Name of Work: Replacement of Chainlink Fencing at Nakshatra Van and City Forest (front for 350 mtrs..
Sl. No.
Item Description
1
Particular
2
Dismentling steel work including distempering and stacking the materials with all lead and lift.
3
Excavation for foundation upto 1.5 m depth including sorting out andstacking of useful materials anddisposing off the excavated stuff upto 50 Meter lead.(A)Loose or soft soil
4
Providingmaterial and labour for laying cement concrete 1:2:4 (1-Cement:2 Coarse sand: 4 graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth
5
Providingmaterial and labour for fixing formwork with sheathing steel sheets so as to give a fair finish in (A) Foundations, Footings, Bases of Columns etc. and Mass concrete
6
Providing material & labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional
7
Providing material and labour for laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- gradedstone aggregates 20 mm nominal size) and curing complete including cost of formwork but excluding the cost of reinforcement for reinforced concrete work in (B) Slabs, landing, shelves,Balconis , Lintels, Coping, Wallcap,Beams, Girdersand Cantilever upto floor two level.
8
Providing Providing material & labour for 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) & curing complete.
9
Providing material & labour for Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete.
10
1. G.I Welded Mesh: The Weld Mesh panel for the fence would meet the standards of EN 10223-7 with the following key specifications. Panel size: 2500 mm X 2452 mm (W x H). Tolerance of + / - 2 % Mesh Size: 76.2 mm X 12.7 mm (W X H). Tolerance of + / - 2 mm Weld Shear strength: Minimum 50 % of the breaking strength of the mesh wire. Weight/Main Panel: 61.40 Kgs + /- 5 % Mesh Wire: Minimum Mass of Zinc Coating 40 GSM Specification for wire: IS 280 Horizontal wire Dia. : 4.0 mm (+/- 0.05mm): Vertical wire Dia. :4.0 mm (+/-0.05mm),No. of V-Bends : 4 nos.Tensile Strength of wire: Min 550 N/sq.mm, Powder Coating: The galvanized panels are subsequently Polyester Powder Coated after welding with a minimum coating thickness of 60-80 Microns. Polyester Powder: Jotun Facade 1407 with AMMA 2603 Qualicoat class 1Color: Green (RAL 6005).2. Supporting Posts:Type: H-Profile Post Specification: IS 808 Size: 75mmx50mm +/-1% Thickness: 2 mm +/- 0.1 mm +/-10% Length: 2500 mm +/- 2% Base Plate : 175x80x10 mm Weight Per Post: 13.7 Kgs +/-10% Coating: Pre-galvanized mass of Zinc coating minimum 100 GSM. Uniformity of Coating: As per IS 2629 Adhesion test for coating: As per IS 6745 Powder Coating: The galvanized posts are subsequently Polyester Powder Coated with a minimum coating thickness of 60-80 Microns. Polyester Powder: Jotun Facade 1407 with AMMA 2603 Qualicoat class 1 Color: Green (RAL 6005). 3. GI Anchor Bolt : Material: GI Size: M12 X 150 mm as per IS 8535-1987 Weight : 0.13 Kgs +/- 10% make : A1 Fence
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
