|
| 1 | Demolition of brick work/ stone /boulders masonry built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed |
| 2 | Taking down cement plaster, in any thickness from brick or stonewalls etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material, complete all as specified and directed. |
| 3 | M&L forpre castcementconcrete blockmasonry 1;3;6 Type C1with solid blocks exe 10 cm in width and setting in CM 1:6 (Sample as approved by GE) |
| 4 | M&L for rendering 15mm thick onbrick work or concrete wall surfaces in 1:4 cement mortar finished even & fair all as specified and directed |
| 5 | M&L for preparation of newly plastered wall surfaces and application of two coats of cement based paint over a coat of primerall as specified and directed |
| 6 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed |
| 7 | M&L for walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and as directed |
| 8 | M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete all as specified. |
| 9 | S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 10 | Taking down concertina coilof any dia and type fixed with steel/iron fittings complete all as specified and as directed |
| 11 | S&FConcertina coil 715mm outer dia in closed condition and stretch to 700mm dia and 8.00m length.The core wire dia shall be 2.59mm galvanised with 240 gm/Sqm of zinc coating, the weight of each shall not be less than 8.57 Kg (plus or minus 5%) and shall contain 50 turns with fixing clips all as shown on drg and as specified Note : The cost of clips is included in the rate quoted against the item) complete all as specified and as directed |
| 12 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed |
| 13 | S&F framed work such as grills, gratings, etc with ends of bars shouldered & or riveted, or forged into spikes, framed guard bars etc & similar work conforming to Fe.290 Gde E-165 complete all as specified and as directed |
| 14 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of anti corrosive paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 15 | M&L for preparing old steel surfacesof any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for (reinforcement cut to facilitate demolition) all as directed by engineer in charge. |
| 17 | M&L for Providing precastcement concrete in cover slabs for man holes, beam and retaing wall etcand similar articles with plain faces, Type B1 1:2:4 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and directed.Note: Reinforcement shall be measured and paid seperately |
| 18 | M&L formild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for preparing old treated surface of existing treatment on external surfaces of wall and applying one coat cement based paint including filling cavities with cementious exterior grade wall care putty on disturbed portion of wall as required all as specified |
| 20 | Complete removal of existing treatment on wall by washing down and rubbing and applying two coats of cement base paint over a coat of primerall as specified |
| 21 | M & L for washing ofexternal wall surface by using mechanical ways i.e jet spray, grinding etc, in such a manner so that there should not be any impression, algae and vegetatin grow. The cost of labour & T&Pwherever required for preparation of surface are deemed to be included in the rates quoted.The cost of Scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed |
| 22 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground |
| 23 | Dismantling chain link fencing,wire mesh etcany type /size complete all as specified. |
| 24 | M&L for plain cement concrete type D2, mix 1:4:8 with 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified. |
| 25 | S&F PVC Coated chain link fencing (mesh 50mmX50mm Size) nominal dia of wire 300 (including PVC Coating) fixed to fencing posts using suitable bolts and nuts complete all as specified ( nuts and bolts shall be measured separately) complete all as specified |
| 26 | S&F Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other,or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm nexc 10cm 11 to 15mm long complete all as specified |
| 27 | M&L for MS work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified |
| 28 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above GL) complete all as specified and as directed |
| 29 | M&L for 100mm hardcore of gauge n exc. 63mm broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 30 | M&L for 75mm thick PCC 1:4:8 Type D-2 using 40 mm graded stone aggregate as in Sub base flooring all as specified and directed. |
| 31 | M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm under floors or in foundations spreading and levelling in layers n exc. 25 cm thick incl well ramming including watering as required complete all as specified and directed. |
| 32 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to SI 15658-2006 of 60mm thickness, with grey cement and pigment complete all as specified. |
