|
| 1 | Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth and getting out for laying of pipe lines in any type of soil complete all as specified & directed. |
| 2 | Returning, filling including spreading, levelling, watering and well rammingin layers not exceeding 25 Cm each in soil complete all as specified & directed. |
| 3 | Removal of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified & directed. |
| 4 | M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in foundations/foot path etc complete all as specified and directed by Engr-in-Charge. |
| 5 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above gound level including removal of debris complete all as specified and directed. |
| 6 | M&L for taking up or down GI water tubing and connections of 15 mm dia including cleaning for refixing complete all as specified and directed. |
| 7 | Discription all as peritem No 6 here in before but of size 20 mm bore |
| 8 | Discription all as peritem No 6 here in before but of size 25 mm bore |
| 9 | Discription all as peritem No 6 here in before but of size 40 mm bore |
| 10 | Discription all as per item No 6 here in before but of size 50 mm bore |
| 11 | Discription all as peritem No 6 here in before but of size 80 mm bore |
| 12 | Discription all as peritem No 6 here in before but of size 100 mm bore |
| 13 | Re-laying / re-fixing galvanised mild steel water tubing of 15 mm bore with and including all fittings laid in trenches, under floor or fixed to walls / ceilings complete all as specified and as directed. |
| 14 | Discription all as per item No 13 here in before but of size 20 mm bore |
| 15 | Discription all as per item No 13 here in before but of size 25 mm bore |
| 16 | Discription all as per item No 13 here in before but of size 40 mm bore |
| 17 | Discription all as per item No 13 here in before but of size 50 mm bore |
| 18 | Discription all as per item No 13 here in before but of size 80 mm bore |
| 19 | Discription all as per item No 13 here in before but of size 100 mm bore |
| 20 | S & Fgalvanised steel water tubing medium grade 15 mm bore with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments including leakage testing complete all as specified and directed. |
| 21 | Discription as per item No 20 here in before but of size 20 mm bore |
| 22 | Discription as per item No 20 here in before but of size 25 mmbore |
| 23 | Discription as per item No 20 here in before but of size 40 mmbore |
| 24 | Discription as per item No 20 here in before but of size 50 mm bore |
| 25 | Discription as per item No 20 here in before but of size 80 mm bore |
| 26 | Discription as per item No 20 here in before but of size 100 mmbore |
| 27 | S & F in replacement of brass ball valves of size 15 mmbore ISI marked with iron wheel head, screwed both ends for iron pipe incl dismantling old U/S gate valves complete all as specified and directed. |
| 28 | Discription as per item No 27 here in before but 20 mm bore |
| 29 | Discription as per item No 27 here in before but 25 mm bore |
| 30 | Discription as per item No 27 here in before but 40 mm bore |
| 31 | Discription as per item No 27 here in before but 50 mm bore |
| 32 | S & F in replacement of ductile iron sluice valve of 80 mm bore class PN-1.6 ISI marked (as per IS 14846 of 2000) heavy duty with flanged ends with high tensile SS spindle and gun metal check nut, iron hand wheel and fixing with providing suitable nuts, bolts, washers and rubber gasket for packing etc complete all as specified and directed.Note:- Any damage made to pipe lines, over head reservoir while replacing the sluice valve will be repaired by contractor on his own cost. Make:-Kirloskar/leader/upadhayay/santNote:- Contractor will be intimated to replace the deffective sluice balve on telephonically followed by in written. Contractor has to arrange new sluice valves and complete the replacement work with 48 hrs after intimation failing which a penal recovery of Rs 400/- per hour will be charged from his payment. Contractor has to keep all required size sluice valve and T&P with manpower ready for fixing on urgent requirment and quote his rates accordingly. |
| 33 | All as per Srl item No. 32 here-in-before but 100 mm dia bore |
| 34 | All as per ser item No 32 here-in-before but 150 mm bore sluice valve. |
| 35 | All as per ser item No 32here-in-before but 200 mm bore sluice valve. |
| 36 | All as per ser item No 32 here-in-before but 250 mm bore sluice valve. |
| 37 | Supply, laying & testing in repair ductile iron pipe with socket and spigot ends of 100 mm bore class - K-9 ,with ceramic epoxy lining /coating inside and external zinc coating with a bitumen finishing layerconforming toIS - 8329-2000 (Reaffiremed - 2005 Edition 4.1) suitable for \"push on joints\" in any lengths and including providing jointsetc and including taking out old/ unserviceable CI / DI pipes from vertical position orfrom trenches etc complete all as specified and as directed. |
| 38 | Supply, laying & testing in repair ductile iron pipe with socket and spigot ends of 150 mm bore class - K-9 ,with ceramic epoxy lining /coating inside and external zinc coating with a bitumen finishing layerconforming toIS - 8329-2000 (Reaffiremed - 2005 Edition 4.1) suitable for \"push on joints\" in any lengths and including providing joints (Tyton joints)etc and including taking out old/ unserviceable CI / DI pipes from vertical position orfrom trenches etc complete all as specified and as directed. |
| 39 | Supply, laying & testing in repair ductile iron pipe with socket and spigot ends of 200 mm bore class - K-9 ,with ceramic epoxy lining /coating inside and external zinc coating with a bitumen finishing layerconforming toIS - 8329-2000 (Reaffiremed - 2005 Edition 4.1) suitable for \"push on joints\" in any lengths and including providing joints (Tyton joints)etc and including taking out old/ unserviceable CI / DI pipes from vertical position orfrom trenches etc complete all as specified and as directed. Note for item No 18 to 21 : (i) The cost of joints shall deemed to be included in unit rate quoted by the tenderer.(ii) Excavation and earth work shall be measured and paid seperately . |
| 40 | Supply, laying & testing in repair ductile iron pipe with socket and spigot ends of 250 mm bore class - K-9 ,with ceramic epoxy lining /coating inside and external zinc coating with a bitumen finishing layerconforming toIS - 8329-2000 (Reaffiremed - 2005 Edition 4.1) suitable for \"push on joints\" in any lengths and including providing joints (Tyton joints)etc complete all as specified.Note for item No 37 to 40 : (i) The cost of joints shall deemed to be included in unit rate quoted by the tenderer.(ii) Excavation and earth work shall be measured and paid seperately . |
| 41 | M & L for repairing leakages or blockage of water in CI/DI/GI pipes of 40 to 300mm dia bore de-watering of leaking pipe lines and trenches, burning out remains of existing lead joints to recover available quantity of lead and making new lead joint with retrieved material by providing additional quantity of lead as required at site incl all other jointing materials and testing complete all as specified and as directed. Notes: 1. Total excavation and earth work as required at site to carry out the repair work is deemed to be included in quoted rate.No separate cost for earth work claim by the contractor.2.Actual quantity of lead retrieved from leaking joints may vary from joint to joint and the same be considered to the barest minimum owing to loss due to high pressure of water jet and flooding of water from the joints. 3. No any claim whatsoever in this regard by the contractor for loss or non-retrival of jointing materials shall be admissible and the rate quoted is deemed to be inclusive of this aspect. Note:- Contractor will be intimated telephonically followed in writing for attending the leakages/broken or no water supply defects or repair works under this item.The defects or repair works under this item. the defects will be attended with in 8 Hrs of intimation and work will completed within 24 Hrs ofter intimation of defects failing which a penal recovery of Rs 1000/- per hour will be deducted from contractor\"s payments. Contractor has to arrange all T & P and manpower to attend defects on time without any extra financial effectand cost of all such aspect is deemed to be imcluded in unit rate. |
| 42 | Construction of Valve pit after dismantling of old u/s valve pitofSize 1050mm x1050mmx900mm (internaldimensions), Stone masonry constructton,tncludlng all necessary excavation and earth work in hard/ dense soil,returning,filling,in disposal of surplus soil to a distance not exceeding 50 m and depositing where directed , PCC in foundation of the mix (1:4..8) Type DQ (using 40 mm graded crushed stone aggregate), PCC Pocing in PCC(1:2:4), type BO using 12.5m crushed graded aggregate, brick masonry in cement mortar (1:4) rendering, 12 mm thick in cement mortar (1.4) Internalty,ftntshed even and fair and pointing flush externally as the work proceeds in the same mortar, Mild steel angle Iron 50x50x6mm frame,MS sheet cover 3.15mm thick with handle and locking arrangment ,painting ,all the exposed MS work with two coats of synthetic enamel paint of tint as approved by the GE/AGE over a coats of red oxide pnmer and painting all the MS embedded in PCC with two coats of black bituminous paint etc, Complete all as specified and shown on drawing. |
| 43 | Construction of Valve pit after dismantling of old u/s valve pitofSize 900mm x900mmx900mm (internaldimensions), Stone masonry constructton,tncludlng all necessary excavation and earth work in hard/ dense soil,returning,filling,in disposal of surplus soil to a distance not exceeding 50 m and depositing where directed , PCC in foundation of the mix (1:4..8) Type DQ (using 40 mm graded crushed stone aggregate), PCC Pocing in PCC(1:2:4), type BO using 12.5m crushed graded aggregate, brick masonry in cement mortar (1:4) rendering, 12 mm thick in cement mortar (1.4) Internalty,ftntshed even and fair and pointing flush externally as the work proceeds in the same mortar, Mild steel angle Iron 50x50x6mm frame,MS sheet cover 3.15mm thick with handle and locking arrangment ,painting ,all the exposed MS work with two coats of synthetic enamel paint of tint as approved by the GE/AGE over a coats of red oxide pnmer and painting all the MS embedded in PCC with two coats of black bituminous paint etc, Complete all as specified and shown on drawing. |
| 44 | M & L for cutting of GI/DI/CI pipe 80 to 150 mm bore carefully for inserting fittings such as bend, tee, socket pieces, collar etc complete all as specified and as directed. |
| 45 | S&F in replacement PVC flexible corrugated pipe of size 80mm bore for suctionas per sample complete all as directed andspecified. |
| 46 | S & F in repairs cast iron foot valves with flanged end in replacement 100 mm bore all as per including necessary rubber gasket, MS nuts, bolts, washers etc of suitable size complete all as specified and directed. Make:-Kirloskar/leader/upadhayay/santNote:- Contractor will be intimated to replace the deffective foot vavle on telephonically followed by in written. Contractor has to arrange new footvalves and complete the replacement work with 48 hrs after intimation failing which a penal recovery of Rs 400/- per hour will be charged from his payment. Contractor has to keep all required size foot valve and T&P with manpower ready for fixing on urgent requirment and quote his rates accordingly. |
| 47 | All as per item No 46here in before butfoot valves with flanged end in replacement 150 mm bore allas directed andspecified . |
| 48 | All as per item No 46here in before butfoot valves with flanged end in replacement 200 mm bore all as directed andspecified . |
| 49 | S & F in replacement of MCCB, 4 Pole, 200 Amps 415 Volt AC, 50 Hz, rupturing capacity 50 KA with adjustable thermal and fixed magnetic tripping systems against over load and short circuit conditions conforming to IS:13947 (Part-2) Ics = 100%ICU allas directed andspecified . Make : Havells/ L&T/ Standard / LEGRAND/Schneider/Indo Asian. |
| 50 | All as per item No 49here in before but MCCB of capacity 160 Amps 36 KA all l as directed andspecified . |
| 51 | All as per item No 49 here in before but MCCB of capacity 125Amps25 KA ,3 Pole all l as directed andspecified . |
| 52 | All as per item No 49here in before but MCCB of capacity 100 Amps 16 KA ,3Poleall l as directed andspecified . |
| 53 | S & F in replacement of 50 mm bore air release valve double chamber as per IS 14845 including mounting GI pipe and clamps as per requirement at site suitable for cast iron pipe/ ductile iron pipe incl all fittings washer, nuts & bolt etc complete all as specified and directed. |
| 54 | S & F in replacement of 100 mm bore air release valve double chamber as per IS 14845 including mounting GI pipe and clamps as per requirement at site suitable for cast iron pipe/ ductile iron pipe incl all fittings washer, nuts & bolt etc complete all as specified and directed. |
| 55 | S & F in repairsof change over switch with advanced neutral, OFF LOAD, 100 Amps, 4 pole, AC 415 Volt, manual Change over insheet metal enclosure including operating handlecomplete all as specified and directed. |
| 56 | S & F in repairs of change over switch with advanced neutral,OFFLOAD, 200 Amps, 4 pole, AC 415 Volt, manual Change over insheet metal enclosure including operating handle complete all as specified and directed. |
| 57 | S & F in repairs of change over switch with advanced neutral, ON LOAD, 400 Amps, 4 pole, AC 415 Volt, manual Change over insheet metal enclosure including operating handle complete all as specified and directed. |
| 58 | S & F in repairsof change over switch with advanced neutral, OFF LOAD, 630 Amps, 4 pole, AC 415 Volt, manual Change over insheet metal enclosure including operating handle complete all as specified and directed. |
| 59 | S & F in repairs of change over switch with advanced neutral, OFF LOAD, 1000 Amps, 4 pole, AC 415 Volt, manual Change over insheet metal enclosure including operating handlecomplete all as specified and directed. |
| 60 | S & F of change over switch with advanced neutral, OFF LOAD, 1200 Amps, 4 pole, AC 415 Volt, manual Change over insheet metal enclosure including operating handle complete all as specified and directed. |
| 61 | Taking down existing vintage HPSV/CFL/ LED type security Light fitting at pump house area and replacing the same with Energy efficient LED type Bldg security light fitting Pressure die cast aluminium housing with heat resistant toughened glass & IP66 protection 35 watts(with lens)with Luminous Efficacy more than 100 Lm and Power Factornot less than 0.95 all as specified and directed . |
| 62 | M&L in repairsGI bracket made out of 35 mm dia GI pipe light grade 1.20 mtr long bend to shape or size as directed at site for mounting street light complete all as specified and directed. |
| 63 | S&F, in repair insulatedPVC sheathed copper conductor cable of size 1.5 Sqmm, 3 core, 1100 volts grade, multistranded, passing throuth existing pipe, fixed on pole/wall from juntion box to street light fitting complete all as specified and directed. including taking down old |
| 64 | M & L for opening of soft starter EMX 3 series of L&T make 40-100 HP capacity from the existing panel (by a skilled representative of original manufacturer) for servicing, repair, replacement, refixing of spares like control card (EMX3 Series), display, supply card, contactor, CT, fuses etc, tightening of loosen integral wiring, copper lugs, terminal blocks, nut and bolts, washers etc complete all as specified and directed by Engr-in-Charge. Note :-1. The Manufacturers Rep or authorised service dealer representative/technician will be arrenged by contractor and necessary documents/ proof of technician will be produced to Eng-in-Charge before starting repair work.2. spares to be replaced will be measured and paid seperately as supply only. 3. Cleaning of dust and other materials to be carried out only using of CRC 2-26. 4. Cost of skilled representative, tools, wiring, copper lugs, terminal blocks, nuts and bolts, cleaning materials, etc required at site included in the quoted rates.5.If any damage occured in the spares during repair the same will be replaced by the contractorat at his own cost. |
| 65 | Supply, laying, jointing and testing in replacement of unserviceable bib taps for 20mm bore pipe chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete, all as specified and directed by Engr-in-charge. |
| 66 | M & L for cleaning/ scraping ofsteel/ cast iron surfaces of existing dull painting ofValve pit chamber, pipe lines and valves, pump, motors etc and applying two coats of synthetic enameled paint over a coat ofred oxide primer by spray machine complete, all as specified and directed by Engr-in-charge. Note : The Chamber, valves, connected pipe line etc. shall be painted according to colour code specified as per IS Instructions and as directed by Engr-in-Charge at site. |
| 67 | S&F in replacement of 20 mm Ball valves (float valve) PTMT ,high pressure , with polythene float and fly-nut complete screwed for iron pipe suction pipe, including nut bolt & washers for joints and jointing material complete all as specified and as directed by Engineer in Charge. |
| 68 | Supply and fix water pipe line route indicator made of size 400 x 300 x 25mm of precast RCC (1:2:4) type B-O using 12.5 mm graded stone aggregate complete all as specified and directed. Note :- Route indicator should be writen as main water supply line complete as directed by Engr-in-Charge. |
| 69 | S & F in repairs GIfittingsi.e bends, reducer, tail pieces, tapers, tees, caps and plugs with MS plate, nuts, bolts washers etc for size 80 to 300 mm bore complete all as specified and as directed. |
| 70 | S& Fin repair ductile iron Pipe fittings for spigot and socketed or flanged pipes i.e, bends, reducer, tail pieces, tapers, tees, caps etc of 80 mm to 300 mm bore pipe complete all as specified and as directed. |
| 71 | S& F in repairs cast Iron fittings for spigot and socketed or flanged ends pipe i.e. bends, reducer, tail pieces, tapers, tees, caps and plugs with MS plate, nuts, bolts washers etc for size 80 to 300 mm bore complete all as specified and as directed. |
| 72 | S & F in repairsGIfittingsi.e bends, reducer, tail pieces, tapers, tees, caps and plugs with MS plate, nuts, bolts washers etc for size40 to 75 mm bore complete all as specified and as directed. |
| 73 | M&L for MS Fabrication work, made out of structural steel sections as in frame work for cable & piping ducts / MS door panels etc at water supply installations, MS angles / flats /plain sheets of appropriate gauge, cut to size and made to the exisitng shape suitable for fixing MS chequred duct covers / door panels, including nuts, bolts and washers, welding / bracing works, bendingcold or hot drilling holes for bolts in any shape or sizes as required including onecoat of primer and two coats of synthetic enamel paint to the entire steel surfaces all as specified and directed. |
| 74 | S& F in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. (For Pumphouse and open well) |
| 75 | M & L for cutting of stone block pavement/road a depth up to 1.5 mtr below the normal ground level and in width equal to external dia plus 300 mm for lay pipe line upto 300 mm dia across the road in horizontal position and making good the cut portion filled with PCC 1:3:6 type C-2 using 40 mm graded stone aggregates 450 mm thick from TOP over 300 mm thick hard core over filled earth to levelled with existing surfaces for smooth plying of vehicles etc complete all as specified and directed. The repaired portion will be match to the existing surface. Note• Cost of PCC ,hard core,stones and Earth shall deemed to be included in unit rate quoted by the tendered. |
| 76 | Disconnecting and removing existing unserviceable interlocking wiring and connection of electric control panels of any description and in any position after through checking and inspection at site and material & labour for repair of electric control panel and its interconnected system with using PVC insulated ,unsheathed multistranded copper conductor cable,single core 1.5 Sqmm size, 1100 Volts gradefor making functional control of the fire fighing pump/water supply pump, auxilliary contactor,push buttons, indicators, Ammeter,Voltmeter complete as required at site for functioning of panel complete all as specified and directed by Engineer-in-Charge. Note:- (i) Work shall be executed at site by proper skilled,experiencedworkers . (ii) The complete panel shall be checked and tested on full load after necessary repairs and replacement of unserviceable parts for its smooth functioning and proper interlocking including tripping on single phase. (iii) Rate for replacement of unserviceable parts deemed to be included in quoted rate. |
| 77 | Supply and fix in repairs3 pole power contactors type ML 10, 250A AC-1, 200A AC- 3, 200A AC-4rating415V, 50Hz.MAKE : L & T CAT Part No. SS90935 or equivalent make as given in Appendix B to PS. |
| 78 | Supply and fix in repairs 3 pole power contactors type ML 6, 250A AC-1, 200A AC- 3, 200A AC-4rating415V, 50Hz.MAKE : L & T CAT Part No. SS90933 or equivalent make as given in Appendix B to PS. |
