|
| 1 | Demolition of brick/stone masonry or PCC coping built in cement/lime mortar of any mix including all quoins pillar ashlars masonryand removal complete all as specified and directed. |
| 2 | M & L for Brickwork with subclass ‘B’ bricks,(OLD SIZE BRICKS) straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 3 | All as per Item No 2.00 here-in-above but for except brickscomplete all as specified and directed. |
| 4 | M & L for PCC (1:2:4) type B-1 (using 20 mm gradded stone aggregate)as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, drain channels, copings,parapetscopings,water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. |
| 5 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 6 | M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked), finished even & smooth without using extra cement complete all as specified and directed.Note: Supply only water proofing admixture shall be measured and paid for separately. |
| 7 | M & L for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked), finished even & smooth without using extra cement complete all as specified and directed.Note: Supply only water proofing admixture shall be measured and paid for separately. |
| 8 | Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 9 | M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 10 | M & L for preparation of newly plastered surfaces of wall & applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed.Note : Camouflague/plain pattern or pattern decided by Engr-in Charge |
| 11 | Demolition of cement concrete (un-renforced) in ground floor and paving. exc. 15 cm thickness(below or above ground level.) & removal of rubbish material complete all as specified and directed. |
| 12 | M & Lfor 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub basecomplete all as specified and directed. |
| 13 | M & L for providing and laying prepolishedcement concrete Chequered tiles 30cmx30cmx25mm thick, with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape heavy duty , set,jointed and pointed in neat cement slurry in floorsover screed bed 15mm thick (1:6) cement mortar complete all as specified and directed. |
| 14 | M & Lfor 100 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 15 | M & L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 16 | M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 17 | Dismantling floor hearth or wall tiling/kerb stone including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises complete all as specified and directed. |
| 18 | M & L for 18/19mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed cement mortar (1:6) complete all as specified and directed. |
| 19 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft loose soil complete all as specified and directed. |
| 20 | M & L cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 21 | M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 22 | Returning filling in incl spreading levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed. |
| 23 | Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above or below the starting point complete all as specified and directed. |
| 24 | DismantlingPlain or corrugated aluminium/steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 25 | M & L Pre-painted galvalume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, roofs,fixed with self tapping screws orL-type or J-type or cranked hook bolts complete all as specified and directed. |
| 26 | S & F 0.56mm thick Plain Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashinglength and girth as fixed with coach screw and Aluminium washer in roof and wall etc. fixed with self tapping screws complete all as specified and directed. |
| 27 | Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 28 | Excavation in post holes each not exc 0.5 cum, getting out soft/loose soil , returning, filling in and ramming earth or broken rubble mixed with earth aroundin layers not exc 25cm, watering and removing surplush soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 29 | M & L for PCC Type C-2 (1:3:6)(using 40 mm graded stone aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified and directed. |
| 30 | S & F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290) complete all as specified and directed. |
| 31 | S & F mild steel round bars as in tie bars of 10 mm dia and over, fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete all as specified and directed.Note: Cost of cutting to length, bent to shape rquired & binding with MS wire is included in above rate. |
| 32 | S & F for Mild steel screw boltsdia of Neck 5mm to 10mm(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed. |
| 33 | Dismantling structural steel work including door /gate , frame ,trusses complete all as specified and directed. |
| 34 | M & L Compound girdersand stachions, lattice giders, aerial masts, stair, gate, frame work, staging for water tanks and the like including caps, bases, splices etc channel sections or angles with plates, including all lattice bars, stiffeners, gussets plates, etc.Fe- 290 (Gde E-165) quality \"A\" complete all as specified and directed. |
| 35 | S & F Rolled mild steel Framed work as in doors or gates of angle or other section confirming to Fe-410-Swith gusset plate , rails braces etc. complete drilled for fixing of steel sheeting or othercoveringdoor etc to be prepared for hanging or slinding with and including either hooks hinges and rollers for slinding gates, guide rail of MS flat and framing required for fixing of rollers, pintle hinges, locking arrangement as required and hanging also fastening and fixing complete using Fe- 290 (Gde E-165) quality \"A\" complete all as specified and directed. |
| 36 | M & L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 complete all as specified and directed. |
| 37 | M & L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zincchromic primer including preparation of surfaces complete all as specified and directed. |
| 38 | Dismantling of fencing wire mesh,any type complete all as specified and directed. |
| 39 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 40 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire complete all as specified and directed. |
| 41 | Restraining & resecuringthe old chain link fencing including making good stable etc complete all as specified and directed. |
| 42 | S & F in repairGalvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured) complete all as specified and directed. |
| 43 | Restraining & resecuringthe old Galvanised 2 strand, steel barbed wire 2.24mm dia barbed including making good stable etc complete all as specified and directed. |
| 44 | S & F in repair punched tape concertina coil any dia or any other coil size of any type of standards,rails etc including provision of mild steel(annealed) binding wire complete all as specified and directed. |
| 45 | M & L for cleaning of strom water drains, inside/ outside cleaning by rough excavation n exc 1.5 mtr deep and getting out in soft/loose soil incl cleaning away all grass vegetation, splings, shrubs, bush wood of under growth roots removing excavated materials and obtained from cleaning to a distance not exc 50 mtr fromoutside the periphery of the area under cleranace depositing the same in low paying area complete all as specified and directed. |
| 46 | M & L for preparation of old plastered surfaces of wall & applying one coats ofweatherproof exterior emulsion paint complete all as specified and directed.Note: Camouflague/Plain pattern or pattern decided by Engr-in-Charge /Air force Authority. |
