|
| 1 | Sch \"A\" Part-I (B/R)Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified anddirected. |
| 2 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified anddirected. |
| 3 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for fdn, etc or for shafts, wells, cesspits, manholes, pierholes etc and n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard / dense soil complete all as specified anddirected. |
| 4 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick completeall as specified anddirected. |
| 5 | M&L for sand filling under floors or in foundations including watering and consolidation |
| 6 | M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified anddirected. |
| 7 | M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregates) in foundation, filling and mass concrete complete |
| 8 | M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified anddirected. |
| 9 | M&L for TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified anddirected. |
| 10 | All as per item no 9 (here-in-before) but 8 to 10mm dia as in stirrups complete all as specified anddirected. |
| 11 | Damp proof course in cement concrete 1:2:4 40mm thick to horizontal or vetical surface including necessary formwork |
| 12 | S&F Roof trusses Fe 410-W(Gde-E- 250) quality-A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, or flat sec) incl gusset plat,distance pieces cleats et complete all as specified anddirected. |
| 13 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as iin roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified and as directed. . |
| 14 | M&L for formwork to chajja, roof beams, lintels and soffits of roof projections etc and similar items including edges complete all as specified anddirected |
| 15 | M& Lfor Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide |
| 16 | M & L Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20mm graded stone aggregate)in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified anddirected |
| 17 | M & L For RCC type B-1, 1:2:4 (20mm graded stone aggerates) as in beams, cantilevers, bressummers,lintels and the like complete all as specified anddirected |
| 18 | M&L for 15mm thick rendering in CM 1:6 over fair faces of brick / conc wall surfaces and finishing surfaces even and smooth without using extra cement complete all as specified anddirected. |
| 19 | All as per item No 18(here-in-before)but in CM 1:4 for other than fair faces of external wall surfaces and sponge finished complete all as specified anddirected. |
| 20 | All as per item No 18(here-in-before) but 10mm thick in CM 1:3 as in ceiling finished even and smooth using extra cement complete all as specified anddirected |
| 21 | S&F Providing precast cement concrete louvres and jallies, 25mm thick, type C0(1:3:6)12.5mm graded aggregate,(measured solid), including all mouldings but excluding frame, set in CM 1:6 complete all as specified and directed. |
| 22 | S&F for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with m.s square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed |
| 23 | M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plaincolour PVC© channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock and bottom rail on either side as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded. Sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing. |
| 24 | S&F 150 mm extruded aluminium alloy handles fabricated type. |
| 25 | S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed |
| 26 | S&F butt hinges 100mm, medium weight complete |
| 27 | S & F 300mm long aluminium anodised sliding door bolt with hasp staple ( bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed . |
| 28 | M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6complete all specified. |
| 29 | M&L for glazed ceramic coloured tiles (light shade) ofsize 350x250x7mm/450x300x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cementto match pver and including10 mm thick plaster in CM (1:4) complete all as specified and as directed. |
| 30 | M&L foe 20mm thickGranite (of any type) in window jambs work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 31 | M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified anddirected . |
| 32 | M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in floor subbase complete all as specified and directed |
| 33 | M&L for 25 mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded stone aggregate complete all as specified and directed |
| 34 | M & L for 75mm thick cement concrete type C2 (1:3:6) using 40mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 35 | M & L for preparation of newly plastered surface of wall and applying two coats of OBD of approved tint and pattern over one coat of primer over a coat of 3mm thick wall care putty on wallcomplete all as specified and directed |
| 36 | M& L for preparation of newly plastered surfaces of wall and applying two coat of acrylic emulsion over a coat of alkali resistant primer of same makeover one coat of white wash complete all as specified and directed for external wallsNote : Arcylic emulsion of BERGER / ASIAN PAINT/DULUX etc with minimum warranty period of 05 years to be used with primer of the same make |
| 37 | M&L for cement concrete Type B-0 1:2:4 (12.5 mm graded stone aggregate) in in lintels upto1.5m clear span, window cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directed copping, rounded or chamfered on edges and the like complete all as specified and directed. |
| 38 | Supply and fix false ceiling work of galvanised iron powder coated frame work of size 28x24x0.9mm thick angle, snap grid size (605mm X 605mm) frame work with Hangers 6mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expension hold fasteners 12.5mm dia. 40mm long and including necessary boldt, nuts and washers for flase ceiling with and including 4mm thick of size 600mm x 600mm HPSC (High pressure steam cured) prelamainated self embosed, textured disigner board E classic board as in ceiling tile fixed or laid/ inserted to framework complete all as specified and directed. |
| 39 | M & L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified . |
| 40 | S&F in repair Brass CP towel rail 20 mm dia, 60 cm long fixed with CP screws and wood cleats / rowel plug inwall, complete all as specified and as directed. |
| 41 | S&F for 15mm dia bore two in one bib Cock CP fency type screwed down for iron pipe 15 mm bore |
| 42 | S&F for chromium plated hand shower (health fauset), telephonic type with 8mm dia, 1 meter long CP flexible tube with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. |
| 43 | S&F for vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nosfixing bolts incl PVC seat cover but excludingflushing cistern and flush pipe) complete including fixing of P or S trap, complete all as specified and as directed. |
| 44 | S&F for 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets., flush pipe of polyethylene of low or high density or PVC 32mm dia for low level flushing cistern, PVC connection 600 mm longcomplete all as directed by Engr-in-Charge. |
| 45 | S&F for vitreous china wash hand basin (pedestal pattern) white flat back size 550 x 400 mm excl taps waste chain, plug and porcelain stopper but includingbracket, waste pipe and 32mm dia brass waste coupling/fitting complete all as specified and as directed. |
| 46 | S&F 15mm dia SwanNeckpillar taps (ISI Marked) fancy type cast copper alloy with capastan heads, chromium plated screwed down high, long screwed shanks and fly nuts screwed for iron pipe. |
| 47 | S&F for grating square fitting of size 150 mm made in two parts for smell and mosquito proofing with min 25mm water seal ofPTMT (Min wt 85 gms) complete all as specified and directed. |
| 48 | S & FPVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 49 | S&F 500 Ltr capacity Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including adaptor and 20mm ball brass valves , high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed |
| 50 | S&F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed |
| 51 | S&F in repair600 x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC bldg boardor commercial ply wood and fixed to wooden plugswith CP screws and cup washerscomplete all as specified and directed. |
| 52 | S&F for 15 mm dia bore bib taps cast copper alloy , chromium plated with long shank & cup, capston head, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. |
| 53 | S&F in repair 15mm dia angle stop/stop valvefancy chromium plated with long shank and cup concealed screwed down, high pressure, screwed both ends for iron or for unions and fixed. |
| 54 | S & F PVC (SWR) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement |
| 55 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor |
| 56 | Ditto as in item No.55but for 75 mm dia |
| 57 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 58 | S & F 110 mm PVC (SWR) junction single (single T) equal or unequal provided with access door. |
| 59 | S&F 110mm bore PVC (SWR) bendsprovided with access door any radius complete all as specified and as directed. |
| 60 | Ditto as in item No.59but for 75 mm dia |
| 61 | Supply and fix 110 mm PVC(SWR) reducer |
| 62 | Supply and fix PVC (SWR) vent cowl 75mm Dia. |
| 63 | S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 64 | M & L for Cement Concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, filling etc all as specified and directed. |
| 65 | M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed to drain pipe 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 66 | M & L for Precast Reinforced Cement Concrete 1:2:4 type B1 (using 20 mm graded stone agregate) asin cover slabs including necessary form work set in CM 1:4, complete all as specified and directed. |
| 67 | M & L for cutting into existing manholes for connecting new drains for 100mm internal dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm bore pipe line. complete all as specified and as directed. |
| 68 | S&F15 mm bore GI water tubemedium grade with all fittings and fixed to wall, floor and ceiling etc including concelaled/open completeall as specified and as directed. |
| 69 | S&F20 mm bore GI water tubemedium grade with all fittings and fixed to wall, floor and ceiling etc, complete including concealed/openall as specified and as directed. |
| 70 | S & F gate valve for 20 mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 71 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 72 | Excavating in post holes (or similar holes) each n exc 0.5 cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil complete |
| 73 | M&L 100 mm thick PCC 1:4:8 type B-1 using 20mm graded crushed stone aggregate as in path for interlocking tile all as specified. |
| 74 | S & F PVC (SWR)Multi floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement |
| 75 | Cuttiing chases,pinning, making good to facing where required . in brick wall for shelves etc and making good in C:M 1:3 cutting not exc 10 cm girth, complete all as specified and as directed. |
| 76 | Cutting opening, through brick walls for door, window and other openings or enlarging existing openings. converting window into doors openings etc cleaning and stacking bricks, removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks and rubbish n exc 50 mtrbuilt in cement mortar. |
| 77 | Sch \"A\" Part-I (E/M)M&L for point wiring with 1.5Sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor point in and including PVC rigid non metalic concealed conduit 19/20mm dia, medium duty, ISI marked to be teminated in pressed steel terminal boxes including 1.5 Sqmm PVC inslulated and unsheathed FRLS single core multistranded copper earth continuity conductore controlled by one switch and / or one regulator complete for following items complete all as specified and directed :-(a)One light point controlled by one Switch. |
| 78 | Supply and Fixing modular switch 1 way, 6 amps,1 module |
| 79 | Supply and Fixing modular cover plate with frame, 6 module complete all as specified and directed |
| 80 | Supply and Fixing modular metal flush box 6 module complete all as specified and directed. |
| 81 | Supply & fixing modular Lamp holder insulatedbody with back plate batten/angle type for batten fittings complete all as specified and directed. |
| 82 | S&F in replacement Modular ceiling rosethree terminals, ISI complete all as specified and directed. |
| 83 | Supply and fixingLED lightfittings 1 x 18 w,220V, AC decorative box type with diver, holder, including LED tubelight connecting up with three coreflexible multi strand copper conductor of suitable size from ceiling rose complete all as specified and directed. |
| 84 | Supply and draw submain wiring with two single core 4 sqmm FRLS PVC insulated copper cable 1100 volts grade multistranded, unsheathed conductor drawn into PVC casing and capping and all necessary fittings including 4 sqmm multi strand FRLS PVC insulated copper wire for earth continuity conductor connected to common earth dollycomplete after taking down the old unserviceable wiring complete all as specified and directed. |
| 85 | Supply and fix MCB Single pole 6 to 32Amps, breking copacity 10 KA (Type \" B\" ) complete all as specified and directed by Enge in charge. |
| 86 | Supply and fix MCB SPN 40Amps, breking copacity 10 KA (Type \" B\" ) complete all as specified and directed by Enge in charge. |
| 87 | Supply and Fix of MCB SPN , 4 way with 200 amps tated bus bar 240 volts double door with isolated Neutral bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed by Enge in charge. |
| 88 | Supply and fix exhaust fan, steel body AC Single Phase, 230 V of size 225/250 mm sweep with blades and frame and louvers shutter complete all as specified and directed at site. complete all as specified and directed at site.Note : Old unsv exhaust fan will be deposited to MES store yard.Make : Havells Terbo Force/Crompton EXHD/Usha Terbo HD. |
| 89 | Supply and fixing LED street light fitting 35/40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing epoxy powder coating IP-65 connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 25 mm bore light grade,1.5 mtr length and fixed with MS clamps, nuts and bolts and washer of suitable size on wall.all as specified and directed.Make: ENDURAPEARLNEOSL40WLED757SASYTOPC of Havells. |
| 90 | Supply and fixstreet light GI bracket,bend to 120 degree angle,made out of 40 mm bore,gI pipe,light grade (approx 1.5 mtr in length) including necessary two nos suitable size of clamps with nuts,bolts and washers etc and two coat of synthetic enameled paint over a coat of red oxide primer including taking down the old rusted one complete all as specified anddirected. |
