|
| 1 | SCAN COPY OF ESTIMATE IS ATTACHED SEPERATELY. |
| 2 | The O-Type Fountain has an overall height of 8 feet and a width of 7 feet. The structure is fabricated using 3 mm thick mild steel (MS) sheets, with an internal MS frame provided to ensure additional strength and structural stability.A 1.5-inch GI round curved pipe is fixed inside the frame for water circulation and ejection, complete with brass nozzles and all required adjustments for smooth and uniform water flow.The fountain is equipped with a 2 HP motor to ensure efficient performance. Additionally, (3) NOS of underwater RGB lights are provided, complete with proper wiring, connections, and a controller box for light color and intensity adjustment.The entire structure is treated with primer and finished with duco paint to provide enhanced corrosion resistance and long-lasting protection.A water tank of size 10 feet (length) × 5 feet (width) × 2 feet (depth) with an additional 6-inch outer height is provided The inner surface of the tank is finished with glass mosaic tiles, while the outer surface is clad with wooden- finish tiles for an aesthetic appearance.The scope includes all required plumbing accessories and complete electrical works, including cables, wiring, switches, MCBs, and panel box, to ensure proper installation, operation, and maintenance of the fountain. |
| 3 | Fencing Specification- The structure is 30 inches and a length of 48 inches. It is made with MS angle frames of 50mm x 6mm, along with a 2mm laser-cut sheet measuring 48 inches x 24 inches, fixed at the center of the frame. The laser-cut sheet is positioned 6 inches above the ground for an improved aesthetic. The frame will be grouted with concrete for stability. Primer and paint are applied for durability and to enhance the overall appearance. The rate shall be inclusive of excavation, PCC bed, RCC foundation, grouting, curing, anti-corrosive treatment of embedded MS members, finishing of exposed concrete, alignment, leveling, backfilling, disposal of surplus earth, and all incidental civil works required for proper installation, stability, and durability of the fencing system. |
| 4 | Bollard Specification - The bollard has a height of 30 inches and a width of 6 inches. It is made from 2mm laser-cut MS (mild steel) and features a warm white light installed inside. An acrylic sheet is included as a diffuser for even light distribution. The frame will be grouted with concrete for stability. The bollard is primer paint for enhanced durability, and all required electrical components are included. Wattage: 12W to 18W LED, Lumen output: 1200–1800 lm.input AC 230V, 50Hz, PF ≥0.95, THD <10%, system efficacy ≥100 lm/W, CCT 3000K/4000K, CRI ≥80, IP66 (housing) and die-cast aluminium body with powder coating, UV-stabilized diffuser, surge protection ≥4kV, operating temp 0°C to 50°C, 2 years warranty. |
| 5 | 100W RGB flood lights are being used to uplight the trees inside the rotary. Each light is installed on a proper foundation with MS cages to ensure correct alignment and safety. The setup includes all necessary electrical components and fittings for reliable operation. Please Enable Macros to View BoQ information |
