|
| 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.1.1 + 5.1.2 |
| 2 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l.B.C.D. S.O.R. Item No. 5.1.10 |
| 3 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.6.3 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.1.2 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.1.1 |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and stringcourses,fillets,columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)B.C.D. S.O.R. Item No. 5.3.10 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.B.C.D. S.O.R. Item No. 5.3.17.1 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.B.C.D. S.O.R. Item No. 5.3.17.6 |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.9.1 |
| 10 | Providiag designation 75B brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.B.C.D. S.O.R. Item No. 5.2.6 |
| 11 | Providing and laying damp-proof course 50mm thick with cementconcrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).B.C.D. S.O.R. Item No. 5.3.5 |
| 12 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thickmortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.B.C.D. S.O.R. Item No. 5.2.14 |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).B.C.D. S.O.R. Item No. 5.3.11 |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.B.C.D. S.O.R. Item No. 5.3.17.5 |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.B.C.D. S.O.R. Item No. 5.3.17.3 |
| 16 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.7.6 |
| 17 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l.B.C.D. S.O.R. Item No. 5.7.3 |
| 18 | Providing and laying cramic glazed floor tile all complete as per drawing apecifiction and draction of E/I. (DSR 11.38) |
| 19 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with gray cement slurry, flush pointed with white cement including rubbing, polishing, and cost of curing, taxes and royalty all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.6.23.2 |
| 20 | Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20 x 6 mm M.S flats or 16mm M.S square bars fitted on 25 x 5 x 6mm M.S angle frame of size 60 x 60 x 6mm including cost of fabrication providing necessary locking arrangement with haskal end dommy duly fixed in P.C.C. (1:2:4) block of required size, applying a priming red lead paint over steel work including cost of fabrication, carriage to site taxes all complete as per drawing specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.30 |
| 21 | Supplying, fitting and fixing 20 gauge G.C.I. sheet gate fitted on. M.S. angle frame of size 60 x 60 x 6mm including cost of fabrication providing necessary locking arrangement with haskal end dommy duly fixed in P.C.C. (1:2:4) block of required size, applying a priming red lead paint over steel work taxes all complete as per drawing specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.29 |
| 22 | Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer\"s specification and direction of engineerin-charge. (DSR 9.145) |
| 23 | Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (±0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 3 E/I (DSR 9.146) |
| 24 | Providing TMT steel reinforcement 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.5 |
| 25 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.18 |
| 26 | PFinishing walls with premium acrylic smooth exterior paint with sillicone additives of requited shade . New work : 2 or more coats applied @1.43 Ltr/10sqm over and including base coat of waterproofing cement paint applied @2.2 Kg/10 sqm D.S.R S.O.R. Item No. 13.47.1 |
| 27 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.41+5.8.43 |
| 28 | Providingdesignation125mmthickreinforceddesignation75Abrickwork inCM(1:4insuperstructurewithapprovedqualityofcleancoarsesandofF.M.2to25includingthecostofscreening,carriageofmaterials, scaffolding , rakingout joints to15mmdepth, curing,taxes and royalty (but excluding the cost of reinforcement) allcomplete as per building specification and direction of E/I.5.2.23 |
| 29 | Providing12mmcementplaster(1:3)withcleancoarsesandofF.M.1.5 including screening, curingwith all leads and lifts of water,scaffolding taxes and royalty all complete as per buildingspecification and direction of E/I |
| 30 | Supplying and filling of brick bats in soak pit all complete job.D.S.R. 0362 |
| 31 | Supplying,finingandfixingviterouswhiteglazedearthenwareI.W.CofParryHindustanoranyotherI.S.Sapprovedmakewith100mmH.C.I\"p\"trap15litersC.I.or C.pull and let go flushing cistern of namesorother I.S. Sequivalentmake,completewithallfittings.C.IorC.Cbrackets32mmalkathene/P.V.Ctelescopicflush,pipeabout2MlongwithonebrasscouplingandclampsG.Ichainandpull including supplying and fixing a pair of viterouswhite glazed earthenwarewherefootrest to be fixed in floor 15mm C.Ibodybrassspindlestopecockofweightnot less than50 grins.15mmP.V.Cconnectionpipe450mmlongandthe exposed pipe and cistern with two coats of approvedpaint over acoat of redoxideprimer etc. all completeasperspecification and direction of E/I.(c) 510mm Long with 10 litre low level P.V.C. cisternDSR3.2.1 (B) |
| 32 | Supplying fitting and fixing 40mmhigh vitreous white glazed earthen E.W.C. With \"P\" trapofparryhindustanor anyother approved I.S.S.Make includingsupplyingand fixing 15 litres C.I. Mosquito proof lowdown flushing cistern of approved make with complete fittings With C.I. handleandR.S.orbracketwithtelescopeflushpipewithbrasscouplingandplumbers jointsspindlestopcockofapproved uality weight not less than 450grams 15mmP.V.C. alkathene pipe 45cm long with brass couplingat both end sandwhite /blackplastic solid state seal and leadof commander/cuckooorother I.S.S.makewithhingesorscrewsetc. paintingpipeandcisternetc.with2coatsofapproved pain over a coat of red oxide priming all complete as per specification and direction of E/I. (ii)E.W.C. With \"S\" trap (b) 10 lit. Low level PVC Cistern DSR 3.2.2 |
| 33 | Supplying,fittingandfixingflatbackorangular, lippedfrontvitreouswhiteglazedearthenwareurinal of Hindustan\"Parry\" or anyother approved I.S.S.Makewith5 literscapacityC.I.Automatic fulsingcisternof reliance for anyother I.S.S.approvedmakewithall fittingswithC.I.orR.S.bracket, standardsizeG.I. flushpipewith fittingclamps,15mmC.I. body brass spindle stop cock of approvedquality weight not less than 400grams, 15mmP.V.C./Alkthenepipe450mmlongwithbrass couplingatbothendsanddoingplumber joints includingpaintingofexposed part with two coats of approved paint over aprimingcoat of redoxide, cuttingwall and floor,makinggoodthesameetc.all completeasperspecificationanddirection of E/I. DSR 3.2.3 |
| 34 | Supplying, fittingandfittingvitreouswhiteglazedearthenwarewashhandbasinofParryorHindustanoranyotherI.S.S. approvedmakesupportedonpointedC.I. orM.S.brackets32mC.I.brasswaste,15mmdiaC.I.bodybrassspindlestopcockof approvedqualityofweight not lessthan350grams, 32mmP.V.C.wastepipe750mmlongwithbrasscouplingatoneendandmakingplumber jointsetc. all complete as per specification and direction of E/I.DSR 2084.36 |
| 35 | ProvidingandfixingGunmetal fullwayvalveofapproved quality, all complete as per specification and direction of E/I.20mm dia.DSR 5.3.12 |
| 36 | ProvidingandfixingGunmetal fullwayvalveofapproved quality, all complete as per specification and direction of E/I.25mm dia.DSR 5.3.12 |
| 37 | ProvidingandfixingGunmetal fullwayvalveofapproved quality, all complete as per specification and direction of E/I.32 mm dia.DSR 5.3.12 |
| 38 | Providingandfixingmaleended15mmdiabrassbibcockofapprovedquality(wt.not lessthan350grams)withextrasocket all complete as per specification and direction of E/I.DSR 3.1.5.1 |
| 39 | Providingand fixingC.P. brass long body bib cock of approved quality conformingtoISstandardsandweighingnot less than 690 gms.15 mm nominal bore D.S.R. 18.51.1 |
| 40 | Supplying, fittingand fixing the following itemswith all materials as per specification and direction of E/I. Mirrors of 6mm thick plateglass bevellededgemirror including C.P. brass revolving fitting, 3mm plywood board and C.P. hinges to fix with mirror, 450 x 300mm size DSR 3.1.21 (b) (ii) |
| 41 | ProvidingandfixingunplasticisedP.V.C. connectionpipe with PTMT Nuts ,collarandbushofapprovedqualityandcolour.15 mm nominal bore with 45cm length D.S.R. 18.74.2 |
| 42 | Providing and fixing onwall face unplasticised- PVCmoulded fittings /accessories for unplasticisedRigidPVC rain wate rpipes conforming toIS:13592TypeA, including jointingwithseal ringconformingtoIS:5382, leaving10 mm gap for thermal expansion.Coupler 110 mmD.S.R.12.42.1.2 |
| 43 | Providing and fixing onwall face unplasticised- PVCmoulded fittings /accessories for unplasticisedRigidPVC rain wate rpipes conforming toIS:13592TypeA, including jointingwithseal ringconformingtoIS:5382, leaving10 mm gap for thermal expansion.Single tee with door - 110 x 110 x 110mm D.S.R.12.42.3.2 |
| 44 | Providing and fixing onwall face unplasticised- PVCmoulded fittings /accessories for unplasticisedRigidPVC rain wate rpipes conforming toIS:13592TypeA, including jointingwithseal ringconformingtoIS:5382, leaving10 mm gap for thermal expansion.110mm Bend 87.5°D.S.R.12.42.5.2 |
| 45 | Providing and fixing onwall face unplasticised- PVCmoulded fittings /accessories for unplasticisedRigidPVC rain wate rpipes conforming toIS:13592TypeA, including jointingwithseal ringconformingtoIS:5382, leaving10 mm gap for thermal expansion.Shoe .S.R.12.42.6.2 |
| 46 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes, having thermal stabilityforhot&coldwatersupply,including all CPVC plain & brassthreadedfittings, i/cfixing thepipewith clamps at 1.00mspacing. This includes jointingof pipes& fittingswithonestepCPVCsolventcement and thecost of cuttingchasesandmakinggood the same including testing of joints complete as per direction of Engineer in Charge.Concealedwork, including cutting chases andmaking good the walls etc.15mm nominal dia Pipes DSR 18.8.1 |
| 47 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes, having thermal stabilityforhot&coldwatersupply,including all CPVC plain & brassthreadedfittings, i/cfixing thepipewith clamps at 1.00mspacing. This includes jointingof pipes& fittingswithonestepCPVCsolventcement and thecost of cuttingchasesandmakinggood the same including testing of joints complete as per direction of Engineer in Charge.Concealedwork, including cutting chases andmaking good the walls etc. 20mm nominal dia Pipes DSR 18.8.2 |
| 48 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes, having thermal stabilityforhot&coldwatersupply,including all CPVC plain & brassthreadedfittings, i/cfixing thepipewith clamps at 1.00mspacing. This includes jointingof pipes& fittingswithonestepCPVCsolventcement and thecost of cuttingchasesandmakinggood the same including testing of joints complete as per direction of Engineer in Charge.Concealedwork, including cutting chases andmaking good the walls etc.32mm nominal dia Pipes DSR 18.8.4 |
| 49 | Supplying materials and labours for construction of inspection chamber of designation class75Bbrick size 750mm deco, 650x450mm internal dimension having 250mmall thickness incementplaster (1:4)withpunningon insideandcement plaster (1:6)with600x475mmG.I.coverwithframe(weightnot less than36kg.)alongwith earthwork inexcavationandrefillingall completeasper specification and direction of E/I.DSR 3.3.8 |
| 50 | Supplying materials and labours for construction of inspection chamber of designation class75Bbrick size 750mm deco, 650x450mm internal dimension having 250mmall thickness incementplaster (1:4)withpunningon insideandcement plaster (1:6)with600x475mmG.I.coverwithframe(weightnot less than36kg.)alongwith earthwork inexcavationandrefillingall completeasper specification and direction of E/I.DSR 3.3.8 M-961.III Bib Cock ISI |
| 51 | Supplying materials and labours for construction of inspection chamber of designation class75Bbrick size 750mm deco, 650x450mm internal dimension having 250mmall thickness incementplaster (1:4)withpunningon insideandcement plaster (1:6)with600x475mmG.I.coverwithframe(weightnot less than36kg.)alongwith earthwork inexcavationandrefillingall completeasper specification and direction of E/I.DSR 3.3.8 M-961.XXI Towel Rail 24\" |
| 52 | Supplying materials and labours for construction of inspection chamber of designation class75Bbrick size 750mm deco, 650x450mm internal dimension having 250mmall thickness incementplaster (1:4)withpunningon insideandcement plaster (1:6)with600x475mmG.I.coverwithframe(weightnot less than36kg.)alongwith earthwork inexcavationandrefillingall completeasper specification and direction of E/I.DSR 3.3.8 M-961.XXIII Soap desk |
| 53 | Supplying materials and labours for construction of inspection chamber of designation class75Bbrick size 750mm deco, 650x450mm internal dimension having 250mmall thickness incementplaster (1:4)withpunningon insideandcement plaster (1:6)with600x475mmG.I.coverwithframe(weightnot less than36kg.)alongwith earthwork inexcavationandrefillingall completeasper specification and direction of E/I.DSR 3.3.8 M-960 (v) Supplying and fixing 100mm (4\") steel jali |
| 54 | Providing and placing on terrace (at all floor levels) (PVC)Polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR Page -31 Item- M 079(1000 Ltr) |
| 55 | Wiringfor lightpoint/ fanpoint/exhaust fanpoint/callbell point with 1.5sq. mmFRPVCinsulatedcopperconductor singlecorecableinsurface/ recessedmediumclassPVC conduit,withpianotypeswitch,phenolic laminatedsheet,suitable sizeM.S. box and earthing the point with 1.5sq.mm. FRPVC insulatedcopper conductor singlecore cable etc as required. Group-A 1.1.1 |
| 56 | Wiringfor lightpoint/ fanpoint/exhaust fanpoint/callbell point with 1.5sq. mmFRPVCinsulatedcopperconductor singlecorecableinsurface/ recessedmediumclassPVC conduit,withpianotypeswitch,phenolic laminatedsheet,suitable sizeM.S. box and earthing the point with 1.5sq.mm. FRPVC insulatedcopper conductor singlecore cable etc as required. Group-B 1.1.2 |
| 57 | Wiringforcircuit/submainwiringalongwithearthwirewiththefollowingsizesofFRPVCinsulatedcopperconductor,single corecable in surface/ recessed steel conduit as required.2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire 1.7.1. |
| 58 | Wiringforcircuit/submainwiringalongwithearthwirewiththefollowingsizesofFRPVCinsulatedcopperconductor,single corecable in surface/ recessed steel conduit as required.2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire 1.7.2. |
| 59 | Supplying and fixing of following sizes PVC conduitalong with accessories in surface/recess including cutting the wall andmaking good the same in case of recessed conduit as required.25mm PVC conduit 1.21.2 |
| 60 | Supplying and fixing of following sizes PVC conduitalong with accessories in surface/recess including cutting the wall andmaking good the same in case of recessed conduit as required.32mm PVC conduit 1.21.3 |
| 61 | Supplying and fixing metal box of following sizes (nominalsize)on surfaceor inrecesswithsuitablesizeofphenoliclaminatedsheet cover in front includingpaintingetcas required.72mm x 146mm x 48mm 1.22.2 |
| 62 | Supplying and fixing metal box of following sizes (nominalsize)on surfaceor inrecesswithsuitablesizeofphenoliclaminatedsheet cover in front includingpaintingetcas required.121mm x 173mm x 48mm 1.22.2 |
| 63 | Supplyingandfixingfollowingpianotypeswitch/socketontheexistingswitchbox/cover includingconnectionsetc.as required.5/6 amp switch 1.23.1 |
| 64 | Bulk head fitting with 9/10 wall CFL/LED M-869 |
| 65 | Providing and fixing 1200mm Ceiling fan |
| 66 | 3 pin 5/6 amp socket outlet 1.24.4 |
| 67 | Cost of drilling200mmx165mmx100mdeepborewell inallkindsofsoilandrockinruralareafor installationofpumpsetwithD.T.H. rigall complete! includingsupplyingallmaterials, labours,tools, drillingrig, air compressorandequipment aswell as fuel,lubricants formakingboringandcostof transporting/chargesofrig machine & other vehicles up to site of the work as per specification and direction of E/l.(M1035 : DW&S) (a) Up to 50 mtr Below G.L |
| 68 | Supplyingallmaterials, labours,equipments for lowering200mm diaM.S.ERSpipesascasingofwell thickness6mmforprotecting thesites fromfallingduring theprocessof drillingail complete including carriage to work site. (M1036 : DW&S) |
| 69 | Supplyinglabourandequipmentsincluding200mmdia.M.S.Capandfittingandfixingover thetubewell properlyandtakingitout as per direction of E/I. (M1036 : DW&S) |
| 70 | Supplyingall tools, labours, equipments for lowering32mmdia P.V.C .pipein3mtr. lengthinthedrillingboreof tubewelletc.all complete job as per direction of E/I. D.S.R. 18.9.4 |
| 71 | Developmentof tubewell inaccordancewithIS:2800(part I)andIS:11189, toestablishmaximumrateofusablewateryieldwithoutsandcontent (beyondpermissiblelimit),withrequiredcapacityaircompressor, all asper requirement anddirectionofEngineer-incharge.(M1042 : DW&S) |
| 72 | Supplying fittingand fixingof KSB/KIRLOSKER/CRImake1.50HPSubmersiblepumpsethavingheadof135metreincludingalltaxes, royalty, etc.all complete job as per direction of E/I.(M1055 : DW&S) |
| 73 | Supplyingfittingandfixingof5H.P.standardmakestarterpanelboardwitharrangement of all necessaryprotection includingalltaxes,royalty etc all comlete job as per direction of E/I.(M1065 : DW&S) |
| 74 | Supplyingfittingandfixing3core4mm2flat coppersubmersiblecableFINOLEX/HAVELSmake includingall taxes,royaltyetcallcomplete job as per direction of E/I.(M1906 : Energy) |
| 75 | Providing and applying white cement based putty of 1 mm thickness of approved brand and manufacturer over plastered surface to prepare the surface even and smooth complete.DSR 13.80 |
| 76 | Finishingwallswithpremiumacrylicsmoothexterior paint with silicone additives of required shade Newwork (twoormorecoats [email protected] ltr/10sqm)[email protected]/10sqm allcompleteasperbuildingspecification and direction of E/I.13.47.1 |
| 77 | Providing two coats of Oil bound distemper on old surface including repairing the plasteredsurfacesmooth with sand paper , scaffolding, curing and taxes all complete as per building specification and direction of E/I.5.8.17 |
| 78 | Providing two coats of synthetic enamel paint of approved shade and makeover steel surface including cleaning the surface thoroughly, scaffoldingand taxes all complete as per building specification and direction of E/l. 5.8.45 |
| 79 | Providingand laying vitrified floor tiles indifferent sizes (thickness to be specified by themanufacturer) with water absorption less than0.08%andconforming to IS : 15622, of approvedmake, inall colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4coarsesand), includinggroutingthe joints with white cement and matching pigments etc., complete.600 mm x 600 mm11.41.1DSR |
| 80 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.5.14 |
| 81 | Structural steel work in single section fixed with or without connecting plateincluding cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete 5.5.35 |
| 82 | Providing Tor steel reinforcement of 10 mm, 12 mm and 16 mm dia bars as per approved design and drawing excluding carriage of bars to work site, C/B/B with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. 5.5.5 |
| 83 | Providing and fixing Stainless Steel AISI304(18/8)kitchen sink as per IS:13983withC.I. brackets and stainless steel plug 40mm ,including painting of fitting sand brackets,cutting and making goodthewallswherever required :Kitchen sinkwithout drainboard,610x510 mm bowl depth 200 mm.D.S.R. Item No. 17.10.2.2 |
| 84 | Provign and fixing C.P barass bib cock of approved quality conforming to IS8931,15mmdianominalboreofapprovedbrand C.P. Fitting DSR 18.49.1 |
| 85 | ProvingandfixingPTMTextensionnipple15mmsizewith12\"BSP thered70mmlength abd300bredth andweighingnot less than 18gms of approved make. DSR 18.75.1 |
| 86 | Supplying, fittinggummetal fullwayvalueofapprovedqualityallcomplete as per specificationanddirectionofE/I 15mmdia 3.1.12 |
| 87 | Providingand fixingonwall faceunplasticisedRigidPVCpipes conforming toIS:13592TypeA, includingjointingwithseal ringconforming toIS:5382, leaving10mm gap for thermal expansion,(i) Single socketed pipes D.S.R. 12.41.2 |
| 88 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.D.S.R. Item No. 18.8 20mm dia |
| 89 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.D.S.R. Item No.18.9 32mm dia |
| 90 | CostofDrilind200mmx165mmx125mtr.deepborewell in all kind of Soil androckinruralareaforinstalationofpump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig, air compressure and equipments as well as fule, lubricants and cost oftransportation of rig machine annd other vehical up to Site.PHED Page no-115 Item no.119 M 1035 Part A From 0.00 M to 50.00 M below G.L. |
| 91 | CostofDrilind200mmx165mmx125mtr.deepborewell in all kind of Soil androckinruralareaforinstalationofpump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig, air compressure and equipments as well as fule, lubricants and cost oftransportation of rig machine annd other vehical up to Site.PHED Page no-115 Item no.119 M 1035 Part A From 51.00 M to 125.00 M below G.L. |
| 92 | Supplying, assembling, lowering and fixing in vertical position inbore well, unplasticized PVCmediumwell casing (CM) pipe of required dia, conformingtoIS:12818,including required hire and labour charges, fittings & accessoriesetc. allcomplete, foralldepths, asperdirection of Engineer -in-charge. 200 mm nominal size dia DSR 23.3.3 |
| 93 | Development of tubewell in accordance with IS:2800(partI)and IS:11189,to establish maximum rate of usable water yield without sand content (beyondpermissible limit),withrequired capacity aircompressor, running the compressor for required time till well is fully developed,measuring yield of well by \"V\" notchmethodor anyother approved method,measuring static level &draw down etc.by step draw down method,collecting water samples &getting tested in approved laboratory, i/c disinfection of tubewell, allcomplete,includinghire&labourchargesofaircompressor,tools & accessoriesetc., all asper requirement anddirection of Engineer-in-charge DSR 23.12 |
| 94 | Supplying and commissionig of submersible pump set conforming to IS8034andmotor conforming to IS9283 should be suitable for various head and discharge with stainless steel pump soft and polypyenen-do-do- all complete job as per specification and direction of E/I .100 MM dia 1.5 HP Pump (sl. 139 M 1055, PG- 124 Part A) (sl. 139 M 1055, PG- 124 Part A) |
| 95 | providing and fixing M.S clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800(part I)including necessary bolts & nuts of required size complete 200 mm clamp DSR 23.14.2 |
| 96 | Supplying fitting and fizing3 crore 4 sqmmflat copper submemersible cable Finolex/Hevel smake including alltaxes royality etc. al complete job as per direction of E/I M1627 PG- 36 Energy Dptt. |
| 97 | Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clampsat1.00mspacing.Thisincludes jointing of pipes&fittingswith one stepCPVC solvent cement and testingof joints complete as per directionof Engineer in Charge. 40mm nominal outer dia pipe DSR 18.8.4 |
| 98 | Supplying fitting of standard make starter pannel board with arrangement of aanecessaryprotection inlcudingall taxes royalty etc all complete job as per direction of E/I Supply PHED Pg. No.134 Item No 149 m1065 |
| 99 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, includingallCPVCplain&brassthreadedfittings, includingfixing DSR18.7.5 |
| 100 | Cost of drilling 200mm x 165mm x 100m deep borewell in all kind softsoil and rockinruralareafor installationofpumpsetwith D.T.H. rigall complete! includingsupplyingallmaterials, labours, tools, drillingrig, air compressor and equipment as well as fuel,lubricantsformakingboringandcostof transporting/chargesofrig machine & other vehicles up to site of the work as per specification and direction of E/l.(M1035 : DW&S) |
| 101 | Supplyingallmaterials, labours,equipments for lowering200mmdiaM.S.ERSpipesascasingofwell thickness6mmforprotecting the sites fromfallingduring theprocessof drillingail complete including carriage to work site. (M1036 : DW&S) |
| 102 | Supplyinglabourandequipmentsincluding200mmdia.M.S.Capandfittingandfixingover thetubewell properlyandtakingitout as per direction of E/I. (M1036 : DW&S) |
| 103 | Supplyingall tools, labours, equipments for lowering 32mm diaP.V.C.pipe in 3mtr. Length in thedrilling bore of tube well etc.all complete job as per direction of E/I. D.S.R. 18.9.4 |
| 104 | Development of tube well in accordance with IS:2800 (part I) andIS:11189, toestablish maximum rate of usable water yield withoutsand content (beyond permissible limit),wit hrequired capacity aircompressor, all asper requirement and direction of Engineer-incharge. (M1042 : DW&S) |
| 105 | Supplying fittingand fixing of KSB/KIRLOSKER/CRI make1.50HPSubmersible pump set having head of 135 metre including alltaxes, royalty, etc.all complete job as per direction of E/I.(M1055 : DW&S) |
| 106 | Supplying fitting and fixing of 5H.P.standard make starter panelboard with arrangement of all necessary protection including alltaxes,royalty etc all comlete job as per direction of E/I.(M1065 : DW&S) |
| 107 | Supplying fitting and fixing 3core 4mm2 flat copper submersiblecable FINOLEX/HAVELS make including all taxes,royaltyetcallcomplete job as per direction of E/I.(M1906 : Energy) |
| 108 | Carriage of MaterialCement |
| 109 | stone chips |
| 110 | bricks |
| 111 | steel |
| 112 | Goods & Service Tax (G.S.T.) - 18% |
| 113 | Labour Cess - 1% Please Enable Macros to View BoQ information |
