|
| 1 | Task 1 - Task Name:- : D-2.1 Material ,Material Supplied by MPMKVVCL |
| 2 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 3 | LT XLPE Arial Bunch XLPE Cable 3X25 + 1X16 + 1X25 Sq mm. with aluminium alloy bare messenger wire |
| 4 | LT Aerial bunched XLPE Cable 3 X 25+ 1 X 16+ 1 X 25 sqmm with aluminium alloy Bare messenger wire |
| 5 | Task 1 - Task Name:- : D-2.1 Material ,Material Supplied by Contractor |
| 6 | LT A.B Cable tension clamps (Galvanized) |
| 7 | LT A B cable Suspension clamps (Galvanized) |
| 8 | Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 9 | Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 10 | M.S.Nuts with Bolts |
| 11 | Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole |
| 12 | Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector- |
| 13 | Back filling of poles with boulders. |
| 14 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 15 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 16 | Stay set complete without Stay wire 16 mm. (Painted) |
| 17 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 18 | Clamp for 140 Kg PCC Pole MS Flat 50x6 mm |
| 19 | Stay Insulators 90X65mm |
| 20 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 21 | Task 2 - Task Name:- :E- 1.1 ,Material Supplied by MPMKVVCL |
| 22 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 23 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 24 | 11 KV Strain hardware (T&C type) fittings |
| 25 | 11 KV D.O. Fuse Unit Polymer type |
| 26 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 27 | Bi-metallic clamps Distribution Transformers Bushing |
| 28 | Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box |
| 29 | 11/0.4 KV Distribution transformer 25 KVA (Conventional) (Aluminium wound)(Rep-BGP) |
| 30 | XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts |
| 31 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 32 | XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts |
| 33 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 34 | Task 2 - Task Name:- : E- 1.1 Material ,Material Supplied by Contractor |
| 35 | Stay set complete without Stay wire 16 mm. (Painted) |
| 36 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 37 | Stay Insulators 90X65mm |
| 38 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 39 | Concreting of structures & foundation (1:3:6). |
| 40 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 41 | Complete jumpering of DTR |
| 42 | Danger Boards Enamelled 11 KV |
| 43 | Red oxide paint |
| 44 | Aluminium paint |
| 45 | M.S.Nuts with Bolts |
| 46 | Meter cum protection box for 25 KVA DTR |
| 47 | G.I. STRIP 25X3 MM1 |
| 48 | G.I.Pipe 40 mm Dia C grade type |
| 49 | Bentonite compound powder |
| 50 | Galvanized nut & bolt with washer |
| 51 | Task 3 - Task Name:- : Service Connection Charge Material Supplied by MPMKVVCL |
| 52 | PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR |
| 53 | Single phase Electronic meter with data downloading facility & box 5-30 Amps. |
| 54 | Task 3 - Task Name:- : Service Connection ChargeMaterial Supplied by Contractor |
| 55 | LED Lamp with 9 Watt (Complete) |
| 56 | PVC Bush |
| 57 | 3 Pin 5A Socket (Two no. Piano type switch, Bulb Bakelite Holder with wiring & E |
| 58 | Switch Board |
| 59 | Rack Bolt/Screw |
| 60 | Wooden Board 10\"x8\" |
| 61 | Task 4 - Task Name:- : C- 1.4,Material Supplied by MPMKVVCL |
| 62 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 63 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 64 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 65 | Task 4 - Task Name:- : C- 1.4 ,Material Supplied by Contractor |
| 66 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 67 | Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor |
| 68 | Back filling of poles with boulders. |
| 69 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 70 | Red oxide paint |
| 71 | Aluminium paint |
| 72 | Danger Boards Enamelled 11 KV |
| 73 | Aluminium Binding wire and tape |
| 74 | M.S.Nuts with Bolts |
| 75 | G.I. WIRES 4.0 MM. (8 SWG) |
| 76 | Stay set complete without Stay wire 16 mm. (Painted) |
| 77 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 78 | Stay Insulators 90X65mm |
| 79 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 80 | Fabricated Material ,Material Supplied by MPMKVVCL |
| 81 | D.C. Cross arms 5 ft centre to center (100x50x6 mm) Channel |
| 82 | Transformer mounting Channel (100X50x6 mm.) |
| 83 | Trans. Belting with 50 X 50 X 6 mm.angle with two crossfixing channels |
| 84 | Clamp for 140 Kg PCC Pole MS Flat 50x6 mm |
| 85 | Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm |
| 86 | D.O.Mounting Channel75x40x6mm |
| 87 | 11 KV V cross arm 65X65X6 mm. angle type |
| 88 | 11 KV Top clamp 65X65X6 mm. angle type |
| 89 | Labour & Transportation Charge |
| 90 | 18 % GST on Total Cost Please Enable Macros to View BoQ information |
