|
| 1 | Taking down shutters only of any description exc. 1Sqm but n. exc. 2Sqm each and removing from site, complete all as specified and directed. |
| 2 | Taking down chowkats or frames not exceeding 1.50 Sq m each with shutters (without taking off shutters from the frame) and removing from site, complete all as specified and directed. |
| 3 | Taking down chowkats or frames exceeding 1.50 Sq m but not exceeding 4.00 sq m each with shutters (without taking off shutters from the frame) and removing from site, complete all as specified and directed. |
| 4 | Taking down shutters only of any description exc. 1 Sqm but n. exc. 2 Sq m each and refixing in same opening after repairs, complete all as specified and directed. |
| 5 | Supply and fix 125X60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified andas directed. |
| 6 | Supply and fix 105X60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified andas directed. |
| 7 | Material and labour for plain cement concrete Type C1, 1:3:6 (using 20 mm graded crushed stone aggregate) for filling of hollowpressed steel frame complete all as specified and directed. |
| 8 | Material and labour for plain cement concrete Type B-0 1:2:4 (using 12.5 mm graded stone aggregates) for fixing hold fast including repairing of disturbed plaster (while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed. |
| 9 | Supply and fix 30 mm thick factory made shutters of 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass or gauge etc, with sash bars, edges of sash bars framing, moulded, fitted with cut and mitred beads for securing glass or gauge etc sizes of members of shutters as specified in SSR part - I, section 8 clause 8.20 (a) complete all as specified and directed. |
| 10 | Supply and fix 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 11 | Supply and fix Factory made PVC solid door frame or chowkat of size 50 mm x 47 mm, made out of 5mm plain colour PVC sheet reinforced with mild steel square tube etc, including necessary hold fasts, complete all as specified and directed. |
| 12 | Supply and fix Factory made solid panel PVC door shutter plain 30 mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered withand including heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with and including solvent cement for stiles andplain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail.Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitablePVC sheet beading and joined together withand including solvent cement and fixed in the frame complete all as specified and directed |
| 13 | Supply and fix 100 mm Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed. |
| 14 | Supply and fix 200 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 15 | Supply and fix 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 16 | Supply and fix 300 mm aluminium alloy sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 17 | Supply and fix aluminium door stopper of size 60 to 75 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed. |
| 18 | Material and labour for preparingnew wood and wood based surfaces and applying two coats of Synthetic enamel paint over a coat ofpink primer over 10 cm width/girth complete all as specified and directed. |
| 19 | Supply and fix Stainless steel wire cloth 0.254mm nominal dia of wire and average width of aperture 0.95mm and fixed with stainless steel wire staples/nut boults, etc with including necessary wooden beadscomplete all as specified and directed by Engr -in - Charge. |
| 20 | Supply and fix in repairs 100mm butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 21 | Supply and fix in repairs aluminium anodised barrel tower bolts of extruded section length of bolt 200mm complete all as specified and directed. |
| 22 | Supply and fix in repairs extruded Aluminiumalloy handles, fabricated type anodised size 150 mm complete all as specified and directed. |
| 23 | Supply and fix in repairs 125mm size hasp and staple alluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 24 | Supply and fix in repairsaluminium door stopper of size 60 to 75 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed. |
| 25 | Material and labour for welding in repairs n.exc 2.5cm in length and thickness of metal to be welded n.exc 6 mm for windows/door shutters/hinges etc including cleaning and preparing the surfaces complete all as specified and directed. |
| 26 | Supply and fix powder coated aluminium sections for doors, windows, ventilators etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 27 | Supply and fix in repairs Aluminium powder coated sliding windows three track consists of 03 Nos of shutters i.e 02 Nos of Glazed shutters and 01 No of gauzed shutter with size of sections of styles and rails all as directed by Engineer-in-ChargeNOTE :- (i) All aluminium section including galzing clips, snap beading, joining cleats, rubber packing screws etc as required are deemed to be including in the rate quoted. (ii) Thickness of powder coating minimum 50 micron.(iii) Glass & wire cloth shall be measured and paid separately under respective items |
| 28 | Supply and fix 4mm thick sheet glass, ordinary quality in square exc 0.5 Square Metre in each pane complete all as specified and directed. |
| 29 | Supply only Stainless steel wire cloth 0.254mm (30Gauge) nominal dia of wire and average width of aperture 0.95mm and fixed with stainless steel wire staples/nut boults, etc with including necessary wooden beadscomplete all as specified and directed by Engr -in - Charge. |
| 30 | Supply and fix aluminium louvered ventilators of section size100mmx25mmx1.50mm including 4mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh of 0.254 mm nominal dia and average width of aperture 0.95 mm fixed type on outside frame etc. including taking down existing steel ventilator all as directed by Engr-in-Charge. |
| 31 | Supply and fix in repairs 12 mm pre- laminatedparticles board interior Gde, pre-laminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work including 6mm thick lipping paticomplete all as specified and directed. |
| 32 | Material and labour for 12mm width teak wood lippind of 6mm thick fixed with nails over particle board complete all as specified and directed |
| 33 | Supply and fix in repairs Curtain rod mild steel chromium plated, 20/25 mm dia as per windows and door size including finials (brackets on end) with brackets duly screwed on wall with plastic rawl plug and stainless steel screw of 38 mm long complete all as specified and directed. |
| 34 | Supply and fix 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane including hacking out old broken glass any thickness, size from metal frame, glazed with putty or fixed with beads complete all as specified and directed. |
| 35 | Supply and fix 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares exceeding 0.5 Sqm in each pane including hacking out old broken glass any thickness, size from metal frame/ wooden frame, glazed with putty or fixed with beads complete all as specified and directed. |
| 36 | Material and labour for 2 nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads. area exc 3 Sq cmand n exc 6 sqcm complete all as specified and directed. |
| 37 | Demolition of cement concrete in below or above ground level n. exc 150 mm thick complete all as specified and directed. |
| 38 | Material and labour for Applying acrylic cementicious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) as per manufacturer instructions on rendered surfaces of floor and wall of sunken portion complete all as specified and directed. |
| 39 | Material and labour for PCC 1:5:10,Type E-2 using 40mm graded aggregate as in mass concrete (sunken portion) complete all as specified and directed. |
| 40 | Dismantling floor, hearth or wall tilling including cement mortar bedding ( but not backing) and rubbish off the premises complete all as specified and directed. |
| 41 | Material and labour for 15 mm thick screed bed in cement mortar 1:6 or bedding layer for laying floor finishes, complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Material and labour for non skid coloured (other than off white) ceramic tiles in floor joint free, 7 to 8mm thick of area of each tile exc 0.11 sqm butn. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match4 complete all as specified and directed. |
| 43 | Material and labour for non skid colouredceramic tiles in floor joint free, 7 to 8mm thick of area exc 0.06 sqm butn. exc 0.11 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 44 | Material and labour for plastering 10mm thick in cment mortar 1:4 finished rough (backside of dado & skirting) complete all as specified and directed |
| 45 | Material and labour forcoloured pattern glazed ceramic tiles 6 to7mm thick of size 300mm x 450mm as in skirting, dados etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to matchcement plaster on fair faces of brick or concrete surfacescomplete all as specified and directed. |
| 46 | Material and labour for double charged / Ultra charged vitrified ceramic tiles 8 to 9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in flooring set and joined in neat cement slurry and pointed in coloured cement to match coloured tilescomplete all as specified and directed. |
| 47 | Material and labour for Double charged / Ultra charged vitrified ceramic tiles 8 to 9 mm thick (square/rectangular) polished, as in skirting set and joined in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and directed.Note : Size of tile as directed by Engineer-in-charge. |
| 48 | Dismantling of Stone slab and tiles of any size and description or thickness in floors, dados & aprons etc., laid bedded and pointed in any mortar complete all as specified and directed. |
| 49 | Material and labour for20mm thick granite (of any type) work (Table rubbed and polished) in steps, jambs, pillars, windows cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite laid over and including screed bed of 15mm in cement mortar 1:6 complete all as specified and directed. |
| 50 | Material and labour for Machine cut cudappa stone slab 20-25 mm thicklaid over and including screed bed of 15mm thick in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 51 | Rounding to edges of stone slabs one edge, such as in steps, platform, and other similar situations complete all as specified and directed. |
| 52 | Drilling holes on granite, cudappa or trap stone for bolts. Pipes, etc. n.exc 25 mm dia complete all as specified and directed. |
| 53 | Material and labour for 75mm thick cement concrete 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, paving etc complete all as specified and directed. |
| 54 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 55 | Material and labour for plastering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 (internal) complete all as specified and directed. |
| 56 | Material and labour for preparation of newly plastered wall surface and applying two coats of oil bound distemper over a coat ofprimer including applying 1mm thick wall care putty complete all as specified and directed. |
| 57 | Material and labour for 5mm thick cement plaster on cement concrete surface as in ceiling in cement mortar 1:3 complete all as specified and directed. |
| 58 | Material and labour for preparation of newly plastered celling and applying two coats of white wash complete all as specified and directed. |
| 59 | Taking up or down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store .complete all as specified and directed |
| 60 | Refixing old steel tubing of 15mm bore and connecting in new or old positions including provision of necessary fittings (Walls, ceiling, floors etc) complete all as specified and directed. |
| 61 | Supply and Fix 15mm bore Tubes Medium grade galvanised with including fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed. |
| 62 | Taking up ordown 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store .complete all as specified and directed |
| 63 | Refixing old steel tubing of 20 mm bore and connecting in new or old position including provision of necessary fittings (walls, ceilings, floors etc.) complete all as specified and directed. |
| 64 | Supply and Fix 20 mm bore Tubes Medium grade galvanised with necessary fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed. |
| 65 | Cutting chases, pinning in, making good to facings of stone / brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed |
| 66 | Supply and fix in repairs brass chromium plated health faucet not less tha 1metre long complete for EWC complete all as specified and directed. |
| 67 | Supply and fix in repairs chromium plated, fancy typetwo way bib cock complete all as specified and directed. |
| 68 | Supply and fix in repairs 15mm bore bib taps fancy type, cast copper alloy, chromium plated, with cruth or butter fly handle, screwed down for iron pipe complete all as specified and directed. |
| 69 | Supply and fix in repairs15mm bore pillar taps, fancy type, castcopper alloy, with capstain heads, chromium plated, screwed down high pressure, with long screwed shanks and flynuts, screwed for iron pipe 15mm bore complete all as specified and directed. |
| 70 | Supply and fix in repairs showerrose 195 mm dia rim CP suitable for 15 mm bore pipe complete all as specified and directed. |
| 71 | Supply and fix in repairs 15 mm bore stop valve/angle valve fancy type, chromium platedcast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 72 | Supply & fixed in repairs 15mm bore angular Stop valves, cast copper alloy, fancy type, chromium plated with long or short shank and cup ( concealed type) screwed down high pressure , screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 73 | Supply and fix in repairs 15mm Brass CP wall mixer tap including provision for overhead shower formixing\" Hot or Cold\" water screweddown foriron pipe all as directed |
| 74 | Supply and fix in repairs PVC connection pipe 15mm dia and 450mmlong complete all as specified and directed. |
| 75 | Supply and fixin repairs PVC waste pipe 32mm dia for WHB/Sink (Make-as per sample) complete all as specified and directed. |
| 76 | Supply and fix in repairCP grating 100mm size fixing with white / greycement (suitable for Toilet, Bathroom, WHB and Kitchen sink) complete all as specified and directed. |
| 77 | Supply and fix in repairs, vitreous China wash basin, Ivory, flat back, size 450mm x 300mm including brackets, 15mm dia pillar tap cast copper alloy chromium plated, 32 mm dia brass CP waste coupling with long screwed shawles and flynuts, flanged end bedded in red lead cement and PVC connection 15 mm dia with PTMT nuts 450 mm long complete all as specified and directed. |
| 78 | Supply and fix in repairs PVC valveless syphonic action type flushing cistern 10 litrescapacity low level, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified and directed. |
| 79 | Supply and fix 600mm x 450mm X 5 mm thick mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood backing and12.7mm X 1.25mm thick aluminium angle frame fixed to wall with rawal plugs and screws on wall complete all as specified and directed. |
| 80 | Supply and fix in repairs stainless steel tubular towel rail 20mm dia , D type, 60 cm long 1.6 mm thick complete all as specified and directed. |
| 81 | Supply and fix in repairs, sinks made of stainless steel 1 mm thick with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm bowl size 410mm X 330 mm X 160mm complete all as specified and directed. |
| 82 | Supply and fix vitreous china wash down water closet pan (pedestal pattern) whitecolouredwith integrated \"P\" or \"S\" trap outlet including connection to flush pipe and out going pipe and plastic watercloset seat cover,ivory coloured, closed pattern with flat bottom and PTMT hinging device complete fixed in repairs complete all as specified and directed. |
| 83 | Supply and fix in repairs vitreous china water closet squatting pan\"orissa pattern, ivory coloured of size 580mm x 440 mm,with integral foot rest (excluding flushing cistern and flushing pipe) and outlet for \"P\" or \"S\" trap , WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed. |
| 84 | Supply onlyPVC valveless syphonic action type flushing cistern 10ltrs capacity low level, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern fixed in repairs complete all as specified and directed. |
| 85 | Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm²fixed complete to walls, ceilings or in floors etc, including necessary pipe fittings, complete all as specified and as directed by Engineer-in-Charge. |
| 86 | Supply and Fix 75 mm dia PVC (SWR) floor trap with gratings including jointing with solvent cement, including jointing to waste pipe and fixed incement concrete 1:2:4 type B1 (Using 20mm graded Stone aggregated) complete all as specified and directed. |
| 87 | Demolition and breaking up drain PVC (SWR) pipes jointed in cement mortar/solvent, internal dia of pipe upto 110mm in any position with wall or in floor etc.complete all as specified and as directed. |
| 88 | Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls.complete all as specified and as directed. |
| 89 | Supply and fix75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls.complete all as specified and as directed. |
| 90 | Supply and fix 75 mm PVC (SWR) bends any radius complete all as specified and as directed. |
| 91 | Supply and fix 75 mm PVC (SWR) bends any radius withacess door complete all as specified and as directed. |
| 92 | Supply and fix 110 mm PVC (SWR) bends any radius complete all as specified and as directed. |
| 93 | Supply and fix 110 mm PVC (SWR) bends any radius withacess door complete all as specified and as directed. |
| 94 | Supply and fix 75 mm PVC (SWR) branch piece single (single Y) equal or unequal withaccess door complete all as specified and as directed. |
| 95 | Supply and fix110 mm PVC (SWR) branch piece single (single Y) equal or unequal.withaccess door complete all as specified and as directed |
| 96 | Supply and fix 75 mm PVC (SWR) junction single (T single) equal or unequal.withaccess door.complete all as specified and as directed |
| 97 | Dismantling of water tanks of exc 500 litre and n exc 1000 litres capacity and removing to store andSupply and fix of 500 litresrotational moulded polythelene water storage three layered tanks ISI marked(Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. |
| 98 | Providing and applying two coats of Acrylic Elastomeric exterior water proofing compound of Dr Fixit raincoat or equivalent approved make and one coat of approvedpriming coat as per the water proofing coating manufacturer to vertical wall / chajjas surfaces at any level and location including scaffolding etc complete as per instruction of Engr-in-Charge. |
| 99 | Chipping of unsound/weak concrete material from slabs, beams, columns etc with manual chisel and/or by standard power driven percrussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc and disposal of debris for all lead and lifts all complete all as specified and directed |
| 100 | Supply and fixing thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete all as specified and directed. |
| 101 | Providing and applying rust inhabitation coat to exposed reinforcement bars and also new reinforcement bars after removing scales and rust complete as per specifications. Providing and appying bond coat to all exposed concrete surface and reinforcement bars prior to any treatment as per specification. Providing and applying single component, fiber reinforced, thixotropic repair mortar of average thickness 20mm and above of \"BASF\" (MASTER EMACO 348 S)/ or equivalent as manufacturer\"s specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc including removing debries out off DRDO premises at any level and location including scaffolding complete as per instruction of the Engr-in-charge. |
