|
| 1 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steelwire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core complete all as specified and directed. |
| 2 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 4 core complete all as specified and directed. |
| 3 | Supply and fix RGBW Flood Lights above 70W LED outdoor Flood Light Waterproof - IP66 LEDlights with 120° Wide Beam light, Focus Light forfront side building / flag of CSDO, Short circuit & surge protection complete including ON/OFF switch (min 15 Amps) withPVC enclosure andfixing arrengement of flood light with suitable size of fastner/ clamp on wall / poles complete all as specified and directed. Cat No HLFLD-99-100-4CDL-25D Make Halonix or equivalent in Philips / Bajaj / Crompton/ Havells. |
| 4 | Supply and errect pole 4 mtr long,double armedPole tube made out MS pipe,base & embellishment casted, with PU coating of approved colour along suitable for pendant light upto 60 W as per direction.The pole shall be mounted on RCC pedestalas per design and drawing prepared by the manufacturer all as specified and as directed by Engineer-in-Charge with following specifications:- (a) Top dia 76 mm(b) Casted dia 114 mm(c) Cement concrete 1:2:4 type B1 for foundations up of size 2\"x2\"x2\"PCC from ground level with proper fixing arrangments such as nut/bolts/washers over PCC work all as specified and directed.(d) The Rates for 2.5 Sq mm 3 core copper wire for light connction are included in quoted rates and quantity as per site requirement. Make-Halonix Cat No. HLOP-S95-4M-114/76-ACB Make Halonix or same design in Philips / Bajaj / Crompton/ Havells. |
| 5 | Supply and fixing of energy efficient 60 W LED IP65 pendant mounting street light aluminium die cast with clear acrylic front cover suitable for high efficient assymetric secondary lens LM80 certified for higher power 240 V, lumen 100 lm/W and driver efficiency 85% with all accessories internally prewired and including connecting up with twin core copper conductor cable complete all as specified and directed.Make- HALONIX Cat No. HLOSL-04-60-WWL-01or same design in Philips / Bajaj / Crompton/ Havells. |
| 6 | Supply and fixing contemporary UFO shape designbollardlightwith minimum upward light componenetin die-cast aluminium bottom housing with decorative clear acrylic 10 watt and IP65 protection including necessary fixing arrangement like PCC foundation work and electric connection for all light as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make Havells UFOBLS10W LED830PSYMTOPC and Surya Flash LED / Wipro LB12-131-XXX-65-08 Note :- The Rates for 2.5 Sq mm 3 core copper wire for light connction are included in quoted rates and quantity as per site requirement. |
| 7 | S&F decorative Stellar LED post top lantern offering combination of sturdy design execllent illumination and aesthetics ub one go IP 66 protection and IK 10 rating ensures it stands tall amid varied environmental conditionsincludingelectrical connection complte all as directed make Havells cat NoNEBULAPT40WLED857PSYMTOPC/ Wipro LP05-501-xxx-57-G2 or equivalents make or same design in Philips / Bajaj / Crompton/Surya. |
| 8 | S&F automatic street light controlled using infrared sensor based nature switch for automatic switching of street lights. Nature switch operation should be based on natural light lux level required illuminance level for switching ON/OFF. The sensor should also have part night operation facility of min 4 hrs to max 12 hrs with suitable capacity power contactors and incoming outgoing MCBs (16 to 20Amps) with circuit wiring (copper) of min 10 sqmm including thermoplastic polycarbonate enclosure confirming to IP66 protection class 2 complete capacity 5KW:- Model Swadeep-66-5kW3P/ Havells/ Legrand. |
| 9 | Supply and fix junction box of size200 mmx 140mmx 95mm mada out of HOT Press moulded SMCbox with hinged door locking includingelectric connection for singlephase incomming cable 3 phase out going cable and single phase connection for flood light fitting incl controlled MCB SP-10 Amps -01 Nosincluding suitable connector for looping duly sealed with rubber plugs.enclosed in thermo plastic inclosed shock proof safe IP-65, weather,vermin proof,dust and water proof complete with two nos cables entry incl gland of standard size with suitable size mild steel clamps or Fastner to fixed on wall/ pole complete all as specified. of MakeFinolex/Hensel/Sintex/ ABB or equivalents |
| 10 | Excavation in trenches in any type soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles &stay etc complete all as specified and as directed. |
| 11 | Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and as directed. |
| 12 | Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed. |
| 13 | M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm complete all as specified and directed. |
| 14 | Supply & Laying bricks using sub class‘B’ bricks (old size) for cable protection laid flat and dry in trenches over cable perpendicular to direction of cable, complete all as specified and directed. |
| 15 | Supply & Laying GI pipe light grade 50 mm dia bore for cable protection with all fittings for passing the under ground HT cable under road crossing along poles walls and floors complete all as specified and as directed. |
| 16 | M&L for cutting of Hardstanding/ road by mannual method upto 200mm deep for inserting GI pipefor cable protection complete including ready mix concreate and making good distrubed surfaceall as specified and as directed. |
| 17 | Supply, laying cable in cable tray/wall /poles/ under floor/above false ceiling and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sq mm 3.5 core complete all as specified and directed.Note:- Safe removal and refixing of false ceiling shall be deemed to be included in the quoted unit rate. |
| 18 | All as per item No-17 above but cable size 95 sqmm 3.5 core |
| 19 | Supply & fix of MCCB 630 amps 3 pole 35 KA 415 volts 50 HZ complete all as specified and as directed. |
| 20 | Supply and fixoff-load changeover switch 320 Amp4 pole ,415 V, including necessary fixing arrangment complete all as specified and directed. |
| 21 | Supply, installing, testing, design and commissioning of factory fabricated indoor type totally enclosed LT cubical panel board suitable size with suitable sizebusbar, conforming to relevant IS and protection class IL-65 ,dust,vermin and weather proof fabricated out of 3.15mm thick CRCA sheet duly powder coated ,mounted on 40x40x5mm MS angle iron frame,duly welded in shape including necessaryfixing arrangments with suitable compartments for controls and Monitors including cable glands for incoming and outgoing cables,locking arrangement,including accomodating, supply and fixing the following accessories/items including necessary internal panel wiring with suitable size of Copper wire PVC insulated & sheathed multi stranded complete all as specified and as directed.Incoming :-(a) MCCB 250 Amp 3 pole 25KA(incoming) -01 NosOutgoing :-(a) MCCB 160 Amp 3 pole 25 KA -02 Nos(b) MCB TPN 63 Amp -04 Nos(c) MCB TPN 40 Amp -06 Nos(d) MCB TP 32 Amp -06 Nos(e) MCB DP 63 Amp -04 Nos(f) MCB DP 40 Amp -01 Nos(g) RYB Phase Indicating Lamps LED Type - set of three(h) Bus bar suitable size |
| 22 | M&L sub main wiring with two single core PVC insulated unsheathed cable 10.00 Sqmm (Nominal area) with multistranded FRLS copper conductor cable, 1100 volts grade drawn through and including non metallic rigid PVC conduit, medium grade of size not less than 25mm with accessories and earth continuity conductor of single core PVC insulated, unsheathed cable 10.0 Sqmm (Nominal area) with multistranded copper conductor, 1100 volts grade and making good disturbed surfaces complete all as specified and directed. Note - (i) Two run of wiring cable, one run of earth wire and one run of PVC casing & capping shall be measured as one unit. |
| 23 | M&L sub main wiring with two single core PVC insulated unsheathed cable 6.00 Sqmm (Nominal area) with multistranded FRLS copper conductor cable, 1100 volts grade drawn through and including PVC casing & caping of size not less than 25mm dia with fixing accessories and earth continuity conductor of single core PVC insulated, unsheathed cable 6.0 Sqmm (Nominal area) with multistranded copper conductor, 1100 volts grade and making good disturbed surfaces complete all as specified and directed. Note - (i) Two run of wiring cable, one run of earth wire and one run of PVC casing & caping shall be measured as one unit. |
| 24 | M&L sub main wiring with two single core PVC insulated unsheathed cable 4.00 Sqmm (Nominal area) with multistranded FRLS copper conductor cable, 1100 volts grade drawn through and including PVC casing & caping of size not less than 25mm dia with fixing accessories and earth continuity conductor of single core PVC insulated, unsheathed cable 4.0 Sqmm (Nominal area) with multistranded copper conductor, 1100 volts grade and making good disturbed surfaces complete all as specified and directed. Note - (i) Two run of wiring cable, one run of earth wire and one run of PVC casing & caping shall be measured as one unit. |
| 25 | S&F sheet metal enclosures MCB DB 4 way TPN, double door, vertical type, with 200 Amp rated bus bar including earth & neutral link, IP 54 protection, complete fixing accessories complete all as specified and directed. |
| 26 | S&F Miniature circuit breaker (MCBs) Triple pole and Nuetral, 415 Volts, 63Amps, 10 KA with current carrying capacity in the DB complete all as specified and directed. |
| 27 | S&F sheet metal enclosures MCB DB 12 way SPN, double door, with 200 Amp rated bus bar including earth& neutral link, complete fixing accessories and taking out existing unserviceable MCB DB SPN etc any number of ways including MCB etc removing materials from site and making good disturbed surfaces of floors/walls/ceiling etc complete all as specified and directed. |
| 28 | S&F sheet metal enclosures MCB DB 8 way SPN, double door, with 200 Amp rated bus bar including earth& neutral link, complete fixing accessories making good disturbed surfaces of floors/walls/ceiling etc all as specified and directed. |
| 29 | S&F Miniature circuit breaker (MCBs) single pole and Nuetral, 240 Volts, 10KA, 6 to 32 Amps, \"C\" cure complete all as specified and directed. |
| 30 | S&F Miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, 5 to 32 Amps, \"C\" cure complete all as specified and directed. |
| 31 | M&L for concealed point wiring with single core PVC insulated unsheahed 1100 volt grade cable with multi strand copper conductor of size 1.5 Sqmm FRLSH (Nominal area) drawn through and including non metallic rigid PVC conduit, medium grade, ISI marked not less than 20mm dia, with all fittings including Tee, Junction boxes and provision of Modular Metal flush box and white plate with frame of suitable module for mounting switch sockets and regulaors and drawing continous earth wire of PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 1.5 Sqmm (Nominal area) for one 3 pin socket outlet , 6 Amps on Independent board. complete all as directed.(a) Modular Metal flux box and white plate with frame of suitable module also included in the unit quoted rate of item.(b) The wiring shall be provided in standard colour code i.e Red for Phase, Black for Neutral and Green for earth.(c) The quoted rate is deemed to include for cutting / chasing for concealing the conduit and making good the surface to match the existing surfaces.(d) In case of ceiling portion where concealed conduiting is not possible , the furface conduit shall be provided as directed.(e) The earth wire shall be connected to common earth and each terminal boxes and fitting all as directed. |
| 32 | All as per item No 31 above but with copper conductor cable FLRS 2.5 sqmm for one 3 pin socket outlet,15 Amps concealed and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. |
| 33 | S&F Switch modular type one way 6 Amps, 1 module, suitable for 240 volt AC Complete all as specified and directed. |
| 34 | S&FModular socket6A, 3 pin combined 2 module, suitable for 240 volt AC complete all as specified and directed. |
| 35 | S&F Modular switch 1 way 16A, 1 module suitable for 240 volt AC complete all as specified and directed. |
| 36 | S&FModular socket 16A, 2/3 pin combined 2 module, suitable for 240 volt AC complete all as specified and directed. |
| 37 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete,such as switches, ceiling roses,pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc.complete all as specified and directed. |
| 38 | M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor1.5 Sq. mm (nominal area), single core, For one light point controlled by one SP switch PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 markedin and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, includingmild steel sunken boxes with earth dolly duly powder coated suitable for modulater plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. ( Note- Modular Switch and sockets will be measured and paid seperately). |
| 39 | All as per item No 38above but For one fan/exhaust fan and wall mounted fan point controlled by one SP switch. |
| 40 | All as per item No 38above but For one bell point controlled by one No bell push |
| 41 | All as per item38 above but for one 3 pin socket out let, 6 Amps on same board |
| 42 | M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor4 Sq. mm (nominal area), single core, for Independent board one 3 pin 15 Amps socket outlet PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 markedin and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, includingmild steel sunken boxes with earth dolly duly powder coated suitable for modulater plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 4 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. ( Note- Modular Switch and sockets will be measured and paid seperately). |
| 43 | S & F Electronic modularFan Regulator rotary flush step type 120 watt, 2 module , 240 volt50 Hz AC complete compatible with BLDC fans complete all as specified and directed. |
| 44 | S & F Bellpush Modular flush type 6 Amps suitable for 240 voltAC Complete all as specified and directed. |
| 45 | M & L for Point wiring with single core PVC insulatedbut unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked For one light point controlled by one switchdrawn in and including rigid non metallic PVCconduit medium grade not less than 20 mm diaISI marked with all conduit fittings and fixing accessories in concealed wiring system including necessary cutting, chasing and making good the distrubed surface of wall including powder coated pressed steel boxes with bakelite sheetfor mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulatedmultistranded copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly complete all as specified and directed by Engr- in- Charge . |
| 46 | All as per item No 45 above but For one fan/exhaust fan and wall mounted fan point controlled by one switch. |
| 47 | All as per item No 45 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size. |
| 48 | All as per item No 45above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size. |
| 49 | Supply and fixing of electric ding dong bell, 230 volt AC, single pole, complete, all as specified and as directed. |
| 50 | Supply and fixing of stepped fan regulator 120 watt, 230 volts, 50 HZ, AC.Complete allasspecified and as directed. |
| 51 | Supply and fixing of switch piano flush type 5 Amps, single pole one way complete, all as specified and directed. |
| 52 | Supply and fixing of socket out let 3 pin 5 Amps, flush type complete, all as specified and directed. |
| 53 | Supply and fixing ofceiling roses, surface bakelite 65x50mm 3 terminals , PVC/Polycarbonate, isolated body fixed on PVC round blockcomplete all as specified and directed. |
| 54 | Taking down old unsv MCB DB of any size complete all as specified and directed. |
| 55 | Supply, installation, testing and commissioning cubicle type, meter box, indoor type, totally enclosed,dust & vermin proof (protection class IP43) made out of CRCA sheet of 2.0 mm thick as per IS-5039with powder coatedof approved shade. the meter bos to be mounted on wall and having the following items:- (i) Space for 1 No. 3 phase perpaid meter with glass window for meter reading.(ii) MCB TPN 63 Amps 4 Pole 415 V,10 KA- 01 no. (Incoming)(iii) MCB TPN 63 Amps 4 Pole 415 V,10 KA- 01 no. (Outgoing After meter)(iv) MCB SP 32 Amps,240V,10 KA - 6(v) MCB SP 16 Amps,240V,10 KA- 4(vi) MCB SP 6 Amps,240V,10 KA- 12(vii) MCB SPN 40 Amps,240V,10 KA- 2 (For servant Qtr)The panel shall be suitable to be mounted on wall with suitable fixing arrangement. Each cubicles shall have openings for entry and exit of cables and locking arrangements and re-fixing the existing meter in each cubicals complete all as specified and directed.Note- Taking down and refixing of existing prepaid meter with new seal is deemed to be included in the above item. |
| 56 | Supply and fix MCB DB SPN 4 way double door with 200 amp rated bus bar neutral link, made out of CRCAmild steel sheet230 Volt, horizontal type complete all as specified and directed. |
| 57 | Supply and fixing MCB SPN240V, 10 KA \"B\" curve and current carrying capacity 40 A, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 58 | Supply and fixingMCB SP 240V, 10 KA \"B\" curve and current carrying capacity 6 to 32 A, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 59 | Supply and fixing wall mounted LED bulk headfittings, 10 watt, warm white/white, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cablefrom ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-in- Charge. |
| 60 | Supply and fix LED batten luminaire surface mounted ,4 feet system wattage of not less than 20 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 4000 to 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 Lumens/watt, filcker free (Ripple less than 5%) andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed with 5 years of replacement warranty on fittings completeallas specified and directed. |
| 61 | S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp.Fixture should have minimum efficiencyat system level >=100 lumens/Watt, life of fixture not less than 50K Hrs,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240v Ac.An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed. |
| 62 | Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 230 CMM,350 RPM (tolerance as per IS:374-2019), THD less than 10%,including remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and directed. |
| 63 | S&F Exhaust fan 300 mm sweep, copper winding,metal body, four metal blades BEE approved/ISI marked, air delivery shall not be less than 1600 CMM at 1400 RPM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cablefixed in position as recommended by manufacturer complete all as specified. |
| 64 | Supply and fix exhaust fan made of sturdy Engineering PVC complete with louvers, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 65 | Supply and fixing surface mounted round shape 15 watt LED ceiling fitting complete with all accessories, connecting upto with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and directed. |
| 66 | Supply installation commissioning testing of tripot earthing complete with copper bonded earthing electrode chemical earthing system outer electrode dia 25 mm and 3 mtr long tightly filled with crystalline conductor mixture 250 microns copper coated along with bag of back bill compound 50 kg buried directly in the ground (earth pit not less than 2.25 meter deep below ground level) connected to and including galvanized iron strip 4 mm dia as earth lead by means of GI bolts,nuts,check nuts and washers and connecting earthing test point ,including CI covers ,frame and PCC (1:3:6) type C-2 using 20 mm graded stone aggergate as in earthing pit with CI cover and framing including necessary earth work etc complete all as specified .Note- PCC chamber shall be constructed at least one meter away from the building shall be provided in slanting manner.Note- PCC cover pit shall be precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) 80 mm thick reinforced with XPM weighting not less than 4 kg (sqm in liew of CI) |
| 67 | Supply & fixing in replacement IP 66 die cast aluminium post top lantern designed with ling life LED engine & electronic driver, designed for glare free symmetrical light distribution of capacity 40 watt complete all as specified and directed. |
| 68 | S&F Decorative, wall mounting Double Wall Light with Sleek Design suitable for 9 Watt LED lamp B22 base withflexible copper wire, twin core cable complete all as specified and directed by Engineer-in-Charge. Make-Philips/havells/halonix or equivalent. |
| 69 | Supply, Laying, Testing and connecting cable XLPE insulated armoured heavy duty electric cable with stranded aluminium conductor 1100 volts grade cross section area of 10 sqmm 2 core complete all as directed. |
| 70 | Supply,install test & commmissioning of high wall mounted inverter type split AC ,having indoor and outdoor units with copper tube evaporator & condensing unit of capacity 1.5 Ton capacity complete with cordless remote control unit and with minimum 5 star rated and EER 5.05 with necessary fixing arrangements,drain water piep upto required length ,stand for outdoor unit ,with 3 core PVC insulated and PVC sheathed copper cable of required sizecomplete all as specified and directed. |
| 71 | S&F refrigerant line copper tube 1/2\" bore including insulation of AC pipe complete all as specified and directd. |
| 72 | S&F refrigerant line copper tube 1/4\" bore including insulation of AC pipe complete all as specified and directd. |
| 73 | S&F of PVC pipe of size 20 mm dia fixing on wall by using clamps and screwing including necessary tee, collar, bend, socket etc complete all as specified and directed. |
| 74 | S&F of flexible thredded from indoor unit to main line size of 15/20 mm dia, fixing on wall by using clamps and screwing complete all as specified and directed. |
| 75 | S&F of single pole and neutral enclosure 240 Volts with two pin and earth plug and socket complete with one single pole MCB of 20 Amps rating complete all as specified and directed. |
| 76 | Supply and laying of XLPE LT 1100 Volt Grade, armoured under ground cable size of 16 Sqmm 4 core with stranded aluminium conductor in trenches / passing through pipes / on poles etc complete all as specified and directed. |
| 77 | Supply and fixing load line vertical distributionboard made out of CRCA sheet, double door, surface mounting TPN 4 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable for TP incomer MCCB of 160 Amps complete all as specified and as directed. |
| 78 | S&F of MCCB 160 Amps FP 415 volts 3 Phase 50 Hz, Ics=100% Icu, breaking capacity 36 kA complete all as specified and directed. |
| 79 | S&F MCB DB VTPN 8 ways with provision for FP MCB/isolator/RCCB/MCCB etc as incomer and SP/TP MCBs as out going double door IP 54 complete prewired including Bus bar etc suitable for operation on 415 Volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/Stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed by Engineer-in-Charge.(Note- MCCB/MCBs will be measured and paid seperately) |
| 80 | M&L forearthing complete with GI earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to GI earth wire 4mmby means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick mixture in equal ratio of magnesium sulphate& copper sulphate in all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plateNO 5 of SSR Part I (1991)and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all asspecifiedNote :- PCC chamber shall be constructed at least one meter away from building shall be provided in slanting manner. |
| 81 | All as per Item No 80above but using galvanised earth strip 25x4 mm as earth lead. |
| 82 | M&Lof earth contuinity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc with galvanised iron strip 32 x 6mm complete all as specified and directed. |
| 83 | S & F in replacementfixed thermal and fixed magnetic settings, MCCB 4 Pole, 415 V, 400 Amps, Ics=100% Icu with breaking capacity 36 KA including necessary fixing arrangements, extra links if required etc complete all as specified and directed. |
| 84 | S&F in replacement MCB Single pole6 to 32 Amps, 230 volts 50 Hz AC supply,10 KA\"B\" series. complete all as specified and directed. |
| 85 | S&F in replacement MCB TP 63 Amps, 415 volts 50 Hz AC supply,10 KA\"B\" series. complete all as specified and directed. |
| 86 | Supply, laying, jointing and testing LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strips armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed with necessary cable glands at end, aluminium lugs for connecter and taking out of old cable complete all as specified and directed. |
| 87 | Supply, laying, jointing and testing LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strips armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3½core complete all as specified and directed with necessary cable glands at end, aluminium lugs for connecter and taking out of old cable complete all as specified and directed |
| 88 | Supply, laying, jointing and testing LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strips armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35sq mm 3½ core complete all as specified and directed with necessary cable glands at end, aluminium lugs for connecter and taking out of old cable complete all as specified and directed.Note: (i) Excavation and earthwork, sand & cable cover will be measured & paid separetely complete all as specified and dirceted by Engr-in-Charge |
| 89 | Supply, laying, jointing and testing LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strips armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3½core complete all as specified and directed with necessary cable glands at end, aluminium lugs for connecter and taking out of old cable complete all as specified and directed.Note: (i) Excavation and earthwork, sand & cable cover will be measured & paid separetely complete all as specified and dirceted by Engr-in-Charge |
| 90 | Supplying and laying unreinforced precast cement concrete cable covers, Class LV, Type - 1, Flat, size 250mm X 180mm X 40mm in trenches for cable protection, embossed with \" ELECTRIC\" on the top surface complete all as specified and as directed by the Engineer - in - Charge. |
| 91 | M& L for Fabricate, supply and install cubicle type, CPRI approvedLT panel board,outdoor type, totally enclosed,dust & vermin proof (protection class IP 65) front opening with selflocking arrangment made out of MS angle iron frame work, MS flat iron and CRCA sheet of 3.15 mm thick as per IS 5039 duly painted with powder coated paint of approved shade. The panel shall be suitable for 415 volts,50 Hz, 3 phase 4 wire system and shall be complete with 500 amp capacity aluminium bus bar (4 Nos),wiring the panel board with suitable size of PVC insulated, multi stranded copper cables and all connected acessories required for functioning of panel board such as thimbles,glands, bolts, nuts,washers etcincluding supply and fixingfollowing acessories : -(a) Aluminium bus bars fixed on epoxy bus bar insulator capacity 560 amps 1 set ( 3 phase and one natural).(b) MCCB 350 amps TPN 35 KA-01 Nos, ICS=100% ICU (Incoming) with RHOM(c) MCCB 250 amps TPN 25 KA-01 Nos, ICS=100% ICU (Outgoing) with RHOM(d) MCCB 100 amps TPN 25 KA-02 Nos, ICS=100% ICU (Outgoing) with RHOM(e) MCCB 63 amps TPN 25 KA-01 Nos,ICS=100% ICU (Outgoing) with RHOM(f)MCCB 40 amps TPN 25 KA-01 Nos, ICS=100% ICU (Outgoing)FOUNDATION : (i) Platform for the panel with PCC 1:2:4 type D-2 with 40mm graded crushed stone 15 cm thick in foundation brick work in 1:6 with sub class \"B\" old size bricks with sandering 15mm in CM 1:6 of exposed surface and 100mm thick PCC padding 1:3:6 type C-1 (using 20mm graded stone aggregate) on top plate from shall be such that it is of a height 45 cm above nearest road level. |
| 92 | Dismantling of existing LT panel with all electrical cable connections and kept in safe custody for sch of credit including making good the distrubed surface of switch room using suitable material complete all as dpecified and as direcvted by Engineer-in-charge |
| 93 | Supply install and commissioning cubical type metal box indoor type totally enclosed dust & vermin proof (protection class IP 43) made out of MS angle iron frame work MS flat iron and CRCA sheet of 2.0 mm thick as per IS-5039 with powder coated of approved shade. The meter box shall be suitable for acomodating 12 Nos single phase LT electric energy meter and 01 Nos of 3 phase LT electric energy meter in an independent cubicals with fibre glass of suitable size fixed on front side of the cubicals to view the meter readings and MCB SPN 40 Amps \"C\" in out going of each single phase meter and MCB TPN 63 APMS \"C\" Series in outgoing of three phase meter . The panel shall be suitable to be mounted on wall with suitable fixing arrangment each cubicales shall have openings for entry and exist of cables and locking arrangement complete all as specified and directed by Engineer-in-charge including necessary copper lugs for wires, cable glands etc. |
| 94 | Taking down of existing electric meter from wall and re-fixing the same meter in eaqch cubicals of meter box of Item No 20 with all electric connections and with parallel home display unit complete all as specified and directed |
| 95 | Supply testing laying of 6 core control cable to connect meter to parallel home display split unit for access of data / operation including two cable end connections (RJ-11) punching complete all as specified as per required |
| 96 | Supply & fixing of three core flexible copper conductor cable of size 2.5 sqmm from junction box to led street light connecting up with complete all as specified and as directed. |
| 97 | Supply and fixing of junction box of size 200mmx150mmx100mmmade out of FRP with double stud hinged door locking including electric connection for 3 phase outgoing cable and single phase connection for street light fitting incl controlled MCB SP 10 amps -01 Nos with dinrail for mounting of MCB including suitable connector for looping duly sealed with rubber plugs enclosed in thermo plastic enclosed shock proof IP-65 weather vermin proof dust and water proof complete with Nos cable entry incl glands of standard size with suitable size mild steel clamps to fixed on pole complete all as specified and directed by Engineer-in-charge. Make-Finolex / Hensel / Sintex |
| 98 | Supply installation and commissioning of free standing floor mounted dust and vermin proof automatic timer switch box panel board, outdoor type fabricated with 3.15mm thick CRCA MS sheet for load bearing members and 2mm thick for doors and covers and shall be painted with epoxy powder paint by means of electro static gun after regorous pre treatment comprising a cold phosphasing process on all internal and external surfaces after due preparation of surfaces panel should be front openable with double stud hinged door and locking arrangement and provided with suitable size of TPN bus bars of high conductivity copper alloy and shall be provided with colour coded heat shrinkable sleeves. The panel shall be fixed with angle iron frame made of angles of size 50x50x6mm embeded 200mm below ground level in PCC 1:2:4 Type B-1 using 20mm grade stone aggregate 600mm above ground level comprising the following : -(a) ML-4 contactor, TP 70 amps 415 volts 50 HZ-01 Nos(b) Digital timer switch 20 amps capacity -01 Nos (c) MCCB TP 63 amps 415 volts 50 HZ 10 KA breaking capacity -01 Nos ICS=100% (Incoming)(d) MCB SP 32 amps 240 volts 50 HZ 10 KA-03 Nos |
| 99 | Dismantling of unserviceable worn out damaged ACSR conductor service feeder of any size from pole after disconnecting of jumpers and insulator binding complete all as specified and directed by Engineer-in-charge |
| 100 | Dismantling concrete poles struts of any size and keeping them in safe custody for taking of schedule of credit complete all as specified and as directed by Engineer-in-charge |
| 101 | Supply, install erect in trench vertical position steel tublar seweaged welded poles complete with MS base plate of 6mm thick of size 450mm x 450mm final taper plug pole cap bolt nut and screwed, pole made out of ERW MS tubing confirming to IS 2713 Part II of 9.0 mtr long 410 SP-31swan neck type including drilling of holes of required size and nos for fixing of cross arms bracing support/ taking out of cables etc, with inbuilt junction box for 3 phase 4 wire AC supply with 4 way connector 100 amps capacity and one NO SP MCB 6 amps capacity and painting with one coat of red oxide primer and two coat of aluminium paint for exposed surface and two coat of black bituminious paint for the portion embeded in concerete complete all as specified and as directed by Engineer -in-charge including necessary PCC in foundation and coping all as per SSR part-I . |
| 102 | Supply and fixing in repair LED street light fitting 90 watt 230 Volt AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver lamp suitable for stel tubular pole swan neck type with 3 core cable 2.5 sqmm PVC insulated and sheathed copper from fittings to junction box of pole and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete all as specified and as directed. |
