|
| 1 | Taking down chowkats or framesnot exceeding 1.5 Sqm with shutters (Without taking off shutters & Grill from the frame) complete all as specified anddirected. |
| 2 | Taking down chowkats or frames exceeding exc 1.5 sq. m but n exc 4 sq. meach (Without taking off shutters & Grill from the frame) complete all as specified anddirected. |
| 3 | Providing and fixing factory made uPVC Frames (60mm x 58mm) white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) |
| 4 | Providing and fixing factory made uPVC Frames (88mm x 52mm) white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) |
| 5 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)(a)Area exceeding 2.00 Sqm Each |
| 6 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories (Net opening will be measured for payment purpose.)(a)Area exceeding 1.00 Sqm but not exceeding 2.00 sqm each |
| 7 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 8 | S & F of 16.75 mm thick UV coating, HDHMR board interior grade, including acrylic high gloss sheet of 1.5 mm thick over HDHMR board,anti fungal,moisture resistence,anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE . Make:-Action tessa/Greenply/ Century |
| 9 | S&F stainless steel medium duty telescopic slide/drawer channel 20 inches having weighing capacity of 45 kg complete all as specified and directed by Engr-in-charge. Make -Godrej,Hettich,Ozone,Hafele etc |
| 10 | M&L for decorative laminate 0.9 mm in thickness type -1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions completed all as specifed and as directed by Engr-in-Charge. |
| 11 | S&F Continuous (piano) hinges, Width of flaps (when open) in 30 mm dia, stainless steel, bright finish or electro-galvanised complete all as specifed and as directed by Engr-in-Charge. |
| 12 | S&F 100 mm dia Brass handles, cast type, polished bright as in cupboard,almirah etc complete all as specifed and as directed by Engr-in-Charge. |
| 13 | S&F Brass knobs 35-40mm dia as in cupboard,almirah etc complete all as specifed and as directed by Engr-in-Charge. |
| 14 | S&F4.8 mm thick Sheet glass ordinary quality and glazing with oil putty in Square exc 0.5 sqm in each pane complete all as specified and as directed |
| 15 | S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed |
| 16 | S&F 3mm thick WPC fluted interior louvers on walls with and including necessary interlocking SS clips and fittings & fixtures.The WPC fluted panels are interlockable and louvers should be of size 2900mmx150mm x25mm. The cost includes necessary interlocking SS clips and fittings & fixtures etc complete all as specifed and as directed by Engr-in-Charge. |
| 17 | S&F 22-32 mm thick WPC interior moulding patti on walls decorative with and including necessaryfittings & fixtures of water proof and moisture resistance,very stables and durable.The cost includes necessaryfittings & fixtures etc complete all as specifed and as directed by Engr-in-Charge. |
| 18 | M&L for complete removal of existing treatment on old plastered surfaces of walls and ceiling and applying two coats of Plastic Emulsion Paint on the plaster surfaces over a coat of primer with water proof putty of two coats complete all as specified and directed by Engineer-in-charge.Make: Berger (Glamour),Asian paints (Royal Shine),Nerolac (Impression Kashmir). |
| 19 | Dismantling boarding of any description, fixed in any position with nails/screws. |
| 20 | S&F PVC insulation panels of thickness 10mmwith EPS stuck to 1mm plain PVC sheet but 1mm printed PVC sheet used in lieu of plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing |
| 21 | M&L for 12 mm thick Gypsum Board in ceiling surfaces fixed with screw as per manufacturers instruction complete all specified and as directed. |
| 22 | S&F Gl frame work of size 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 23 | S&F in repairs Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 24 | Material and labour for providing 15mm thick superior quality chemically pressure treated edged glued finger jointed rubber wood boarding tongued grooved fixed over rubber wood frame work with rubber wood runner of size 50mm X 15mm fixed at 1200mm C/C horizontally by secret nailing with brass screws duly fixed to wall panelling,vanity cabinet,wardrobe including provision of designed rubber wood beading to top and bottom termination of wood boardingand finished with two coats of melamine polish over a coat of honey/natural colour wood filler putty etc, including preparation and applying sand paper and finishing to a glossy/mat finish complete all as specified. Make :- RUBCO or equivalent approved by GE |
| 25 | S&F bathroom LED Mirror 630x445mm rectangular shape of Kubix prime range Jaquar Cat Part NoAKP-CHR-35795 including LED light complete all as specified and directed. |
| 26 | S&Flooking mirror bevelled Edge 5 mm of any size including wooden frame work mounted on bracket as necessary requirement with chromium plated brass screws and cup washers complete all as specified and directed by the Engineer -in- charge. |
| 27 | Supply and fix in repairsvitreous china CASCADE type WC single piece-WC with PP seat Cover, hinges, fixing accessories set, cistern fittings complete of size 640 x 360 x 690 mm , P/S trap-180mmin approved colour all as specified and directed as per ISI mark. Make : Jaguar cat Part No. SLS-WHT-6851P or equivalent . |
| 28 | S&F inspiring SS Soap dispenser with metallic bottle all as specified. Make: Jaquar cat code no. CAN-1137N |
| 29 | S&F in repairs Jaguar Glass Shelf550mm longMake: Jaquar Cat Part No AQN 7771 all as specified and directed by Engineer in charge. . |
| 30 | S&F in repairs glass corner shelf, Cat No.1173 of Jaquar or equivalent, complete all as specified and as directed by Engineer-in-Charge. |
| 31 | S&F towel rack 600mm long with lower hanger with 3 hooks,stainless steelCode-AHS-CHR-1581H of Jaquar, complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Dismantling of floor, or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes. |
| 33 | M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in Cement mortor 1:6 for laying floor finishes complete all as specified and as directed. |
| 34 | M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 10 mm thick in Cement mortor 1:4 for laying floor finishes complete all as specified and as directed. |
| 35 | M&L for 25 mm thick cementconcrete type B1,1:2:4 (using20mm gradedstone aggregate) for level course finishing the surface even and fair complete all as specified and as directed. |
