|
| 1 | Transportation, installation Dismantling of Rig machine, logging of bore hole and material casing Pipe & capping set T&P from site to site and return of above afte completion of work |
| 2 | DIRILING OF BORE BY RIGMACHINE |
| 3 | Leveling & Fitting of RC/DC 600/27 rig m/c and camp. Equipage |
| 4 | Driling of bore 675mm dia bit Bore GL to 70 mtr BGL |
| 5 | Driling of bore 550mm dia Bore 70 mtr to 120mtr |
| 6 | Driling of bore 550mm dia Bore 120mtr to 155mtr BGL |
| 7 | Supplying and unconsolidated packing of gravel with suitable size |
| 8 | Arrangement of water by ordinary bore for driling including pump set & genrator etc. |
| 9 | SUPPLY OF TUBEWELL ASSEMBLY |
| 10 | 300mm ERW housing pipe as per IS 4270 wall thickness 7mm ISI mark Jindal/Surya make |
| 11 | 200mm ERW Plane pipe as per IS 4270 7mm thickness ISI mark Jindal/Surya make |
| 12 | 200mm ERW Slotted housing pipe as per IS 8110 7mm thickness ISI mark Jindal/Surya make |
| 13 | MS fitting such as clamp, bail plug, reducer, well cap, girder & support structure |
| 14 | MS fitting such as ring/socket 8\" dia with threading |
| 15 | MS fitting such as ring/socket 12\" dia with threading |
| 16 | MS centre guide 8\" dia |
| 17 | MS Reducer 12\"X8\" |
| 18 | Supply and fixing M.S clamp 12\" |
| 19 | Supply and Fixing MS Retainer Cross for Reducer |
| 20 | LOWERING OF TUBEWELL ASSEMBLY |
| 21 | 300mm dia Housing pipe from GL to 55 mtr BGL |
| 22 | 200mm dia Plane pipe from 55mtr to 105 mtr |
| 23 | 200mm dia slotted pipe from 105mtr to 150 mtr BGL |
| 24 | DEVELOPMENT OF TUBEWELL |
| 25 | Transportation, installation Dismantling of 250/400/600 PSI Compressor |
| 26 | Charges for Development by 250PSI Compressor per Hour |
| 27 | Transportation, installation Dismantling of 2 Cusec OP Unit and Yield test, water test |
| 28 | Charges for Development of TW by 2 cusec OP Unit |
| 29 | SITC of Pumping Plant including pumps with motor starter, charger, Pannel, Cable complete in all respect with all requierd material T&P labour |
| 30 | Check valve PN 1.0 DPCV dia 150mm |
| 31 | Supply and Fixing NRV pip with threding 150mm dia size ISI mark heavy duty |
| 32 | S/F of nut & Bolt ISI mark |
| 33 | Switch Gear |
| 34 | SITC of column Pipe of MS Pipe for connecting submersible pumps |
| 35 | 150mm dia Size MS Pipe in mtr length |
| 36 | MS Flange 6\" M/F Threading with rubber packing and 08 no. nut&bolt |
| 37 | Suppply, installation of Chlorinating system with dosing pump 0-6 LPH capacity with 100 Litres(1W+1s) tank, valve, pipes with required acessories (Automatic Dosing System for Chemical injection) |
| 38 | Barricating of site |
| 39 | Excavation of earth in ordinary soil (loam, clay or sand) for pipe line and rising main trenches including lift up to 1.50m and lead upto 50m and refilling watering, ramming of the excavated earth into trench and also disposal of surplus earth upto 50m from the centre of trenches including supply of all material labour T&P etc complete as per instruction of Engineer-in-charge |
| 40 | Supply of 200mm dia K-9 (d.I) pipe for rising main/distribution system conforming to latest/relevant I.S 8329/2000 Specification with all jointing material such as special conforming to latest/relevant I.S specification suitable for D.I pipes as per IS-1239/2000 and IS 8329/2000 and or their latest amandent including for destination and all taxes and insurance etc. with loading unloading and carting upto site of work also including special for these pipes and lowering them into the trenches ald laying true alignment and gradient and jointing etc. complete (includingtesting of pipes line and cutting of pipe for making up the lenght but excluding the cost of trench) all complete as per instruction of Engineer-in-charge |
| 41 | M-150 Brick work in 1:4 one cement and four course sand mortar in foundation and plinth including supply of all materials labour T&P etc required for proper comption of the work Si no. 305a |
| 42 | 12mm thick plaster 1:4 with cement and four course sand including supply all material and labour T&P etc S.I no.584a |
| 43 | Suppply and Fixing Girder Foundation (2.70X.405)mtr with RS joint(175X85X6)mm |
| 44 | Supply and Fixing Top Girder 10\" Long |
| 45 | Supply and Fixing MS Base Plate |
| 46 | Supply and Fixing CI Top Column Flange 6\" |
| 47 | Supply and Fixing CI bend 6\" |
| 48 | Supply and Fixing CI Tee 150 mm dia ISI mark heavy duty |
| 49 | Supply and Fixing sluice valve 150mm dia size ISI mark heavy duty |
| 50 | Supply and Fixing Submersable motor pump 35 HP Starter Pannel With Automatic chnager with ms box for starter |
| 51 | 10 mm copper cable 3 core |
| 52 | Submersable motor pump 35 HP Electrycity Connection 45 KVA |
| 53 | GST 18% Please Enable Macros to View BoQ information |
