|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil & refilling of earth as required. |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground |
| 3 | Cement concrete type D21:4:8 (40mm graded aggregate) in foundations, filling and mass concret.M&L |
| 4 | Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6.M&L |
| 5 | Flush pointing to random rubble masonry, uncoursed or brought upto courses built in cement mortar 1:4.M&L |
| 6 | Providing, cement concrete B0 1:2:4(12.5mm graded aggregate) in copings kerbs, rounded or chamfered on edges.M&L |
| 7 | Broken glass coping on top of walls with cement mortar 1:3.M&L |
| 8 | Cement concrete in foundations, filling and mass concrete type B2 1:2:4(40mm graded aggregate).M&L |
| 9 | Formwork to flat sides of concrete in rough finished foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. |
| 10 | Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6.M&L |
| 11 | M&L forrendering 12 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces on wall complete all as specified and directed to be finished even and smooth (without using extracement. |
| 12 | Preparation of new plastered wall surface applying Finishing wallswith alkali resistant priming coat and apply cement paint two coatsof smooth exterior paint of required shade on exiting treatedsurface complete all as specified and directed. Make - Asian, Berger,Nerolac |
| 13 | Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.S&F |
| 14 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. soft loose soil. |
| 15 | Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) but in wire entanglements aprons, barriers, gates,etc. S&F |
| 16 | S&F GI concertina coil 600mm dia (50 turn/coil) expendable 6 to 08 mtr. Fixed on angle iron frame over brick wall/angle post all as specified as directed. |
| 17 | Prepairation of new steel surfaces and painting of synthetic enamel two coat on steel surfaces withof any description, over 10 cm in width or girth, not otherwise described.M&L |
| 18 | PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, laid in trenches or in floors.S&F |
