveyance of materials etc. complete. |
| 48 | Supplying & Fixing of W.I. Clamps 25cm to 30cm. Long of 35mm * 5mm size for doors & windows including fixing in C.C.(1:3:6) including cost of all materials etc complete. |
| 49 | Providing 6mm thick cement plaster in cement mortar of (1:4) to RCC Surfaces such as ceiling of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening/ chipping, scraping and cleaning and finishing the plastered surface smooth using wooden floats, bars, etc. only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawing including cost of all materials, conveyance, loading and unloading, taxes, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T & P etc. complete as per direction of the Engineer-in-charge |
| 50 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 51 | 16mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 52 | 2.5cm thick AS Flooring with C.C.(1:2:4) incl. punning using 12mm size CBHG chipswith cost, carriage, royalty of materials etc. complete |
| 53 | 12mm thick cement plaster in CM(1:4) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 54 | Painting two coats over a coat of primer with any approved paint over new iron work with cost, conveyance of materials etc. complete. |
| 55 | Distempering 2 coats to walls with distemper of approved shade on new work to give an even shade including cost of labour & distemper etc. complete. |
| 56 | Finishing walls with water proofing cement paint of approved shade on new work (2 coats) to give an even shade including cost of paint & labour etc. complete. |
| 57 | Milk Processing Unit Earthwork in excavation of foundation in hard soil with all leads and lift including dressing & levelling the bed etc complete |
| 58 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 59 | C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 60 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete a) F & P |
| 61 | B) Super Structure |
| 62 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Column Base |
| 63 | b) Grade Beam |
| 64 | c) Column, Roof Beam |
| 65 | d) Lintel |
| 66 | e) Chajja |
| 67 | f) Roof Slab |
| 68 | Labour for M.S reinforcement for R.C.C. Work incl. cutting, bending, binding, straightening & tying the grills and placing in position incl. cost of binding wire 18 to 20 gauge |
| 69 | Supplying & Fixing of M.S. doors & windows shutter made out of angle frames & iron sheets with cost, conveyance of materials etc. complete. |
| 70 | Dressed seasoned sal wood work framed & fixed (wrought & put up) in trusses, purlins frames of doors & windows with cost of wood etc. complete. |
| 71 | Providing and fixing ISI Marked 35mm thick flush door shutters finished with 1.0mm thick laminate on both side conforming to IS:2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood inclussive of 4 nos. of stainless steel butt hinges (100mm * 60mm* 2.5mm), 40mm stainless steel screws, 2 nos brass tower bolt (200mm * 10mm), 1 no. brass floor type door stopper (150mm), teak wood lipping around the edges, 1 no. automatic door closure and 6 lever mortice lock with pair of handle, etc. including the cost of all materials, hardware fittings, cost of all labour, conveyance, taxes, loading, unloading, T & P, etc. complete as per the direction of Engineer-in-Charge. |
| 72 | Providing and Fixing ISI Marked WPC Door with 4\"*2.5\" section WPC choukhats and both side laminated with 1 mm th laminate shutters confirming to IS 2202 ( Part 1) of 27mm thickness including ISI marked necessary hardware fitting with approved colour paint over a coat of primer etc and hardware fittings such as SS Concil Hinges (5\"), stopper, SS Tower bolt-8\", Handle with knob, door clouser etc. including cost of all labours, materials, conveyance, hardware fixing, loading and unloading, sundries and T & P etc all complete as per direction of the Engineer-in-charge. (TOILET) excluding gst. |
| 73 | Supplying & Fixing of M.S. grills made out of angle frames & iron sheets with cost, conveyance of materials etc. complete. |
| 74 | Supplying & Fixing of W.I. Clamps 25cm to 30cm. Long of 35mm * 5mm size for doors & windows including fixing in C.C.(1:3:6) including cost of all materials etc complete. |
| 75 | Providing 6mm thick cement plaster in cement mortar of (1:4) to RCC Surfaces such as ceiling of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening/ chipping, scraping and cleaning and finishing the plastered surface smooth using wooden floats, bars, etc. only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawing including cost of all materials, conveyance, loading and unloading, taxes, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T & P etc. complete as per direction of the Engineer-in-charge |
| 76 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 77 | 16mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 78 | 2.5cm thick AS Flooring with C.C.(1:2:4) incl. punning using 12mm size CBHG chipswith cost, carriage, royalty of materials etc. complete |
| 79 | 12mm thick cement plaster in CM(1:4) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 80 | Painting two coats over a coat of primer with any approved paint over new iron work with cost, conveyance of materials etc. complete. |
| 81 | Distempering 2 coats to walls with distemper of approved shade on new work to give an even shade including cost of labour & distemper etc. complete. |
| 82 | Finishing walls with water proofing cement paint of approved shade on new work (2 coats) to give an even shade including cost of paint & labour etc. complete. |
| 83 | Cow Shed Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 84 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 85 | P.C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 86 | Providing, laying, spreading and compacting graded above aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406 of MoSRT & H specification for road works. |
| 87 | Supply and installation of exposed K.B. Bricks (Size 25 * 12* 8cm) over compacted earth with all cost of materials etc complete. |
| 88 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete a) F & P |
| 89 | B) Super Structure |
| 90 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Plinth Beam |
| 91 | b) Lintel |
| 92 | Labour for M.S reinforcement for R.C.C. Work incl. cutting, bending, binding, straightening & tying the grills and placing in position incl. cost of binding wire 18 to 20 gauge |
| 93 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 94 | Supply and Installation of TATA Blue Scope Colorbond, Profile specification: 31 mm depth and 200mm pitch, covered width of 1000mm and a overall width of 1060mm and Technical Specification :- Special polyester color coating of 20 micron (DFT) on exposed surface and 5 micron (DFT) of polyester primer on both surface on CRCA Steel of minimum yield strength of 550 Mpa with hot dip coating of 150gm mass of alloy of 55% Aluminum, 43.5% Zinc, and 1.5% Silicon, (AZ150) Conforming to ASTMA 792M-02/AS1397, Crimping of Sheet:- As per bending radius and Sheet Fixation Work:- Using Self Drill Screw of HILTI make:- Smd03K 5.5 * 63 & V-16 Washer with Accessory:- Gutter, Flashing, Fascia, Corner, etc with support metal Structure made with Steel trusses and purlins as per approved design made out of different size of angles with cost, conveyance of materials etc complete. (As per Market Rate Approxmately) |
| 95 | Calf Rearing, Veterinary Doctor Office, Surgery & Treatment and Isolation Shed Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 96 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 97 | C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 98 | Providing, laying, spreading and compacting graded above aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406 of MoSRT & H specification for road works. |
| 99 | Supply and installation of exposed K.B. Bricks (Size 25 * 12* 8cm) over compacted earth with all cost of materials etc complete. |
| 100 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete a) F & P |
| 101 | B) Super Structure |
| 102 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Plinth Beam |
| 103 | b) Lintel |
| 104 | Labour for M.S reinforcement for R.C.C. Work incl. cutting, bending, binding, straightening & tying the grills and placing in position incl. cost of binding wire 18 to 20 gauge |
| 105 | Supplying & Fixing of M.S. doors shutter made out of angle frames & iron sheets with cost, conveyance of materials etc. complete. |
| 106 | Supplying & Fixing of M.S. grills and grill gate made out of angle frames with cost, conveyance of materials etc. complete. |
| 107 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 108 | 16mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 109 | 2.5cm thick AS Flooring with C.C.(1:2:4) incl. punning using 12mm size CBHG chipswith cost, carriage, royalty of materials etc. complete |
| 110 | Supply and Installation of TATA Blue Scope Colorbond, Profile specification: 31 mm depth and 200mm pitch, covered width of 1000mm and a overall width of 1060mm and Technical Specification :- Special polyester color coating of 20 micron (DFT) on exposed surface and 5 micron (DFT) of polyester primer on both surface on CRCA Steel of minimum yield strength of 550 Mpa with hot dip coating of 150gm mass of alloy of 55% Aluminum, 43.5% Zinc, and 1.5% Silicon, (AZ150) Conforming to ASTMA 792M-02/AS1397, Crimping of Sheet:- As per bending radius and Sheet Fixation Work:- Using Self Drill Screw of HILTI make:- Smd03K 5.5 * 63 & V-16 Washer with Accessory:- Gutter, Flashing, Fascia, Corner, etc with support metal Structure made with Steel trusses and purlins as per approved design made out of different size of angles with cost, conveyance of materials etc complete. (As per Market Rate Approxmately) |
| 111 | Painting two coats over a coat of primer with any approved paint over new iron work with cost, conveyance of materials etc. complete. |
| 112 | Finishing walls with water proofing cement paint of approved shade on new work (2 coats) to give an even shade including cost of paint & labour etc. complete. |
| 113 | Education & Research & Training Center Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 114 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 115 | P.C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 116 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete a) F & P |
| 117 | B) Super Structure |
| 118 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Plinth Beam |
| 119 | b) Lintel |
| 120 | Labour for M.S reinforcement for R.C.C. Work incl. cutting, bending, binding, straightening & tying the grills and placing in position incl. cost of binding wire 18 to 20 gauge |
| 121 | 6mm thick cement plaster in CM (1:4) over PCC Work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 122 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 123 | 16mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 124 | 2.5cm thick AS Flooring with C.C.(1:2:4) incl. punning using 12mm size CBHG chipswith cost, carriage, royalty of materials etc. complete |
| 125 | Supply and Installation of TATA Blue Scope Colorbond, Profile specification: 31 mm depth and 200mm pitch, covered width of 1000mm and a overall width of 1060mm and Technical Specification :- Special polyester color coating of 20 micron (DFT) on exposed surface and 5 micron (DFT) of polyester primer on both surface on CRCA Steel of minimum yield strength of 550 Mpa with hot dip coating of 150gm mass of alloy of 55% Aluminum, 43.5% Zinc, and 1.5% Silicon, (AZ150) Conforming to ASTMA 792M-02/AS1397, Crimping of Sheet:- As per bending radius and Sheet Fixation Work:- Using Self Drill Screw of HILTI make:- Smd03K 5.5 * 63 & V-16 Washer with Accessory:- Gutter, Flashing, Fascia, Corner, etc with support metal Structure made with Steel trusses and purlins as per approved design made out of different size of angles with cost, conveyance of materials etc complete. (As per Market Rate Approxmately) |
| 126 | Finishing walls with water proofing cement paint of approved shade on new work (2 coats) to give an even shade including cost of paint & labour etc. complete. |
| 127 | Dry Hay Fodder Storage Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 128 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 129 | P.C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 130 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete a) F & P |
| 131 | B) Super Structure |
| 132 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Plinth Beam |
| 133 | b) Lintel |
| 134 | Labour for M.S reinforcement for R.C.C. Work incl. cutting, bending, binding, straightening & tying the grills and placing in position incl. cost of binding wire 18 to 20 gauge |
| 135 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 136 | 16mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 137 | Supply and Installation of TATA Blue Scope Colorbond, Profile specification: 31 mm depth and 200mm pitch, covered width of 1000mm and a overall width of 1060mm and Technical Specification :- Special polyester color coating of 20 micron (DFT) on exposed surface and 5 micron (DFT) of polyester primer on both surface on CRCA Steel of minimum yield strength of 550 Mpa with hot dip coating of 150gm mass of alloy of 55% Aluminum, 43.5% Zinc, and 1.5% Silicon, (AZ150) Conforming to ASTMA 792M-02/AS1397, Crimping of Sheet:- As per bending radius and Sheet Fixation Work:- Using Self Drill Screw of HILTI make:- Smd03K 5.5 * 63 & V-16 Washer with Accessory:- Gutter, Flashing, Fascia, Corner, etc with support metal Structure made with Steel trusses and purlins as per approved design made out of different size of angles with cost, conveyance of materials etc complete. (As per Market Rate Approxmately) |
| 138 | Finishing walls with water proofing cement paint of approved shade on new work (2 coats) to give an even shade including cost of paint & labour etc. complete. |
| 139 | Vermi Compost Production and Organic Manure Shed Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 140 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 141 | P.C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 142 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete a) F & P |
| 143 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 144 | 2.5cm thick AS Flooring with C.C.(1:2:4) incl. punning using 12mm size CBHG chipswith cost, carriage, royalty of materials etc. complete |
| 145 | Providing & Fixing of M.S Angle Frames in Vertical and Horizontal supports as per approved design made out of different size of angles with cost, conveyance of materials etc complete. |
| 146 | Supply and Installation of TATA Blue Scope Colorbond, Profile specification: 31 mm depth and 200mm pitch, covered width of 1000mm and a overall width of 1060mm and Technical Specification :- Special polyester color coating of 20 micron (DFT) on exposed surface and 5 micron (DFT) of polyester primer on both surface on CRCA Steel of minimum yield strength of 550 Mpa with hot dip coating of 150gm mass of alloy of 55% Aluminum, 43.5% Zinc, and 1.5% Silicon, (AZ150) Conforming to ASTMA 792M-02/AS1397, Crimping of Sheet:- As per bending radius and Sheet Fixation Work:- Using Self Drill Screw of HILTI make:- Smd03K 5.5 * 63 & V-16 Washer with Accessory:- Gutter, Flashing, Fascia, Corner, etc with support metal Structure made with Steel trusses and purlins as per approved design made out of different size of angles with cost, conveyance of materials etc complete. (As per Market Rate Approxmately) |
| 147 | Panchagavya Products Counter Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 148 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 149 | P.C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 150 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete a) F & P |
| 151 | B) Super Structure |
| 152 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Plinth Beam |
| 153 | b) Lintel |
| 154 | Labour for M.S reinforcement for R.C.C. Work incl. cutting, bending, binding, straightening & tying the grills and placing in position incl. cost of binding wire 18 to 20 gauge |
| 155 | Supplying & Fixing of M.S. doors shutter made out of angle frames & iron sheets with cost, conveyance of materials etc. complete. |
| 156 | Supplying & Fixing of M.S. grills and grill gate made out of angle frames with cost, conveyance of materials etc. complete. |
| 157 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 158 | 16mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 159 | 2.5cm thick AS Flooring with C.C.(1:2:4) incl. punning using 12mm size CBHG chipswith cost, carriage, royalty of materials etc. complete |
| 160 | Supply and Installation of TATA Blue Scope Colorbond, Profile specification: 31 mm depth and 200mm pitch, covered width of 1000mm and a overall width of 1060mm and Technical Specification :- Special polyester color coating of 20 micron (DFT) on exposed surface and 5 micron (DFT) of polyester primer on both surface on CRCA Steel of minimum yield strength of 550 Mpa with hot dip coating of 150gm mass of alloy of 55% Aluminum, 43.5% Zinc, and 1.5% Silicon, (AZ150) Conforming to ASTMA 792M-02/AS1397, Crimping of Sheet:- As per bending radius and Sheet Fixation Work:- Using Self Drill Screw of HILTI make:- Smd03K 5.5 * 63 & V-16 Washer with Accessory:- Gutter, Flashing, Fascia, Corner, etc with support metal Structure made with Steel trusses and purlins as per approved design made out of different size of angles with cost, conveyance of materials etc complete. (As per Market Rate Approxmately) |
| 161 | Painting two coats over a coat of primer with any approved paint over new iron work with cost, conveyance of materials etc. complete. |
| 162 | Finishing walls with water proofing cement paint of approved shade on new work (2 coats) to give an even shade including cost of paint & labour etc. complete. |
| 163 | Dung Pit and Dung Loading Deck Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 164 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 165 | P.C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 166 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete |
| 167 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 168 | 16mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 169 | Watchman Room (RCC Roofed Building) Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 170 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 171 | P.C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 172 | 2.5cm thick Damp Proof Concrete with C.C.(1:2:4) using 12mm size CBHG chips including cost, carriage, royalty of materials etc. complete |
| 173 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete a) F & P |
| 174 | B) Super Structure |
| 175 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Lintel |
| 176 | b) Roof Slab |
| 177 | Labour for M.S reinforcement for R.C.C. Work incl. cutting, bending, binding, straightening & tying the grills and placing in position incl. cost of binding wire 18 to 20 gauge |
| 178 | Supplying & Fixing of M.S. doors shutter made out of angle frames & iron sheets with cost, conveyance of materials etc. complete. |
| 179 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 180 | 16mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 181 | 2.5cm thick AS Flooring with C.C.(1:2:4) incl. punning using 12mm size CBHG chipswith cost, carriage, royalty of materials etc. complete |
| 182 | 12mm thick cement plaster in CM(1:4) over brick work finished smooth including cement punning with cost, carriage, roylty of materials etc. complete. |
| 183 | Painting two coats over a coat of priming with any approved paint over new iron work with cost, conveyance of materials etc. complete. |
| 184 | Distempering 2 coats to walls with distemper of approved shade on new work to give an even shade including cost of labour & distemper etc. complete. |
| 185 | Finishing walls with water proofing cement paint of approved shade on new work (2 coats) to give an even shade including cost of paint & labour etc. complete. |
| 186 | Weigh Bridge Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 187 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 188 | P.C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 189 | C.C.(1:2:4) with 12mm CBHG Chips including cost,carriage and royalty of materials etc complete |
| 190 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in Foundation & Plinth with cost carriage and royalty of materials etc. complete a) F & P |
| 191 | B) Super Structure |
| 192 | 6mm thick cement plaster in CM (1:4) over PCC Work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 193 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 194 | 16mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 195 | Supply and Installation of TATA Blue Scope Colorbond, Profile specification: 31 mm depth and 200mm pitch, covered width of 1000mm and a overall width of 1060mm and Technical Specification :- Special polyester color coating of 20 micron (DFT) on exposed surface and 5 micron (DFT) of polyester primer on both surface on CRCA Steel of minimum yield strength of 550 Mpa with hot dip coating of 150gm mass of alloy of 55% Aluminum, 43.5% Zinc, and 1.5% Silicon, (AZ150) Conforming to ASTMA 792M-02/AS1397, Crimping of Sheet:- As per bending radius and Sheet Fixation Work:- Using Self Drill Screw of HILTI make:- Smd03K 5.5 * 63 & V-16 Washer with Accessory:- Gutter, Flashing, Fascia, Corner, etc with support metal Structure made with Steel trusses and purlins as per approved design made out of different size of angles with cost, conveyance of materials etc complete. (As per Market Rate Approxmately) |
| 196 | Finishing walls with water proofing cement paint of approved shade on new work (2 coats) to give an even shade including cost of paint & labour etc. complete. |
| 197 | Construction of Drain Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 198 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 199 | P.C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 200 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Roof Slab |
| 201 | Labour for M.S reinforcement for R.C.C. Work incl. cutting, bending, binding, straightening & tying the grills and placing in position incl. cost of binding wire 18 to 20 gauge |
| 202 | 12mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 203 | 2.5cm thick AS Flooring with C.C.(1:2:4) incl. punning using 12mm size CBHG chipswith cost, carriage, royalty of materials etc. complete |
| 204 | Construction of Road (6 Mtr. Wide and 100 Mtr. Long) Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 205 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete. |
| 206 | C.C.(1:4:8) with 40mm size CBHG metal in F & P including cost,carriage of materials etc complete |
| 207 | C.C.(1:2:4) with 12mm CBHG Chips for C.C. Work including hoisting & laying including cost,carriage and royalty of materials |
| 208 | Septic Tank & Soak Pit Earthwork in excavation of foundation in hard soil within 50mtr initial lead, 1.5m initial lift including dressing & levelling the bed as per as per direction of the Engineer-in- Charge |
| 209 | Fiilling in foundation & plinth with sand, incl. watering & ramming with cost, conveyance, royalty of materials etc complete as per direction of Engr-in-charge. |
| 210 | P.C.C.(1:4:8) with 40mm CBHG metal including cost, carriage and royalty of materials. |
| 211 | Brickwork with Flyash bricks (Size 25*12*8cm) having crushing strength not less than 75 kg/ cm2 in CM(1:6) in following works with cost, conveyance, royalty of materials etc. complete a) F & P |
| 212 | R.C.C. work of M-20 grade with 20mm and down grade CBHG chips including hoisting & laying with cost, carriage and royalty of materials including centering & shuttering a) Roof Slab |
| 213 | b) Concrete wall |
| 214 | Supplying, fitting & placing uncoated HYSD bar reinforcement complete as per drawing and techinical specification with cost, conveyance of rod & binding, wire etc complete. |
| 215 | 12mm thick cement plaster in CM (1:4) over brick Work finished smooth including cement punning with cost, carriage, roylty of materials etc. complete. |
| 216 | 16mm thick cement plaster in CM(1:6) over brick work finished smooth including cost, carriage, roylty of materials etc. complete. |
| 217 | 2.5cm thick AS Flooring with C.C.(1:2:4) incl. punning using 12mm size CBHG chipswith cost, carriage, royalty of materials etc. complete |
| 218 | INTERNAL WATER SUPPLY & SANITATION \"STAFF QUARTER\" Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge Ground Floor 50mm dia |
| 219 | 40mm dia |
| 220 | 32mm dia |
| 221 | 20mm dia |
| 222 | Supplying all materials, Labour, T & P & fitting and fixing of following different water supply fitting as per ASTMD-2846 with supply of all necessary joint materials etc all complete as per direction of engineer-in-charge 50mm dia UPVC ball valve |
| 223 | 32mm dia UPVC ball valve |
| 224 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete 15mm to 32mm dia pipe |
| 225 | Providing and Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 32004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification Porcelain 20\" I.W.C (Orissa Pan) |
| 226 | Providing and Fixing in cement mortar (1:3) a pair of foot rest for I.W.C Pan |
| 227 | Providing and Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification. |
| 228 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 229 | Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification PORCELAIN E.W.C WITH S-TRAP (POPULAR) COLOUR |
| 230 | Fixing PVC Standard seat cover (Colour) for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification |
| 231 | Providing and fixing P.V.C. 10 litre capacity (low level ) (Colour) ( with fittings, accessories and flush pipe) with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 232 | Providing and Fixing wash basins with hole for pillar taps confirming to IS 2556 Part 4-2004 with cast iron or M.S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification Below counter Wash Basin |
| 233 | Providing and Fixing PVC waste pipe with fittings of following nominal diameter for wash basin or sink including brass check nut complete as per specification. |
| 234 | Providing and Fixing Chromium Plated brass waste coupling of the following nominal diameter for wash basin and sink as per specification |
| 235 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm |
| 236 | Supplying all materials, labour, taxes,T&P for fitting & fixing of different water supply CP, Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,including cost of all labours,materials,conveyance,loading and unloading,all taxs and royalies, sundries and T&P etc all compete as per direction of the Engineer-in-charge. Pillar Cock |
| 237 | 2 in 1 Bib cock |
| 238 | Angular stop cock |
| 239 | CP Health Faucet with 1.01 RM PVC tube |
| 240 | Soap Dish |
| 241 | Bathroom mirror 600x600 mm |
| 242 | Toilet paper Holder |
| 243 | Sink mixer with regular swinging spout (wall mounted miodel) with connection legs & wall flanges |
| 244 | Exposed Part of Flush Cock Compatible With Concealed Body of Flush Cock (parryware) |
| 245 | CP Flange small |
| 246 | 110mm dia pvc nahani trap without jally |
| 247 | CP extension piece |
| 248 | CP Grating |
| 249 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 250 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expension,(i) Single socketed pipes. 110MM OD P.V.C SWR S/S PIPE(ISI TYPEA) |
| 251 | Supply all material, labour ,T&P ,fitting and fixing UPVC SWR Type B pipes & fitting of approved make conforming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per stanard specification, both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleant,pipe clamps as per requirement including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips, including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC 75mm dia OD PVC SWR S/S PIPE (ISI TYPE-B) |
| 252 | 110mm dia OD PVC SWR S/S PIPE (ISI TYPE-B) |
| 253 | 110mm p.v.c s/j with door |
| 254 | 110mm p.v.c swr plain bend 87.5 |
| 255 | 110mm pipe clip |
| 256 | 110mm dia p.v.c vent cowl |
| 257 | 110mm dia p.v.c swr coupler |
| 258 | Providing and fixing pvc gully trap compete with grating brick masonry chamber with water tight SFRC cover with frame of 300*300 mm size(inside)the weight of cover to be notless than 4.50kg and frame to be not less than 2.70kg as per standard design:100*100 mm size P type .including cost of all labours,material,conveyance,loading and unloading,all taxes and royalties,sundries and T&P etc all complete as per direction of the Engineer-in-change. With flyash bricks of minimum compressive strength 75 kg/sqcm (Size 300 x 300 x 300 mm) |
| 259 | Constructing brick masonary chamber for underground SFRC inspection chamber and bends with brick in cement mortar 1:4 (1 cement :4 coarse sand )SFRC cover with frame 455*610mm internal dimensions ,total weight of cover with frame be not less than 38kg (weight of cover 23kg and weight of frame 15 kg), R.C.C TOP SLAB WITH 1:2:4mix(1 cement:2 coarse sad:4 graded stone aggregate 20mm nominal size ),foundation concrete 1:5:10(1 cement :5 fine sand :10 graded stone aggregate 40mm nominal size)insideplastering 12mm thick with cement mortar 1:3(i cement:3 coarse sand),finished smooth with a floating coat of neat cement on walls and bed concrete etc.compete as per standard design Including all cost of labour,material,T&P etc.all compete as per the engineer-in-charge. Inside dimensions 600*850mmand 45cm deep for pipe line with three or more inlets. |
| 260 | Supplying all materials,labour,T&P and fixing PVC water storage tanks of as required capacity confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extre sockets and jam nuts,fixing ball valve etc,including conveyance of all materials to work site etc all complete as per specification and direction of Engineer-in-charge.(Sintex/Equivalent) 2000 Ltr Capacity-1 Nos |
| 261 | INTERNAL WATER SUPPLY & SANITATION \"MILK PROCESSING UNIT\" Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge Ground Floor 50mm dia |
| 262 | 32mm dia |
| 263 | 20mm dia |
| 264 | Supplying all materials, Labour, T & P & fitting and fixing of following different water supply fitting as per ASTMD-2846 with supply of all necessary joint materials etc all complete as per direction of engineer-in-charge 50mm dia UPVC ball valve |
| 265 | 32mm dia UPVC ball valve |
| 266 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete 15mm to 32mm dia pipe |
| 267 | Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification PORCELAIN E.W.C WITH S-TRAP (POPULAR) COLOUR |
| 268 | Fixing PVC Standard seat cover (Colour) for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification |
| 269 | Providing and fixing P.V.C. 10 litre capacity (low level ) (Colour) ( with fittings, accessories and flush pipe) with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 270 | Providing and Fixing wash basins with hole for pillar taps confirming to IS 2556 Part 4-2004 with cast iron or M.S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification Below counter Wash Basin |
| 271 | Providing and Fixing PVC waste pipe with fittings of following nominal diameter for wash basin or sink including brass check nut complete as per specification. |
| 272 | Providing and Fixing Chromium Plated brass waste coupling of the following nominal diameter for wash basin and sink as per specification |
| 273 | Supplying all materials, labour, taxes,T&P for fitting & fixing of different water supply CP, Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,including cost of all labours,materials,conveyance,loading and unloading,all taxs and royalies, sundries and T&P etc all compete as per direction of the Engineer-in-charge. Pillar Cock |
| 274 | 2 in 1 Bib cock |
| 275 | Angular stop cock |
| 276 | CP Health Faucet with 1.01 RM PVC tube |
| 277 | Soap Dish |
| 278 | Bathroom mirror 600x600 mm |
| 279 | Toilet paper Holder |
| 280 | Exposed Part of Flush Cock Compatible With Concealed Body of Flush Cock (parryware) |
| 281 | CP Flange small |
| 282 | 110mm dia pvc nahani trap without jally |
| 283 | CP extension piece |
| 284 | CP Grating |
| 285 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 286 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expension,(i) Single socketed pipes. 110MM OD P.V.C SWR S/S PIPE(ISI TYPEA) |
| 287 | Supply all material, labour ,T&P ,fitting and fixing UPVC SWR Type B pipes & fitting of approved make conforming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per stanard specification, both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleant,pipe clamps as per requirement including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips, including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC 110mm dia OD PVC SWR S/S PIPE (ISI TYPE-B) |
| 288 | 110mm p.v.c s/j with door |
| 289 | 110mm p.v.c swr plain bend 87.5 |
| 290 | 110mm pipe clip |
| 291 | 110mm dia p.v.c vent cowl |
| 292 | 110mm dia p.v.c swr coupler |
| 293 | Providing and fixing pvc gully trap compete with grating brick masonry chamber with water tight SFRC cover with frame of 300*300 mm size(inside)the weight of cover to be notless than 4.50kg and frame to be not less than 2.70kg as per standard design:100*100 mm size P type .including cost of all labours,material,conveyance,loading and unloading,all taxes and royalties,sundries and T&P etc all complete as per direction of the Engineer-in-change. With flyash bricks of minimum compressive strength 75 kg/sqcm (Size 300 x 300 x 300 mm) |
| 294 | Constructing brick masonary chamber for underground SFRC inspection chamber and bends with brick in cement mortar 1:4 (1 cement :4 coarse sand )SFRC cover with frame 455*610mm internal dimensions ,total weight of cover with frame be not less than 38kg (weight of cover 23kg and weight of frame 15 kg), R.C.C TOP SLAB WITH 1:2:4mix(1 cement:2 coarse sad:4 graded stone aggregate 20mm nominal size ),foundation concrete 1:5:10(1 cement :5 fine sand :10 graded stone aggregate 40mm nominal size)insideplastering 12mm thick with cement mortar 1:3(i cement:3 coarse sand),finished smooth with a floating coat of neat cement on walls and bed concrete etc.compete as per standard design Including all cost of labour,material,T&P etc.all compete as per the engineer-in-charge. Inside dimensions 600*850mmand 45cm deep for pipe line with three or more inlets. |
| 295 | Supplying all materials,labour,T&P and fixing PVC water storage tanks of as required capacity confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extre sockets and jam nuts,fixing ball valve etc,including conveyance of all materials to work site etc all complete as per specification and direction of Engineer-in-charge.(Sintex/Equivalent) 1000 Ltr Capacity-1 Nos |
| 296 | INTERNAL WATER SUPPLY & SANITATION \"VETERINARY OFFICE\" Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge Ground Floor 50mm dia |
| 297 | 32mm dia |
| 298 | 20mm dia |
| 299 | Supplying all materials, Labour, T & P & fitting and fixing of following different water supply fitting as per ASTMD-2846 with supply of all necessary joint materials etc all complete as per direction of engineer-in-charge 50mm dia UPVC ball valve |
| 300 | 32mm dia UPVC ball valve |
| 301 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete 15mm to 32mm dia pipe |
| 302 | Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification PORCELAIN E.W.C WITH S-TRAP (POPULAR) COLOUR |
| 303 | Fixing PVC Standard seat cover (Colour) for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification |
| 304 | Providing and fixing P.V.C. 10 litre capacity (low level ) (Colour) ( with fittings, accessories and flush pipe) with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 305 | Providing and Fixing wash basins with hole for pillar taps confirming to IS 2556 Part 4-2004 with cast iron or M.S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification Below counter Wash Basin |
| 306 | Providing and Fixing PVC waste pipe with fittings of following nominal diameter for wash basin or sink including brass check nut complete as per specification. |
| 307 | Providing and Fixing Chromium Plated brass waste coupling of the following nominal diameter for wash basin and sink as per specification |
| 308 | Providing and Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification. |
| 309 | Providing and Fixing PVC waste pipe of following nominal diameter for urinal including brass check nut complete as per specification |
| 310 | Providing and fixing of urinal domed Waste coupling |
| 311 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade |
| 312 | Supplying all materials, labour, taxes,T&P for fitting & fixing of different water supply CP, Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,including cost of all labours,materials,conveyance,loading and unloading,all taxs and royalies, sundries and T&P etc all compete as per direction of the Engineer-in-charge. Pillar Cock |
| 313 | 2 in 1 Bib cock |
| 314 | Angular stop cock |
| 315 | CP Health Faucet with 1.01 RM PVC tube |
| 316 | Soap Dish |
| 317 | Bathroom mirror 600x600 mm |
| 318 | Toilet paper Holder |
| 319 | Exposed Part of Flush Cock Compatible With Concealed Body of Flush Cock (parryware) |
| 320 | CP Flange small |
| 321 | 110mm dia pvc nahani trap without jally |
| 322 | CP extension piece |
| 323 | CP Grating |
| 324 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 325 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expension,(i) Single socketed pipes. 110MM OD P.V.C SWR S/S PIPE(ISI TYPEA) |
| 326 | Supply all material, labour ,T&P ,fitting and fixing UPVC SWR Type B pipes & fitting of approved make conforming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per stanard specification, both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleant,pipe clamps as per requirement including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips, including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC 110mm dia OD PVC SWR S/S PIPE (ISI TYPE-B) |
| 327 | 110mm p.v.c s/j with door |
| 328 | 110mm p.v.c swr plain bend 87.5 |
| 329 | 110mm pipe clip |
| 330 | 110mm dia p.v.c vent cowl |
| 331 | 110mm dia p.v.c swr coupler |
| 332 | Providing and fixing pvc gully trap compete with grating brick masonry chamber with water tight SFRC cover with frame of 300*300 mm size(inside)the weight of cover to be notless than 4.50kg and frame to be not less than 2.70kg as per standard design:100*100 mm size P type .including cost of all labours,material,conveyance,loading and unloading,all taxes and royalties,sundries and T&P etc all complete as per direction of the Engineer-in-change. With flyash bricks of minimum compressive strength 75 kg/sqcm (Size 300 x 300 x 300 mm) |
| 333 | Constructing brick masonary chamber for underground SFRC inspection chamber and bends with brick in cement mortar 1:4 (1 cement :4 coarse sand )SFRC cover with frame 455*610mm internal dimensions ,total weight of cover with frame be not less than 38kg (weight of cover 23kg and weight of frame 15 kg), R.C.C TOP SLAB WITH 1:2:4mix(1 cement:2 coarse sad:4 graded stone aggregate 20mm nominal size ),foundation concrete 1:5:10(1 cement :5 fine sand :10 graded stone aggregate 40mm nominal size)insideplastering 12mm thick with cement mortar 1:3(i cement:3 coarse sand),finished smooth with a floating coat of neat cement on walls and bed concrete etc.compete as per standard design Including all cost of labour,material,T&P etc.all compete as per the engineer-in-charge. Inside dimensions 600*850mmand 45cm deep for pipe line with three or more inlets. |
| 334 | Supplying all materials,labour,T&P and fixing PVC water storage tanks of as required capacity confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extre sockets and jam nuts,fixing ball valve etc,including conveyance of all materials to work site etc all complete as per specification and direction of Engineer-in-charge.(Sintex/Equivalent) 500 Ltr Capacity-1 Nos |
| 335 | INTERNAL WATER SUPPLY & SANITATION \"ADMIN OFFICE\" Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge Ground Floor 50mm dia |
| 336 | 32mm dia |
| 337 | 20mm dia |
| 338 | Supplying all materials, Labour, T & P & fitting and fixing of following different water supply fitting as per ASTMD-2846 with supply of all necessary joint materials etc all complete as per direction of engineer-in-charge 50mm dia UPVC ball valve |
| 339 | 32mm dia UPVC ball valve |
| 340 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete 15mm to 32mm dia pipe |
| 341 | Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification PORCELAIN E.W.C WITH S-TRAP (POPULAR) COLOUR |
| 342 | Fixing PVC Standard seat cover (Colour) for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification |
| 343 | Providing and fixing P.V.C. 10 litre capacity (low level ) (Colour) ( with fittings, accessories and flush pipe) with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 344 | Providing and Fixing wash basins with hole for pillar taps confirming to IS 2556 Part 4-2004 with cast iron or M.S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification Below counter Wash Basin |
| 345 | Providing and Fixing PVC waste pipe with fittings of following nominal diameter for wash basin or sink including brass check nut complete as per specification. |
| 346 | Providing and Fixing Chromium Plated brass waste coupling of the following nominal diameter for wash basin and sink as per specification |
| 347 | Providing and Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification. |
| 348 | Providing and Fixing PVC waste pipe of following nominal diameter for urinal including brass check nut complete as per specification |
| 349 | Providing and fixing of urinal domed Waste coupling |
| 350 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade |
| 351 | Supplying all materials, labour, taxes,T&P for fitting & fixing of different water supply CP, Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,including cost of all labours,materials,conveyance,loading and unloading,all taxs and royalies, sundries and T&P etc all compete as per direction of the Engineer-in-charge. Pillar Cock |
| 352 | 2 in 1 Bib cock |
| 353 | Angular stop cock |
| 354 | CP Health Faucet with 1.01 RM PVC tube |
| 355 | Soap Dish |
| 356 | Bathroom mirror 600x600 mm |
| 357 | Toilet paper Holder |
| 358 | Exposed Part of Flush Cock Compatible With Concealed Body of Flush Cock (parryware) |
| 359 | CP Flange small |
| 360 | 110mm dia pvc nahani trap without jally |
| 361 | CP extension piece |
| 362 | CP Grating |
| 363 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 364 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expension,(i) Single socketed pipes. 110MM OD P.V.C SWR S/S PIPE(ISI TYPEA) |
| 365 | Supply all material, labour ,T&P ,fitting and fixing UPVC SWR Type B pipes & fitting of approved make conforming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per stanard specification, both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleant,pipe clamps as per requirement including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips, including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC 110mm dia OD PVC SWR S/S PIPE (ISI TYPE-B) |
| 366 | 110mm p.v.c s/j with door |
| 367 | 110mm p.v.c swr plain bend 87.5 |
| 368 | 110mm pipe clip |
| 369 | 110mm dia p.v.c vent cowl |
| 370 | 110mm dia p.v.c swr coupler |
| 371 | Providing and fixing pvc gully trap compete with grating brick masonry chamber with water tight SFRC cover with frame of 300*300 mm size(inside)the weight of cover to be notless than 4.50kg and frame to be not less than 2.70kg as per standard design:100*100 mm size P type .including cost of all labours,material,conveyance,loading and unloading,all taxes and royalties,sundries and T&P etc all complete as per direction of the Engineer-in-change. With flyash bricks of minimum compressive strength 75 kg/sqcm (Size 300 x 300 x 300 mm) |
| 372 | Constructing brick masonary chamber for underground SFRC inspection chamber and bends with brick in cement mortar 1:4 (1 cement :4 coarse sand )SFRC cover with frame 455*610mm internal dimensions ,total weight of cover with frame be not less than 38kg (weight of cover 23kg and weight of frame 15 kg), R.C.C TOP SLAB WITH 1:2:4mix(1 cement:2 coarse sad:4 graded stone aggregate 20mm nominal size ),foundation concrete 1:5:10(1 cement :5 fine sand :10 graded stone aggregate 40mm nominal size)insideplastering 12mm thick with cement mortar 1:3(i cement:3 coarse sand),finished smooth with a floating coat of neat cement on walls and bed concrete etc.compete as per standard design Including all cost of labour,material,T&P etc.all compete as per the engineer-in-charge. Inside dimensions 600*850mmand 45cm deep for pipe line with three or more inlets. |
| 373 | Supplying all materials,labour,T&P and fixing PVC water storage tanks of as required capacity confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extre sockets and jam nuts,fixing ball valve etc,including conveyance of all materials to work site etc all complete as per specification and direction of Engineer-in-charge.(Sintex/Equivalent) 500 Ltr Capacity-1 Nos |
| 374 | EXTERNAL WATER SUPPLY SYSTEM Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m including cost of all labours, materials, conveyance, loading and unloading, all taxes , sundries and T&P etc all complete as per direction of the Engineer -in-charge. All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 375 | Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre). |
| 376 | Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient .including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 377 | Providing and laying Chlorinated Polyvinyl Chloride (CPVC) pipes & specials in trenches conforming to IS:15778 including all CPVC plain & brass threaded fittings like bend, tees, reducer etc, jointing by solvent cement with non heating process. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 100mm dia CPVC SCH-80 Pipe |
| 378 | 32 mm dia CPVC SCH-80 Pipe |
| 379 | Providing & fitting fixing cast iron sluice valve with double flange ends for water work purpose conforming to IS -2685-1974 for the following rating & nomimal diameter as per specification including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge. 100 mm dia C.I D/F sluice valve with hand wheel (PN-10) |
| 380 | Providing & fitting fixing cast iron non return valve with double flange ends for water works purpose conforming to I.S: 2685-1971 for following rating & nominal diameter as per specification including cost of all labours, materials, conveyance, loading and unloading, all taxes, sundries and T&P etc all complete as per direction of the Engineer -in-charge. 100 mm dia C.I D/F non return valve |
| 381 | Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge. 100 mm dia |
| 382 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with SFRC surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 383 | Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350 x 350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 384 | Supplying of all Labour,material and equipment for core drilling work of following size and specification as per the direction of Engineer-in-work. 2. Diamond Core Drilling 152 dia and depth of 150 mm on slab |
| 385 | PUMPS Supplying and ercecting of submerssible pump of following capacity as per the direction of Engineer in charge. 6 LPS 35 Mtr Head to WTP Pump 5HP X2 Nos= 10 HP (Approx) |
| 386 | 7 LPS 35 Mtr Head Treated water tank to flushing Terrace Tank 7.5HP X2 Nos= 15 HP (Approx) |
| 387 | Supplying and ercecting of ATS Control panel 6 LPS 35 Mtr Head to WTP Pump 5HP X2 Nos= 10 HP (Approx) |
| 388 | 7 LPS 35 Mtr Head Treated water tank to flushing Terrace Tank 7.5HP X2 Nos= 15 HP (Approx) |
| 389 | BOREWELL(200x150 mm size )- 1Nos Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). |
| 390 | Supplying, assembling, lowering and fixing in vertical position, unplasticized PVC casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories. materials, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge. 150 mm nominal inner dia Pipes(SCH-80) |
| 391 | Cleaning and developing the bore well using their own compressor continuously worked till clear and adequate discharge is obtained from the bore well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. |
| 392 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell all as per requirement and direction of Engineer-in-charge. 150mm dia |
| 393 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of borewell as per IS: 2800 (part I), including necessary bolts & nuts of required size all complete for borewell all as per requirement and direction of Engineer-in-charge. 150 mm clamp |
| 394 | Supplying all materials, labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/ PVC/ MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole including cost of cement etc all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing. |
| 395 | Supply, installation, testing & commissioning of following capacity horizontal submersible pump set to install inside the production well and reservoir including all suction, delivery overflow pipe line valve arrangement & all electrical instllation like pannel board , stater, 3 core flat submersible cable etc all complete as per specification & direction of E.I.C 3H.P vertical submersible pumpset , Head discharge of 65mtr and 3 lps with automatic star delta starter panel |
| 396 | 4mm2 ,3 core flat copper cable for vertical submersible pump |
| 397 | Nylone rope or plastic coated steel rope |
| 398 | Cost of PVC Fittings (Bottom Cone, Top Cap, R/Socket, Nipple) |
| 399 | EXTERNAL SEWERAGE SYSTEM Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. including cost of all labours, materials, conveyance, loading and unloading, all taxes , sundries and T&P etc all complete as per direction of the Engineer -in-charge. All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 400 | From 1.5 Mtr to 3.0 Mtr Depth |
| 401 | Supplying and filling with sand in trenches, including watering, ramming, consolidating and dressing complete etc.including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. |
| 402 | Supplying, laying, jointing,fitting and fixing, testing and commission-ing uPVC foam core structured pipes confirming to IS certification with SN4 or SN8 Solvent Cement joints with or without rubber ring for Soil Pipes and coupler complete for external sewerage system, including supply of bobbins, nails, screws, wooden cleats, pipe clamps as per requirement. including cost of all labours, materials, conveyance, loading and unloading, all taxes and sundries and T&P etc all complete as per direction of the Engineer -in-charge. 160 mm dia UPVC S/S SN-8 Foam Core Pipe |
| 403 | Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of surrounding or encasing uPVC/RCC pipes of the following diameter including concrete for bedding and curing complete as per specification & direction of EIC. 200 mm dia with A-1 type standard bedding |
| 404 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : all complete as per the direction of Engineer in charge. Inside size 120x90 cm and 90 cm deep including SFRC cover with frame 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) With Sewer bricks conforming to IS : 4885 |
| 405 | Extra additional depth for manholes Size 120x90 cm With Sewer bricks conforming to IS : 4885 |
| 406 | Design, Supply, installation, testing and commissioning of following capacity compact type STP (Sewege treatment plant) including equalisation tank, dosing tank, treated sewage tank multi grade filter, activated carbon filter and treated water tank. Etc all complete as per IS Specification including all cost of labour, material, conveyance T&P etc, as per direction of Engineer-in-Charge |
| 407 | INTERNAL ELECTICAL WORK WITH FITTINGS.-STAFF QUARTER Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required including the cost of labor & material T & P as required as EIC. First Point Group A |
| 408 | Group B |
| 409 | Group C |
| 410 | Looping Point .(Looping Point) (Controled by same switch-with Gr.A wire quantity Only) |
| 411 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping & UPS lighting,BDB to basement & stilt Light Points. |
| 412 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points |
| 413 | 2 X 4.0 sq. mm + 1 X 2.5 sq. mm earth wire for AC & Geyser Point.& EL+C DB wiring |
| 414 | 4 X 6 sq. mm + 2 X 4 sq. mm earth wire for P.BDB |
| 415 | Supplying and drawing following pair 0.5 sq mm FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 Pair |
| 416 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required including the cost of labor & material T & P as required as EIC. |
| 417 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required including the cost of labor & material T & P as required as EIC. 20 mm |
| 418 | 25 mm |
| 419 | Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit ,also including painting etc as required including the cost of labor & material T & P as required as EIC. 75 mm X 75 mm X 60 mm deep |
| 420 | 100 mm X 100 mm X 60 mm deep |
| 421 | 150 mm X 75 mm X 60 mm deep |
| 422 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 423 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3nos 3 pin 5/6 amps modular socket outlet with 2nos 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 424 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 425 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 426 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular Socket , connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 427 | Supplying and fixing of Telephone socket out let with suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing , connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 428 | Supplying and fixing of TV antenna socket out let with suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing , connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 429 | Installation, testing and commissioning of wall bracket /ceiling fittings /Hanging/Linear Hanging/LED down light/Occupancy sensor of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 430 | Supplying and fixing brass decorative angle / Batten Holder fitting including connection etc. as requiredincluding the cost of labor & material T & P as required as EIC. |
| 431 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 432 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required including the cost of labor & material T & P as required as EIC. |
| 433 | Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required including the cost of labor & material T & P as required as EIC. |
| 434 | Installation of exhaust fan with shutters/louvers in the existing opening, including making good the damage, connection, testing, commissioning etc. as required including the cost of labor & material T & P as required as EIC. Upto 450 mm sweep |
| 435 | Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required including the cost of labor & material T & P as required as EIC. |
| 436 | Supplying and fixing of support arrangement for fixing of cable tray, light fittings ,Panel Board etc with MS angles / flats / rods /anchor flashner/extra rod for fan & Lights including jointing the steel sections of the support arrangement with nuts & bolts / welding / Febicating complete as required including the cost of labor & material T & P as required as EIC. |
| 437 | SDB\"S, MCB, ISOLATOR,CABLE,PANELS-: Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door |
| 438 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) Single pole |
| 439 | Supplying and fixing following rating, four pole, (three phase andneutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of labor & material T & P as required as EIC. 40/63amps |
| 440 | Supplying the following Size ISI mark Aluminum conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required including the cost of material T & P as required as EIC. a- 4 core 6 sq.mm |
| 441 | Laying and fixing of one number of following size of cable on wall surface as required, ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required 25 sq. mm and upto 120 sq. mm |
| 442 | Laying and fixing of one number .following size cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required upto 25 sq. mm |
| 443 | Supplying and making end termination with brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required. 4 core 6 sq.mm |
| 444 | Panels Supply, Installation, Testing, and Commissioning of 32 Amp TPN Main switches (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, nterconnections, earthing, etc. as required as per direction of Engineer in Charge |
| 445 | Earthing Earthing with G.I. earth pipe 4.5 metre long, 40 mm including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 446 | Supplying and laying 6 SWG G.I. wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required |
| 447 | FITTING & FIXTURE-: Supplying of of PVC Exhaust fan 250 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting Frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as per EIC of approved makeincluding the cost of material ,labor T & P as required as EIC..(Make-CG/HAVELLS/RR/HALONIX/USHA) |
| 448 | Supplying of 1200 mm sweep ceiling fan ,BEE 5star Rated, Brush Less direct current(BLDC)motor,class of Insulation:B , 3nos Blade,30cm long Rod,2nos canopies,shakel kit,safety rope,copper winding, Power factor not less than 0.9, service value (CMM/W) minimum 6.85 ,Air deliver minmum 215 CMM ,350 RPM (tolearance as per IS-2019).THD not less than 10% with Remote for speed control remaining all other accessories like safety pin, nut bolts,washer, temperture rise 75degree C. max,insulation resitance more than 2-Megaohm suitable for single phase 230v,50Hz AC supply ,earthing as per EIC of approved make including the cost of material ,labor T & P as required as EIC..(Make-CG/HAVELLS/RR/HALONIX/USHA) |
| 449 | Supply, Testing & commissioning of 1 no of 10 watt LED bulb(White) as per EIC of approved makeincluding the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 450 | Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 451 | Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 452 | Supply, Testing & commissioning of Surface or wall mounting 1 x 10W LED tube light fitting (5700K) including 1 no. of 10watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. .(Make-Wipro/Philips/Trilux/LT/Jaquar/Havells) |
| 453 | Supply, Installation,Testing & commissioning of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,with 35mm angled pole type fixing chanel for fixing on the parapet wall,clamp & nut bolt connecting wire all accessories (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 454 | INTERNAL ELECTICAL WORK WITH FITTINGS.-MILK PROCESSING UNIT WIRING-: Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required including the cost of labor & material T & P as required as EIC. FirstPoint Group A |
| 455 | Group B |
| 456 | Group C |
| 457 | Looping Point .(Looping Point) (Controled by same switch-with Gr.A wire quantity Only) |
| 458 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping & UPS lighting,BDB to basement & stilt Light Points. |
| 459 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points |
| 460 | 2 X 4.0 sq. mm + 1 X 2.5 sq. mm earth wire for AC & Geyser Point.& EL+C DB wiring |
| 461 | 4 X 6 sq. mm + 2 X 4 sq. mm earth wire for P.BDB |
| 462 | Supplying and drawing following pair 0.5 sq mm FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 Pair |
| 463 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required including the cost of labor & material T & P as required as EIC. |
| 464 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required including the cost of labor & material T & P as required as EIC. 20 mm |
| 465 | 25 mm |
| 466 | Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit ,also including painting etc as required including the cost of labor & material T & P as required as EIC. 75 mm X 75 mm X 60 mm deep |
| 467 | 100 mm X 100 mm X 60 mm deep |
| 468 | 150 mm X 75 mm X 60 mm deep |
| 469 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 470 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3nos 3 pin 5/6 amps modular socket outlet with 2nos 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 471 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 472 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 473 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular Socket , connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 474 | Supplying and fixing of Telephone socket out let with suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing , connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 475 | Supplying and fixing of TV antenna socket out let with suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing , connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 476 | Installation, testing and commissioning of wall bracket /ceiling fittings /Hanging/Linear Hanging/LED down light/Occupancy sensor of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 477 | Supplying and fixing brass decorative angle / Batten Holder fitting including connection etc. as requiredincluding the cost of labor & material T & P as required as EIC. |
| 478 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 479 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required including the cost of labor & material T & P as required as EIC. |
| 480 | Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required including the cost of labor & material T & P as required as EIC. |
| 481 | Installation of exhaust fan with shutters/louvers in the existing opening, including making good the damage, connection, testing, commissioning etc. as required including the cost of labor & material T & P as required as EIC. Upto 450 mm sweep |
| 482 | Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required including the cost of labor & material T & P as required as EIC. |
| 483 | Supplying and fixing of support arrangement for fixing of cable tray, light fittings ,Panel Board etc with MS angles / flats / rods /anchor flashner/extra rod for fan & Lights including jointing the steel sections of the support arrangement with nuts & bolts / welding / Febicating complete as required including the cost of labor & material T & P as required as EIC. |
| 484 | SDB\"S, MCB, ISOLATOR,CABLE,PANELS- Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door |
| 485 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) Single pole |
| 486 | Supplying and fixing following rating, four pole, (three phase andneutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of labor & material T & P as required as EIC. 40/63amps |
| 487 | Supplying the following Size ISI mark Aluminum conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required including the cost of material T & P as required as EIC. a- 4 core 6 sq.mm |
| 488 | Laying and fixing of one number of following size of cable on wall surface as required, ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required 25 sq. mm and upto 120 sq. mm |
| 489 | Laying and fixing of one number .following size cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required upto 25 sq. mm |
| 490 | Supplying and making end termination with brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required. 4 core 6 sq.mm |
| 491 | Panels Supply, Installation, Testing, and Commissioning of 32 Amp TPN Main switches (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, nterconnections, earthing, etc. as required as per direction of Engineer in Charge |
| 492 | Earthing Earthing with G.I. earth pipe 4.5 metre long, 40 mm including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 493 | Supplying and laying 6 SWG G.I. wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required |
| 494 | FITTING & FIXTURE-: Supplying of of PVC Exhaust fan 250 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting Frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as per EIC of approved makeincluding the cost of material ,labor T & P as required as EIC..(Make-CG/HAVELLS/RR/HALONIX/USHA) |
| 495 | Supplying of 1200 mm sweep ceiling fan ,BEE 5star Rated, Brush Less direct current(BLDC)motor,class of Insulation:B , 3nos Blade,30cm long Rod,2nos canopies,shakel kit,safety rope,copper winding, Power factor not less than 0.9, service value (CMM/W) minimum 6.85 ,Air deliver minmum 215 CMM ,350 RPM (tolearance as per IS-2019).THD not less than 10% with Remote for speed control remaining all other accessories like safety pin, nut bolts,washer, temperture rise 75degree C. max,insulation resitance more than 2-Megaohm suitable for single phase 230v,50Hz AC supply ,earthing as per EIC of approved make including the cost of material ,labor T & P as required as EIC..(Make-CG/HAVELLS/RR/HALONIX/USHA) |
| 496 | Supply, Testing & commissioning of 1 no of 10 watt LED bulb(White) as per EIC of approved makeincluding the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 497 | Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 498 | Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 499 | Supply, Testing & commissioning of wall mounting 1 x 10W LED wall mounted IP-65 bulk head / Outdoor wall light fitting including 10watt LED luminairs (5700K) as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (Make-Wipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 500 | Supply, Installation,Testing & commissioning of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,with 35mm angled pole type fixing chanel for fixing on the parapet wall,clamp & nut bolt connecting wire all accessories (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 501 | INTERNAL ELECTICAL WORK WITH FITTINGS.-COW SHED WIRING-: Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required including the cost of labor & material T & P as required as EIC. FirstPoint Group A |
| 502 | Group B |
| 503 | Group C |
| 504 | Looping Point .(Looping Point) (Controled by same switch-with Gr.A wire quantity Only) |
| 505 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping & UPS lighting,BDB to basement & stilt Light Points. |
| 506 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points |
| 507 | 2 X 4.0 sq. mm + 1 X 2.5 sq. mm earth wire for AC & Geyser Point.& EL+C DB wiring |
| 508 | Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit ,also including painting etc as required including the cost of labor & material T & P as required as EIC. 75 mm X 75 mm X 60 mm deep |
| 509 | 100 mm X 100 mm X 60 mm deep |
| 510 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 511 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 512 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required including the cost of labor & material T & P as required as EIC. |
| 513 | Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required including the cost of labor & material T & P as required as EIC. |
| 514 | Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required including the cost of labor & material T & P as required as EIC. |
| 515 | Supplying and fixing of support arrangement for fixing of cable tray, light fittings ,Panel Board etc with MS angles / flats / rods /anchor flashner/extra rod for fan & Lights including jointing the steel sections of the support arrangement with nuts & bolts / welding / Febicating complete as required including the cost of labor & material T & P as required as EIC. |
| 516 | SDB\"S, MCB, ISOLATOR,CABLE,PANELS- Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) 8 way (2 + 6), Double door |
| 517 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) Single pole |
| 518 | Single pole & Neutral |
| 519 | Supplying the following Size ISI mark Aluminum conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required including the cost of material T & P as required as EIC. a- 3 core 6 sq.mm |
| 520 | Laying and fixing of one number of following size of cable on wall surface as required, ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required 25 sq. mm and upto 120 sq. mm |
| 521 | Laying and fixing of one number .following size cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required upto 25 sq. mm |
| 522 | Supplying and making end termination with brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required. 3 core 6 sq.mm |
| 523 | Panels Supply, Installation, Testing, and Commissioning of 32 Amp TPN Main switches (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, nterconnections, earthing, etc. as required as per direction of Engineer in Charge |
| 524 | Earthing Earthing with G.I. earth pipe 4.5 metre long, 40 mm including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 525 | Supplying and laying 6 SWG G.I. wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required |
| 526 | FITTING & FIXTURE-: Supplying of 1200 mm sweep ceiling fan ,BEE 5star Rated, Brush Less direct current(BLDC)motor,class of Insulation:B , 3nos Blade,30cm long Rod,2nos canopies,shakel kit,safety rope,copper winding, Power factor not less than 0.9, service value (CMM/W) minimum 6.85 ,Air deliver minmum 215 CMM ,350 RPM (tolearance as per IS-2019).THD not less than 10% with Remote for speed control remaining all other accessories like safety pin, nut bolts,washer, temperture rise 75degree C. max,insulation resitance more than 2-Megaohm suitable for single phase 230v,50Hz AC supply ,earthing as per EIC of approved make including the cost of material ,labor T & P as required as EIC..(Make-CG/HAVELLS/RR/HALONIX/USHA) |
| 527 | Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 528 | Supply, Installation,Testing & commissioning of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,with 35mm angled pole type fixing chanel for fixing on the parapet wall,clamp & nut bolt connecting wire all accessories (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 529 | INTERNAL ELECTICAL WORK WITH FITTINGS.-VETERINARY SURGERY AND TREATMENT SHED WIRING-: Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required including the cost of labor & material T & P as required as EIC. FirstPoint Group A |
| 530 | Group B |
| 531 | Group C |
| 532 | Looping Point .(Looping Point) (Controled by same switch-with Gr.A wire quantity Only) |
| 533 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping & UPS lighting,BDB to basement & stilt Light Points. |
| 534 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points |
| 535 | 2 X 4.0 sq. mm + 1 X 2.5 sq. mm earth wire for AC & Geyser Point.& EL+C DB wiring |
| 536 | 2 X 6.0 sq. mm + 1 X 4 sq. mm earth wire for UPS wiring |
| 537 | Supplying and drawing following pair 0.5 sq mm FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 Pair |
| 538 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required including the cost of labor & material T & P as required as EIC. 20 mm |
| 539 | Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit ,also including painting etc as required including the cost of labor & material T & P as required as EIC. 75 mm X 75 mm X 60 mm deep |
| 540 | 100 mm X 100 mm X 60 mm deep |
| 541 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 542 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 543 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 544 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular Socket , connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 545 | Supplying and fixing of Telephone socket out let with suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing , connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 546 | Supplying and fixing brass decorative angle / Batten Holder fitting including connection etc. as requiredincluding the cost of labor & material T & P as required as EIC. |
| 547 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 548 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required including the cost of labor & material T & P as required as EIC. |
| 549 | Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required including the cost of labor & material T & P as required as EIC. |
| 550 | Installation of exhaust fan with shutters/louvers in the existing opening, including making good the damage, connection, testing, commissioning etc. as required including the cost of labor & material T & P as required as EIC. Upto 450 mm sweep |
| 551 | Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required including the cost of labor & material T & P as required as EIC. |
| 552 | Supplying and fixing of support arrangement for fixing of cable tray, light fittings ,Panel Board etc with MS angles / flats / rods /anchor flashner/extra rod for fan & Lights including jointing the steel sections of the support arrangement with nuts & bolts / welding / Febicating complete as required including the cost of labor & material T & P as required as EIC. |
| 553 | SDB\"S, MCB, ISOLATOR,CABLE,PANELS- Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) 8 way (2 + 6), Double door |
| 554 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) Single pole |
| 555 | Single pole & Neutral |
| 556 | Supplying the following Size ISI mark Aluminum conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required including the cost of material T & P as required as EIC. a- 3 core 6 sq.mm |
| 557 | Laying and fixing of one number of following size of cable on wall surface as required, ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required 25 sq. mm and upto 120 sq. mm |
| 558 | Laying and fixing of one number .following size cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required upto 25 sq. mm |
| 559 | Supplying and making end termination with brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required. 3 core 6 sq.mm |
| 560 | Panels Supply, Installation, Testing, and Commissioning of 32 Amp TPN Main switches (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, nterconnections, earthing, etc. as required as per direction of Engineer in Charge |
| 561 | Earthing Earthing with G.I. earth pipe 4.5 metre long, 40 mm including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 562 | Supplying and laying 6 SWG G.I. wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required |
| 563 | FITTING & FIXTURE-: Supplying of of PVC Exhaust fan 250 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting Frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as per EIC of approved makeincluding the cost of material ,labor T & P as required as EIC..(Make-CG/HAVELLS/RR/HALONIX/USHA) |
| 564 | Supplying of 1200 mm sweep ceiling fan ,BEE 5star Rated, Brush Less direct current(BLDC)motor,class of Insulation:B , 3nos Blade,30cm long Rod,2nos canopies,shakel kit,safety rope,copper winding, Power factor not less than 0.9, service value (CMM/W) minimum 6.85 ,Air deliver minmum 215 CMM ,350 RPM (tolearance as per IS-2019).THD not less than 10% with Remote for speed control remaining all other accessories like safety pin, nut bolts,washer, temperture rise 75degree C. max,insulation resitance more than 2-Megaohm suitable for single phase 230v,50Hz AC supply ,earthing as per EIC of approved make including the cost of material ,labor T & P as required as EIC..(Make-CG/HAVELLS/RR/HALONIX/USHA) |
| 565 | Supply, Testing & commissioning of 1 no of 10 watt LED bulb(White) as per EIC of approved makeincluding the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 566 | Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 567 | Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 568 | Supply, Installation,Testing & commissioning of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,with 35mm angled pole type fixing chanel for fixing on the parapet wall,clamp & nut bolt connecting wire all accessories (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 569 | INTERNAL ELECTICAL WORK WITH FITTINGS.-EDUCATION & RESEARCH CENTER WIRING-: Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required including the cost of labor & material T & P as required as EIC. First Point Group A |
| 570 | Group B |
| 571 | Group C |
| 572 | Looping Point .(Looping Point) (Controled by same switch-with Gr.A wire quantity Only) |
| 573 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping & UPS lighting,BDB to basement & stilt Light Points. |
| 574 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points |
| 575 | 2 X 4.0 sq. mm + 1 X 2.5 sq. mm earth wire for AC & Geyser Point.& EL+C DB wiring |
| 576 | Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit ,also including painting etc as required including the cost of labor & material T & P as required as EIC. 75 mm X 75 mm X 60 mm deep |
| 577 | 100 mm X 100 mm X 60 mm deep |
| 578 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 579 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 580 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required including the cost of labor & material T & P as required as EIC. |
| 581 | Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required including the cost of labor & material T & P as required as EIC. |
| 582 | SDB\"S, MCB, ISOLATOR,CABLE,PANELS-: Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) 8 way (2 + 6), Double door |
| 583 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) Single pole |
| 584 | Single pole & Neutral |
| 585 | Supplying the following Size ISI mark Aluminum conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required including the cost of material T & P as required as EIC. a- 3core 6 sq.mm |
| 586 | Laying and fixing of one number of following size of cable on wall surface as required, ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required 25 sq. mm and upto 120 sq. mm |
| 587 | Laying and fixing of one number .following size cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required upto 25 sq. mm |
| 588 | Supplying and making end termination with brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required. 3 core 6 sq.mm |
| 589 | Panels Supply, Installation, Testing, and Commissioning of 32 Amp TPN Main switches (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, nterconnections, earthing, etc. as required as per direction of Engineer in Charge |
| 590 | Earthing Earthing with G.I. earth pipe 4.5 metre long, 40 mm including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 591 | Supplying and laying 6 SWG G.I. wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required |
| 592 | FITTING & FIXTURE-: Supplying of 1200 mm sweep ceiling fan ,BEE 5star Rated, Brush Less direct current(BLDC)motor,class of Insulation:B , 3nos Blade,30cm long Rod,2nos canopies,shakel kit,safety rope,copper winding, Power factor not less than 0.9, service value (CMM/W) minimum 6.85 ,Air deliver minmum 215 CMM ,350 RPM (tolearance as per IS-2019).THD not less than 10% with Remote for speed control remaining all other accessories like safety pin, nut bolts,washer, temperture rise 75degree C. max,insulation resitance more than 2-Megaohm suitable for single phase 230v,50Hz AC supply ,earthing as per EIC of approved make including the cost of material ,labor T & P as required as EIC..(Make-CG/HAVELLS/RR/HALONIX/USHA) |
| 593 | Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 594 | Supply, Installation,Testing & commissioning of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,with 35mm angled pole type fixing chanel for fixing on the parapet wall,clamp & nut bolt connecting wire all accessories (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 595 | INTERNAL ELECTICAL WORK WITH FITTINGS.-DRY HAY FODDER STORAGE SHED CAPACITY WIRING-: Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required including the cost of labor & material T & P as required as EIC. FirstPoint Group A |
| 596 | Group B |
| 597 | Looping Point .(Looping Point) (Controled by same switch-with Gr.A wire quantity Only) |
| 598 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping & UPS lighting,BDB to basement & stilt Light Points. |
| 599 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points |
| 600 | Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit ,also including painting etc as required including the cost of labor & material T & P as required as EIC. 100 mm X 100 mm X 60 mm deep |
| 601 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 602 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required including the cost of labor & material T & P as required as EIC. |
| 603 | FITTING & FIXTURE-: Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 604 | INTERNAL ELECTICAL WORK WITH FITTINGS.-VERMI-COMPOST PRODUCTION WIRING-: Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required including the cost of labor & material T & P as required as EIC. FirstPoint Group A |
| 605 | Looping Point .(Looping Point) (Controled by same switch-with Gr.A wire quantity Only) |
| 606 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping & UPS lighting,BDB to basement & stilt Light Points. |
| 607 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points |
| 608 | Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit ,also including painting etc as required including the cost of labor & material T & P as required as EIC. 100 mm X 100 mm X 60 mm deep |
| 609 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 610 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required including the cost of labor & material T & P as required as EIC. |
| 611 | FITTING & FIXTURE-: Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 612 | INTERNAL ELECTICAL WORK WITH FITTINGS.-PANCHAGAVYA PRODUCTION CENTER Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required including the cost of labor & material T & P as required as EIC. FirstPoint Group A |
| 613 | Group B |
| 614 | Group C |
| 615 | Looping Point .(Looping Point) (Controled by same switch-with Gr.A wire quantity Only) |
| 616 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping & UPS lighting,BDB to basement & stilt Light Points. |
| 617 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points |
| 618 | 2 X 4.0 sq. mm + 1 X 2.5 sq. mm earth wire for AC & Geyser Point.& EL+C DB wiring |
| 619 | 2 X 6.0 sq. mm + 1 X 4 sq. mm earth wire for UPS wiring |
| 620 | Supplying and drawing following pair 0.5 sq mm FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 Pair |
| 621 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required including the cost of labor & material T & P as required as EIC. 20 mm |
| 622 | Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit ,also including painting etc as required including the cost of labor & material T & P as required as EIC. 75 mm X 75 mm X 60 mm deep |
| 623 | 100 mm X 100 mm X 60 mm deep |
| 624 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 625 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3nos 3 pin 5/6 amps modular socket outlet with 2nos 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 626 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 627 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 628 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular Socket , connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 629 | Supplying and fixing of Telephone socket out let with suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing , connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 630 | Installation, testing and commissioning of wall bracket /ceiling fittings /Hanging/Linear Hanging/LED down light/Occupancy sensor of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 631 | Supplying and fixing brass decorative angle / Batten Holder fitting including connection etc. as requiredincluding the cost of labor & material T & P as required as EIC. |
| 632 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 633 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required including the cost of labor & material T & P as required as EIC. |
| 634 | Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required including the cost of labor & material T & P as required as EIC. |
| 635 | Installation of exhaust fan with shutters/louvers in the existing opening, including making good the damage, connection, testing, commissioning etc. as required including the cost of labor & material T & P as required as EIC. Upto 450 mm sweep |
| 636 | Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required including the cost of labor & material T & P as required as EIC. |
| 637 | Supplying and fixing of support arrangement for fixing of cable tray, light fittings ,Panel Board etc with MS angles / flats / rods /anchor flashner/extra rod for fan & Lights including jointing the steel sections of the support arrangement with nuts & bolts / welding / Febicating complete as required including the cost of labor & material T & P as required as EIC. |
| 638 | SDB\"S, MCB, ISOLATOR,CABLE,PANELS- Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) 8 way (2 + 6), Double door |
| 639 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) Single pole |
| 640 | SIngle pole & Neutral |
| 641 | Supplying the following Size ISI mark Aluminum conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required including the cost of material T & P as required as EIC. a- 3 core 6 sq.mm |
| 642 | Laying and fixing of one number of following size of cable on wall surface as required, ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required 25 sq. mm and upto 120 sq. mm |
| 643 | Laying and fixing of one number .following size cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required upto 25 sq. mm |
| 644 | Supplying and making end termination with brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required. 3 core 6 sq.mm |
| 645 | Panels Supply, Installation, Testing, and Commissioning of 32 Amp TPN Main switches (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, nterconnections, earthing, etc. as required as per direction of Engineer in Charge |
| 646 | Earthing Earthing with G.I. earth pipe 4.5 metre long, 40 mm including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 647 | Supplying and laying 6 SWG G.I. wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required |
| 648 | FITTING & FIXTURE-: Supplying of of PVC Exhaust fan 250 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting Frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as per EIC of approved makeincluding the cost of material ,labor T & P as required as EIC..(Make-CG/HAVELLS/RR/HALONIX/USHA) |
| 649 | Supplying of 1200 mm sweep ceiling fan ,BEE 5star Rated, Brush Less direct current(BLDC)motor,class of Insulation:B , 3nos Blade,30cm long Rod,2nos canopies,shakel kit,safety rope,copper winding, Power factor not less than 0.9, service value (CMM/W) minimum 6.85 ,Air deliver minmum 215 CMM ,350 RPM (tolearance as per IS-2019).THD not less than 10% with Remote for speed control remaining all other accessories like safety pin, nut bolts,washer, temperture rise 75degree C. max,insulation resitance more than 2-Megaohm suitable for single phase 230v,50Hz AC supply ,earthing as per EIC of approved make including the cost of material ,labor T & P as required as EIC..(Make-CG/HAVELLS/RR/HALONIX/USHA) |
| 650 | Supply, Testing & commissioning of 1 no of 10 watt LED bulb(White) as per EIC of approved makeincluding the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 651 | Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 652 | Supply, Testing & commissioning of Surface or wall mounting 1 x 10W LED tube light fitting (5700K) including 1 no. of 10watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 653 | Supply, Installation,Testing & commissioning of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,with 35mm angled pole type fixing chanel for fixing on the parapet wall,clamp & nut bolt connecting wire all accessories (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 654 | INTERNAL ELECTICAL WORK WITH FITTINGS.-GATE/WATCHMAN ROOM Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required including the cost of labor & material T & P as required as EIC. FirstPoint Group A |
| 655 | Looping Point .(Looping Point) (Controled by same switch-with Gr.A wire quantity Only) |
| 656 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping & UPS lighting,BDB to basement & stilt Light Points. |
| 657 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points |
| 658 | Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit ,also including painting etc as required including the cost of labor & material T & P as required as EIC. 100 mm X 100 mm X 60 mm deep |
| 659 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 660 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required including the cost of labor & material T & P as required as EIC. |
| 661 | Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required including the cost of labor & material T & P as required as EIC. |
| 662 | FITTING & FIXTURE-: Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 663 | Supply, Installation,Testing & commissioning of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,with 35mm angled pole type fixing chanel for fixing on the parapet wall,clamp & nut bolt connecting wire all accessories (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 664 | INTERNAL ELECTICAL WORK WITH FITTINGS.-WEIGH BRIDGE Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required including the cost of labor & material T & P as required as EIC. FirstPoint Group A |
| 665 | Group B |
| 666 | Looping Point .(Looping Point) (Controled by same switch-with Gr.A wire quantity Only) |
| 667 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including the cost of labor & material T & P as required as EIC. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping & UPS lighting,BDB to basement & stilt Light Points. |
| 668 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points |
| 669 | 2 X 4.0 sq. mm + 1 X 2.5 sq. mm earth wire for AC & Geyser Point.& EL+C DB wiring |
| 670 | Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit ,also including painting etc as required including the cost of labor & material T & P as required as EIC. 75 mm X 75 mm X 60 mm deep |
| 671 | 100 mm X 100 mm X 60 mm deep |
| 672 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required including the cost of labor & material T & P as required as EIC. |
| 673 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 674 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required including the cost of labor & material T & P as required as EIC. |
| 675 | Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required including the cost of labor & material T & P as required as EIC. |
| 676 | SDB\"S, MCB, ISOLATOR,CABLE,PANELS- Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) 8 way (2 + 6), Double door |
| 677 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator) Single pole |
| 678 | SIngle pole & Neutral |
| 679 | Supplying the following Size ISI mark Aluminum conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required including the cost of material T & P as required as EIC. a- 3 core 6 sq.mm |
| 680 | Laying and fixing of one number of following size of cable on wall surface as required, ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required 25 sq. mm and upto 120 sq. mm |
| 681 | Laying and fixing of one number .following size cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required upto 25 sq. mm |
| 682 | Supplying and making end termination with brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required. 3 core 6 sq.mm |
| 683 | Panels Supply, Installation, Testing, and Commissioning of 32 Amp TPN Main switches (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, nterconnections, earthing, etc. as required as per direction of Engineer in Charge |
| 684 | Earthing Earthing with G.I. earth pipe 4.5 metre long, 40 mm including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 685 | Supplying and laying 6 SWG G.I. wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required |
| 686 | FITTING & FIXTURE-: Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting (5700K) including 1 no. of 20watt LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC. (MakeWipro/Philips/Leksa/LT/Jaquar/Havells/Bajaj) |
| 687 | Vstp12 Mtr. High Mast Light (400 w) |
| 688 | Land Scaping and Plantation Alfa Alfa Grass Lawn |
| 689 | Hybrid Grass Lawn |
| 690 | Land Scaping and Plants Avenue Trees i) Peepal |
| 691 | ii) Mulbery |
| 692 | iii) Gilrichida |
| 693 | III) Neem Tree- Azadirachta indica |
| 694 | iv) Bamboo |
| 695 | Shrub Plants i) Subabul Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
