|
| 1 | Providlng and laying Polished Granite Jet Black stone flooring in req0ired design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.{Chapter No.14 Si.No.27} |
| 2 | Providing and fixing tiled false ceiling of specilled materials of size 595x595 mm in lrue horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanlzed @ \"120 grams/ sqtn, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel lo form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, Iight fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using Gl slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm Gl adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Gl Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G lsheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory paintedafter bending |
| 3 | Installation of Submersible pump ISI marked (1.50HP) etc.all complete. |
| 4 | Supply and fixing 1100 liter Pvc. sintex water tank etc. All complete. (19-Chapter Sr.No.2(c)) |
| 5 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc.(d) 15mm nominal outer dia pipes. (Chapter No.23 Si.No.2A) |
| 6 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc.(d) 25mm nominal outer dia pipes. (Chapter No.23 Si.No.2A) |
| 7 | Supply and Fixing of Light Fitting Switch Board. (None Sheduled) |
| 8 | Supply and Fixing Wiring of Light Point. (None Sheduled) |
| 9 | S/L/J of 20mm dia PVC Cunduct Pipe etc. all complete. |
| 10 | Supply & Fixing of wiring Sub Main. |
| 11 | Supply & Fixing of Plug Point 15mm. |
| 12 | Lettering & Painting of wall etc. all complete. |
| 13 | Supply & Fixing of 27watt. CFL etc. all complete. |
| 14 | Providing and Laying Vitrified Tiles 500x500mm Size (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand manufacture, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. Including 75mm thick base with concrte 1:4:8 complete as per E/I etc. all complete. (Chapter No.14 Sr.No.20) |
| 15 | Providing and Fixing white Vitreous China wash basin size 630x450mm with Pair of 15mm C.P. brass pillar taps including etc. all complete. (Chapter No.24 S.I. No. 3(A)) |
| 16 | Supply and fixing Bansi Paharpur (Red/White) bharra sand stone fully moulded, Engraved, carved with polishing and dressing including clamp and fashners of pillar set with all complete work etc. (None Schedule) |
| 17 | Constructing masonry Chamber brick work with common burnt clay F.P.S.(non modular) bricks of class designation 150 in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.l. surface box 100mm top diameter, \"100 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement nrortar:3 (1 cement: 3 coarse sand) 12 mm thick, iinished with a floating coat of neat cement complete as per standard design 120x120x100 cm lnside |
| 18 | Supply and Fixing Stainless steel (Grade 304) ralling made of Hollow tubes, channels, plates etc. Including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary steel nuts and bolts complete. I/C fixing the ralling with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts fasteners etc.). (Chapter No.10 SI. No. 14 New) |
| 19 | Two track two panel sliding window made of ( big series) frame 67x50 mm & sash 46x62 mm both having wall thickness of 1.9 +- 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) |
| 20 | Red Sand stone work for wall lining etc. (Veneer work) 30mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) including camping jointing in white cemnet mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching complete. (Chapter No.18 Si.No.1 New) |
| 21 | Sub Total (A) |
| 22 | Add/Deduction Rs. For Estimate Figure Amount Match |
| 23 | Grand Total Please Enable Macros to View BoQ information |
