|
| 1 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. |
| 2 | Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre using paving bitumen VG-10 |
| 3 | M & L premix bituminous macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified. |
| 4 | M & L bituminous premixed carpet 3 cm consolidated thickness using paving bitumen VG-30 with 0.405 cum of stone chippings mixed with 21.9 kg of binder, rolled and compacted to required camber and gradient all as specified. |
| 5 | M & L premixed sand seal coat using paving bitumen with 0.06 cu.m. of sand mixed with 6.8 kg of bitumen VG-30, applied and rolled to a uniform smooth surface all as specified. |
| 6 | M&L for Painting lines, dashes, arrows, letters,etc. on roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow with adequate no. of coats |
| 7 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 8 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (Below or above ground level) incl removal not exc 100m all as spfd directed |
| 9 | M&L for PCC 1:3:6 type C2 (using 20mm graded aggregate) as in subbases/ sub floors/pavings etc. complete all as specified and as directed |
| 10 | M&L cement concrete work in pavement/hardstanding of flexural strength 40 kg/square centimeter in field using 400 kg of cement per cubic meter, thickness of concrete 25 cm or less all as spfd directed |
| 11 | Finishing surface of concrete roads, pavements by brooming complete |
| 12 | M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for 100mm thickness of concrete slab |
| 13 | M&L for Forming Contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound Grade ‘B’ |
| 14 | Material only for non-metallic floor hardener applied over concrete surface as per manufacturer’s instructions complete all as specified and direcrted |
| 15 | Dismantling for Stone slabs and tiles/interlocking paver block of any description or thickness in floors, aprons etc laid dry or laid dry and pointed |
| 16 | M&L for Sand filling under floors or in foundations including watering and consolidation |
| 17 | M&L for Machine pressed precast concrete coloured interlocking paver block any shape, size & color (as approved) confirming to IS 15658-2006 of 80 mm thickness M-40 Grade fixed with grey cement and pigment |
| 18 | M&L for PCC 1:5:10 type E2 (using 40mm graded aggregate) as in subbases/ sub floors/pavings etc. complete all as specified |
| 19 | Demolition of brick work, stone/boulder masonary built in cement mortar complete all speecified and directed |
| 20 | M&L precast cement concrete block masonry with solid blocks of plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) exc 10 cm in width and setting in CM 1:6 complete all as specified and directed. |
| 21 | M & L cement concrete 1:2:4 type B1 (20mm aggregate) in coping complete all as specified and directed. |
| 22 | M & L cement concrete 1:2:4 type B2 (20mm aggregate) in surface channel complete all as specified and directed. |
| 23 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. |
| 24 | Extra for forming fair finished drains or channel 30 cm inner girth in cement concrete , using extra cement including form, moulds, mitred / stopped ends etc complete as specified and directed. |
| 25 | M & L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | Demolition reinforced cement concrete in any description and in any position complete all as specified and directed. |
| 27 | M&L for pre-cast reinforced cement concrete as in cover slabs (1:2:4) type B1 using 20mm graded stone aggregate complete set in cement mortar 1:6etc complete all as specified and directed . |
| 28 | M & L Mild steel TMT bars 6 to 8mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed. |
| 29 | M&L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.Fe-410-0 Gde E-250 Quality A |
