|
| 1 | Repair of under mentioned furniture items will be carried out as follows:-(a)Removal ofexisting unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints.(b)Work will be executed where the furniture exist in different User Units/Md accns of GE (West) Prayagraj /Chheoki including BSO Furniture Yard as directed by Engineer-in-Charge.(c)All Timber shall be of 1st class seasoned hard teak wood free from knots and cracks else specified in drg.(d)Anti-termite and anti-bug treatment shall be done before polishing the wooden items.(e)Scrapping/Grinding will be carried out for renewal of existing dust, dirt, faded polish etc strictly as directed by GE/EIC, M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanshipas directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda whereverrequiredbefore polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. |
| 2 | Chair Dining, FD-279 or any type |
| 3 | Rear legs as per drawing. |
| 4 | Front Leg as per drawing. |
| 5 | Seating Frame members front, back sides as per drawing. |
| 6 | Bottom/Centre stiffener as per drawing. |
| 7 | Back strip as per drawing. |
| 8 | M&L for Re-canning of chair shall be done as per Godrej pattern with 2 mm approved quality of plastic cane and holes to be covered by 3.5mm-4mm wide half round cane. Make of Cane: Shah Brand. |
| 9 | Chair Easy, FD-229 or any type. |
| 10 | Rear legs as per drawing.. |
| 11 | Front Leg as per drawing. |
| 12 | Seating/back Frame members front, back,side rail as per drawing. |
| 13 | Arm rest as per drawing. |
| 14 | Re-canning Seat: All as per item No (2.06) above but Chair Easy. |
| 15 | Re-canningBack.All as per item No (2.06) above but Chair Easy. |
| 16 | Chhair Writing, FD-280 or any type |
| 17 | Rear legs as per drawing. |
| 18 | Front Leg as per drawing. |
| 19 | Seating Frame members front, back sides as per drawing. |
| 20 | Bottom/Centre stiffener as per drawing. |
| 21 | Arm rest as per drawing. |
| 22 | Back strip as per drawing. |
| 23 | Re-canning : All as per item No (2.06) above but Chair Writing. |
| 24 | Chair Vrandah, FD/MAP-19M,256,359,259,FD/MAP-II/06 or any type |
| 25 | Conduit section any member of MS conduit pipe 16G, 19/20mm dia as per drawing. |
| 26 | Welding joints of leg of 19/20mm MS tube & other jointsas per drg as directed by EIC. |
| 27 | M&L for Re-canning of chair shall be done as per Mate pattern with 4 mm approved quality of plastic cane. Make of Cane: Shah Brand. |
| 28 | Removal of old paint by scrapping and prepration of surface smooth by a coat of red oxide peimer applying putty and two coats of paint 1st quality of approved shade over a coat of red oxide primer all as per specification. |
| 29 | S&F stiffner of size 12 mm square pipe 18Gx16\" with appropriate MS plateduly painted shall be provided below the seat of chairs complete as directed by EIC. |
| 30 | S&F PVC Seat & back as per drawing. |
| 31 | Chair Computer/ Revolving, FD/E6/MAP/01,TP or any type |
| 32 | Seat shall be made of moulded polyurethane foam with 40 density (Make:Sleepwell (Primo cool)/Godrej/ Komfort Universe (Polycool) pasted with adhesive on 12mmthick moulded plywood covered with tapestry cloth sample held in BSO Yard (Colour and shade to be approved by GE) of cost not less than Rs. 350/- per RM. |
| 33 | Back Seat - all asabove butback complete. |
| 34 | PU armsall as directed by EIC. |
| 35 | Complete pedestrailassy std quality (As per Sample) complete all as directed by EIC. |
| 36 | Supply and fixing new twin wheel castors of required dia complete all as directed by EIC. |
| 37 | Supply & fix new chrome free cylinder tube shall be fixed complete all as directed by EIC. |
| 38 | Locking lever assembely and Supply & fix new all as directed by EIC. |
| 39 | Removal of old paint by scrapping and prepration of surface smooth by a coat of red oxide peimer applying putty and two coats of paint 1st quality of approved shade over a coat of red oxide primer all as per specification. |
| 40 | Chair Easy Cushioned, FD-358 or any type |
| 41 | Rear legs as per drawing. |
| 42 | Front Leg as per drawing. |
| 43 | Arm rest as per drawing. |
| 44 | Seating Frame members front, back sides as per drawing. |
| 45 | Seatshall be made out of 75mm thick polyurethane foam with 40 density (Make:Sleepwell (Primo cool)/Godrej/ Komfort Universe (Polycool) pasted with adhesive on 12mmthick BWR Grade plywood covered with tapestry cloth sample held in BSO Yard (Colour and shade to be approved by GE) of cost not less than Rs. 550/- per RM. |
| 46 | Back shall be made out of 75mm thick polyurethane foam with 40 density (Make:Sleepwell (Primo cool)/Godrej/ Komfort Universe (Polycool) pasted with adhesive on 12mmthick BWR Grade plywood covered with tapestry cloth sample held in BSO Yard (Colour and shade to be approved by GE) of cost not less than Rs. 550/- per RM. |
| 47 | Chair dining officers, FD/MAP-II/04 or any type |
| 48 | Rear legs as per drawing. |
| 49 | Front Leg as per drawing. |
| 50 | Seating Frame members front, back sides as per drawing. |
| 51 | Bottom/Centre stiffener as per drawing. |
| 52 | Back strip as per drawing. |
| 53 | Replacement of us plywood for seat with polyurethane foam with 40 density (Make:Sleepwell (Primo cool)/Godrej/ Komfort Universe (Polycool) pasted with adhesive on 12mmthick BWR Grade plywood covered with tapestry cloth sample held in BSO Yard (Colour and shade to be approved by GE) of cost not less than Rs. 550/- per RM. |
| 54 | Table 3\"X2\" with / without Drawer, FD-55/284/283or any type |
| 55 | Top of size 3\"X2\" made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging all round of Make-Rehau/Pegasus/Kynex with edge bander and autolipped throughfeed CNC machine shall be fixed ,rest all as per drawing. |
| 56 | Legs as per drawing. |
| 57 | Long rail as per drawing. |
| 58 | Short rail as per drawing. |
| 59 | CenterStiffener as directed by EIC. |
| 60 | Short stiffener as per drawing. |
| 61 | Drawer made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg. sides/back shall be of 18 mm thick18 mm thick Prelaminated HDHMR board and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 5\"\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 62 | Fancy Knob CP as per sample held in yard. |
| 63 | Wooden corners to be provided all as directed by EIC/GE. |
| 64 | Table 3\"X3\", FD- 88& 291 or any type |
| 65 | Top shall be 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg. |
| 66 | Legs as per drawing. |
| 67 | Long rail as per drawing. |
| 68 | Short rail as per drawing. |
| 69 | CenterStiffener as directed by EIC. |
| 70 | Short stiffener as per drg |
| 71 | Table Dining 4/6/8 Persons, FD-273, 30 or any type/MAP Drg |
| 72 | Top size for 04 Pers made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing. |
| 73 | All asitem No. 11 (a) butsize for 06 Pers. |
| 74 | All asitem No. 11 (a) butsize for 08 Pers. |
| 75 | Wooden corners to be provided all as directed by EIC/GE. |
| 76 | Longrail for 4 personas per drawing |
| 77 | Longrail for 6/8 personas per drawing |
| 78 | Short rail for 4 person as per drawing |
| 79 | Short rail for 6/8 person as per drawing |
| 80 | Legs 4/6/8 person as per drawing |
| 81 | Stiffener between long rails as per drawing |
| 82 | Table writing, FD-33,275, DB-3982or any type |
| 83 | Top made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg. |
| 84 | Legs as per drawing |
| 85 | Foot rest as per drawing |
| 86 | Stiffener side as per drawing |
| 87 | Cabinet box with vertical and horizontal partitionswith 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete. Back ply shall be 12 mm BWR grade. |
| 88 | Top and bottom for cabinet boxwith 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing |
| 89 | Sides for cabinet boxwith 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing |
| 90 | Cabinet door made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg. Lock(Make: Hettich/Ebco/Quba) and CP Handle 5\"\" (Make: Hettich/Ebco/Quba) be provided in Cabinet all as directed by GE/EIC and as per drawing |
| 91 | Back ply BWR gradeas per drawing |
| 92 | Drawer made of18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau /Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete in front, sides/back shall be of 18 mm thick Prelaminated HDHMR and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/ Quba/ Klazovyn) and CP Handle 5\"\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 93 | 12 mm thick back ply BWR grade of table dressing box as per drg. |
| 94 | Table Dressing Ladies with Stool, FD/E6/MAP/07 or any type |
| 95 | Cabinet box with partitions with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. Back ply shall be 12 mm BWR grade as per drawing |
| 96 | Top and Bottom with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per ddrawing |
| 97 | Shutter with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drawing |
| 98 | Sides with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drawing |
| 99 | Drawer made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround completein front, sides/back shall be of 18 mm thick Prelaminated HDHMR and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 5\"\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 100 | Frame assembly along with Mirrorr 5mm thick (Make-Modiguard/ Atul/ Saintgobbain) & 6 mm thick Back ply BWR grade as per drg. |
| 101 | Cushion complete with 40 dennsityPU foam(Make:Sleepwell/ (Primocool)/Komfort Universe (Poly Cool).)with upholstery of tapestry clothof range not less than Rs. 550/mtr (Sample kept with BSO as approvedcolur, shade & quality as approved byEIC/GE. as per drg. |
| 102 | 12 mm thick back ply BWR grade of table dressing box as per drg. |
| 103 | Cabinet boxfor stool dressing with18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 104 | Repair of Stool dressing and S&F PU foam cushion with 40 Density(Make:Sleepwell/ (Primocool)/Komfort Universe (Poly Cool).) with Tapestry cloth as approved by EIC/GE of rate not less than Rs 550/RMcomplete as per drawing and as directed by EIC. |
| 105 | Heavy duty Revolving Nylon double wheels as per drawing |
| 106 | Peg Table, FD-277/ 384, DB-3973 or any type. |
| 107 | Top made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing |
| 108 | Legs as per drawing |
| 109 | Top rail/Bottom Rail rail as per drg irrespective of drawing |
| 110 | Top short railto be provided irrespective of drawing |
| 111 | stiffener between bottom rail to be provided irrespective of drawing |
| 112 | Table Centre Wooden/ Glass top FD-274 / 235 or any type |
| 113 | Top made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg. |
| 114 | Table top10/12mm glass colour and shade as per directed by GE/EIC as per drawingMake : Modiguard/Saint Gobbin/Atul |
| 115 | Polishing ,welding and vacume allas per directed by GE/EIC. |
| 116 | Best quality Shoe of 25 mm dia as per sample held in BSO Yard. |
| 117 | Legsas per drawing |
| 118 | Top rail/stiffener as per drawing |
| 119 | Bottom rail as per drawing |
| 120 | Top short railto be provided irrespective of drawing |
| 121 | Stiffener between bottom rail to be provided irrespective of drg. |
| 122 | Wooden corners to be provided all as directed by EIC/GE irrespective of drg. |
| 123 | PVC shoes/Ring as directed by GE. |
| 124 | Side Board, FD-26/241 or any type |
| 125 | Cabinet box complete with vertical and horizental partitions made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. Back ply shall be 12 mm BWR grade as per drawing |
| 126 | Top and bottom for Cabinet box with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete |
| 127 | Sides for cabinet box with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete all as per drawing |
| 128 | Drawer made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete in front, sides/back shall be of 18 mm thick Prelaminated HDHMR and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 5\"\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 129 | Cabinet door/Shutters made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete. SS Piano higes shall be used for fixing. Lock(Make: Hettich/Ebco/Quba/ Klazovyn) and CP Handle 5\"\" (Make: Hettich/Ebco/Quba) be provided in Cabinet all as directed by GE/EIC and as per drawing |
| 130 | Base Frame structure to be made complete with 25mm dia PVC shoeall as specified and as per drawing |
| 131 | Teapoy, FD-278, 34, 382 or any type |
| 132 | Top made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing |
| 133 | Legsas per drawing |
| 134 | Top rail/stiffener as per drawing |
| 135 | Bottom rail as per drawing |
| 136 | Top short railto be provided irrespective of drawing |
| 137 | Stiffener between bottom rail to be provided irrespective of drawing |
| 138 | Wooden corners to be provided all as directed by EIC/GE irrespective of drg. |
| 139 | Bin Linen Multipurpose, FD/E6/MAP/09 or any type |
| 140 | Cabinet box complete with vertical and horizental partitions made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. Back ply shall be 12 mm BWR grade as per drawing |
| 141 | Top and bottom for Cabinet box with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete |
| 142 | Sides for cabinet box with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete all as per drawing |
| 143 | Cabinet door made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete. SS Piano higes shall be used for fixing. Lock(Make: Hettich/Ebco/Quba) and CP Handle 5\"\" (Make: Hettich/Ebco/Quba) be provided in Cabinet all as directed by GE/EIC and as per drawing |
| 144 | Drawer made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete in front, sides/back shall be of 18 mm thick Prelaminated HDHMR and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 5\"\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 145 | Base Frame structure to be made completeall as specified and as per drawing |
| 146 | Fancy Knob SS CP as per sample held in yard. |
| 147 | PVC shoe as per sample. |
| 148 | Hat Stand with Mirror Small / Large, FD- 233or any type |
| 149 | In main frame structure, 18 mm thick Plain HDHMR board over which pasting of teak face ply 4mm thick, shade approvedby EIC/GE with suitable adhesive and all around teak wood beadingduly polishedandfixed with headless nails and adhesive all as directed by GE/EIC and as per drawing |
| 150 | Brass Pegs as per sample held with BSO. |
| 151 | Loocking Glass 5mm thickduly polished and fixed as per drawing.Make : Modiguard/Saint Gobbin/Atul |
| 152 | Hanginig Arrangement , 02 Nos MS hangining arrangement to beprovided in Hat Standall as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all matel surfaces . |
| 153 | (a)Anti-termite and anti-bug treatment shall be done before polishing the wooden items.b)M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanshipas directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda whereverrequiredbefore polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. c) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE(West) Allahabad including BSO\"s Furniture Yard as directed by Engineer-in-Charge. |
| 154 | Chair Dining |
| 155 | Chair Easy |
| 156 | Chair Writing |
| 157 | Chair Easy Cushioned |
| 158 | Chairs Dining Officers |
| 159 | Table 3\"X2\"with / without Drawer FD-55/284/283 or simillar |
| 160 | Table 3\"X3\" FD- 291 |
| 161 | Table Dining 4/6/8 Persons :FD-273, 30 or similar type |
| 162 | Table writing FD-33,275, DB-3982 or similar type |
| 163 | Table Dressing Ladies FD-32,251, DB-3180 |
| 164 | Table Centre FD-274 / 235 |
| 165 | Side Board FD-26/241 |
| 166 | Teapoy FD-278, 34, 382 |
| 167 | Peg Table FD-276/248 FD-277/ 384, DB-3973 |
| 168 | Bin Linen Multipurpose FD/E6/MAP/09 |
| 169 | Almirah Large Steel, FD-67 / 1031/ TP/MAPor any type |
| 170 | Steel 6 lever locks Make : Godrej/Link/EBCO) as per drawing |
| 171 | Inside 6 Steel lever locks (Make : Godrej/Link/EBCO) for 1/2H 1/2S Almirah as per drawing |
| 172 | Marooti lock as per sample and directed by GE/EIC |
| 173 | CP Handle as per drawing |
| 174 | CP Handle for 1/2H 1/2S Almirah as per drawing |
| 175 | Legs as per drawing |
| 176 | Repairs to door as specified including replacement of hinges. |
| 177 | Repair/adjustment to existing shelf including welding as per drawing |
| 178 | Shutter as per drawing |
| 179 | Shelf as per drawing |
| 180 | Locking arrangement complete including MS bar. |
| 181 | Welding wherever required asdirected by GE/EIC |
| 182 | Almirah Medium / Small Steel, FD-1032/FD-104(m)or any type |
| 183 | Steel 6 lever locks.Make : Godrej/Link/EBCO) as per drawing |
| 184 | CP Handle as per drawing |
| 185 | Legs as per drawing |
| 186 | Repairs to door as specified including replacement of hinges |
| 187 | Repair/adjustment to existing shelf including welding as per drawing |
| 188 | Shutter as per drawing |
| 189 | Shelf as per drawing |
| 190 | Locking arrangement complete including MS bar. |
| 191 | Welding wherever required asdirected by E-in-Incharge |
| 192 | Teapoy Verandah, FD-383/255/MAP or any type |
| 193 | Rubber shoe std quality as per drawing |
| 194 | Top made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing |
| 195 | Flat iron/conduit section any member as per drawing |
| 196 | Table 3\"x2\" with and w/o drawer & Table 3\"x3\", FD-1008/1007/1009 or any type |
| 197 | Welding wherever required asdirected by E-in-charge |
| 198 | Top 18 mm thick of size 3\"x2\" made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing |
| 199 | Top 18 mm thick of size 3\"x3\" made outof 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing |
| 200 | Repairs to Drawer by replacing old u/s parts with new parts and providing roller bearing including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. |
| 201 | Rubber shoe std qualityas per drawing |
| 202 | Lock of drawer as per drawing.Make : Godrej/Link/EBCO. |
| 203 | MS section any member as per drawing. |
| 204 | Locker Steel, FD-1029/257/SKD-562 or any type |
| 205 | CP handelsas per drawing |
| 206 | S/S Hasp & Staple ,restas per drawing |
| 207 | Repairs to doorincluding replacement of hinges |
| 208 | Shutter/door as per drawing |
| 209 | Legs as per drawing |
| 210 | CP Conduit pipe as per drawing |
| 211 | Shelf as per drawing |
| 212 | Steel 6 lever locks (Make : Godrej/Link/EBCO) as per drawing |
| 213 | Locking arrangement complete including MS bar. |
| 214 | Welding wherever required asdirected by E-in-charge. |
| 215 | Computer Table, FD/E6/MAP/12 or any type |
| 216 | Computer TableTop made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing |
| 217 | Key board tray shall be of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg., SS Nut & Bolts shallbe used for fixing the top as directed by GE/EIC. |
| 218 | Sides shall be 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg. with headless SS Nails and fevicol/ adhesive, SS Nut & Bolts shallbe used for fixing the top as directed by GE/EIC. |
| 219 | Drawer made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg., sides/back shall be of 18 mm thick Prelaminated HDHMR board and bottom of drawer shall be 9 mm thick BWR Plywood complete. all as directed by GE/EIC. |
| 220 | Mouse holdershall be made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing |
| 221 | Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 5\"\" as per sample held in BSO yard be provided in Drawers, mouse holder and Key board tray all as directed by GE/EIC. |
| 222 | All metal work shall be PU paint after applying metalic putty and preparation of surface smooth. |
| 223 | Adjustable PVC Shoes best quality |
| 224 | Welding wherever required asdirected by E-in-charge. |
| 225 | Shoe Rack steel, FD-1030 or any type |
| 226 | Replacement of worn out US pipe from the level of bottem gap & fixing of new pipe through welding to the hight fromground level gas welding all as specified on drg as directed by GE/EIC |
| 227 | MS bar mesh as shown on drg complete as specified and as directed. |
| 228 | Welding work as per directed by EIC/GE |
| 229 | Rack Six Tiers steel / Book self open large and any type of rack, FD-1038 |
| 230 | S&F Back of Racks as per drawing |
| 231 | S&F side of Rack as per drawing |
| 232 | S&F of Shelves as per drawing |
| 233 | Welding wherever required asdirected by E-in-charge |
| 234 | Book Case Steel or any type |
| 235 | Steel 6 lever locks(Make : Godrej/Link/EBCO)as per drawing |
| 236 | CP Handle as per drawing |
| 237 | Glass of shutter including fixing as per drawing |
| 238 | Repair/adjustment to existing shelf as per drawing |
| 239 | Shutter as per drawing |
| 240 | Shelf as per drawing |
| 241 | Welding wherever required asdirected by E-in-Incharge |
| 242 | Table Office Clerk Steel,FD-84 / 381 FD-1004 or any type |
| 243 | Legs, as per drawing. |
| 244 | Lock of drawer as per drawing.Make : Godrej/Link/EBCO. |
| 245 | Repairs to Draweras specified & as directed by Engr-in-Charge. |
| 246 | MS conduite any as per drawing. |
| 247 | PVC Shoes std quality all as per drawing. |
| 248 | Welding the joints of legs / square tube as per drawing. |
| 249 | Top 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing |
| 250 | Table Office Officer Steel, FD-84/1003or any type |
| 251 | Legs, as per drawing. |
| 252 | Lock of drawer as per drawingMake-GODREJ/HETTICH/LINK/RINOX. |
| 253 | Repairs to Draweras specified & as directed by Engr-in-Chg. |
| 254 | MS Steel members any as per drg |
| 255 | PVC Shoes std quality all as per drg |
| 256 | Welding the joints of legs / square tube as per drg |
| 257 | Top 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing. |
| 258 | Chair School with hard board,FD/E6/MAP/05 or any type |
| 259 | One piece seat and back (Make: Blowplast/Supreme) as per drg. |
| 260 | Hand board of chair made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drawing. |
| 261 | Base frame for fixing hand board. |
| 262 | Welding work wherever required as directed by EIC. |
| 263 | Chair Steel Padded, FD-75(M) or any type |
| 264 | M&L For Removal Of Unsv seat & Back of Chair, S&F of Seat And Back of Chair With New Seat made of moulded ply covered with 75mm PU foam and best quality tapestry cloth inrespective of what is shown on drg. The back shall be 12 mm thick moulded ply fixed to frame with screwand covered with 50 mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with weldiing to steel frame etc complete all as specified and directed. Note - The Tapestary cloth shall be of ranging between Rs 350 per Meter and as per sample approved by GE. |
| 265 | M&L for removal of UNSV arm rest of chair and S&F of new arm rest of black integral Skinpolyurethanere inforced with MS insert and shall be scrathch and weather resistant complete all as specified and directed. |
| 266 | S&F in replacement hard rubber shoes at the bottom of chair CB steel shown on drg complete all as specified and directed. |
| 267 | Welding of broken parts of Chair Steel with 25 mm round MS conduite pipe of 1.6 gauge as per existing shapes & size |
| 268 | CHAIR CB STEEL WITH/WITHOUT ARMSor any type |
| 269 | S&F 02 Nos MS Flat iron 40mmX3mm thick of required lenghth for fixing seat and 04 Nos MS cleat of size 25mmX40mmX3mm for fixing back through MIG welding all as directed by GE/EIC |
| 270 | S&F of Seat and Back of Chair With New Seat made of moulded ply covered with 75mm PU foam and best quality tapestry cloth inrespective of what is shown on drg. The back shall be 12 mm thick moulded ply fixed to frame with screwand covered with 50 mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with weldiing to steel frame etc complete all as specified and directed. (Note - The Tapestary cloth shall be of ranging between Rs 350 per Meter and as per sample approved by GE). |
| 271 | M&L for removal of UNSV arm rest of chair and S&F of new arm rest of black integral Skin polyurethanere inforced with MS insert and shall be scrathch and weather resistant complete all as specified and directed. |
| 272 | S&F in replacement hard rubber shoes at the bottom of chair CB steel shown on drawing complete all as specified and directed. |
| 273 | Welding of broken parts of Chair Steel with 25 mm round MS conduite pipe of 1.6 gauge as per existing shapes & size. |
| 274 | M&L for painting two coat of PUpaintwithshade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. |
| 275 | Almirah Steel Medium/Small |
| 276 | Almirah Steel Large |
| 277 | Locker Steel |
| 278 | Table 3x2 with and w/o drawer & 3\"x3\" |
| 279 | Rack steel any type |
| 280 | Rack Shoe steel |
| 281 | Trestle store room |
| 282 | Computer Table |
| 283 | Chair School with Hand board |
| 284 | Chair Steel Padded, FD-75(M) |
| 285 | Chair CB steel with/with out arm |
