|
| 1 | Dismantling of existing electric passenger lift main controller including all electrical and mechanical accessories of lift having capacity 544 kg/884 kg passenger lift installed at CGRA Rameswaram complete all as specified and directed.Note :- (i) Contractor will make good, in case of any damage caused to surface of lift shaft & machine room during the dismantling at his own cost and no separate payment will be made on this account for civil work as directed .(ii) Contractor/OEM should ensure that all safety condition/accessories as per latestIS/Safety instruction on elevator are catered while quoting. |
| 2 | Dismantling of existing electric passenger lift car cabin including all electrical and mechanical accessories of lift having capacity 544 kg/884 kg passenger lift installed at CGRA Rameswaram complete all as specified and directed.Note :- (i) Contractor will make good, in case of any damage caused to surface of lift shaft & machine room during the dismantling at his own cost and no separate payment will be made on this account for civil work as directed .(ii) Contractor/OEM should ensure that all safety condition/accessories as per latestIS/Safety instruction on elevator are catered while quoting. |
| 3 | Dismantling of existing electric passenger lift lading doors including all electrical and mechanical accessories of lift having capacity 544 kg/884 kg passenger lift installed at CGRA Rameswaram complete all as specified and directed.Note :- (i) Contractor will make good, in case of any damage caused to surface of lift shaft & machine room during the dismantling at his own cost and no separate payment will be made on this account for civil work as directed .(ii) Contractor/OEM should ensure that all safety condition/accessories as per latestIS/Safety instruction on elevator are catered while quoting. (iii) Landing doors installed at all floor of one lift will be considered as one job only. |
| 4 | Supply, installation, testing & commissioning of following components by OEM for passenger elevator electrically operated of capacity 13 passenger (884 Kg) Gearless machine and including fixing arrangement with Microprocessor controller (VVVF) regenerative based (including drive calibration pad for upload/down load the data), selective collective control, speed 1.5 mtr per second serving ground floor and 9 upper floor (G+8), total nine landings complete all as specified & directed.Make of Lift : Thyssenkrupp |
| 5 | Supply, installation, testing & commissioning of Micro processor based VVVF Regenerative type main controller with closed loop system. Type of signal system FIGS fixtures with dot matrix display and car position indicator in car all fixture in SS face plate (both inside/out-side), provn of travelling cable with copper conductor FRLS of suitable size & core or required wiring to intercom speaking, connect to complete cell and provn of through & other accessories, Electric cabling and wiring in FRLS copper cable including all necessary PVC conduits ISI marked of suitable size and anti nuisance car call protection, independent servicing (for duplex only) overload device, nudging, emergency fireman\"s service. Emergency car light unit infrared curtain door protection, door time protection, Emergency alarm button, extra door time of lobby & parking door open/close button, emergency battery backup for light, manual rescue operation,belt inspection drive Auto fan cut off as per IS specifications complete all as specified and per directed. Make of Lift : Thyssenkrupp |
| 6 | Supply, installation, testing & commissioning of following components by OEM for passenger elevator electrically operated of capacity 13 passenger (884 Kg) Gearless machine and including fixing arrangement with Microprocessor controller (VVVF) regenerative based (including drive calibration pad for upload/down load the data), selective collective control, speed 1.5 mtr per second serving ground floor and 7 upper floor (G+7), total eight landings complete all as specified & directed.Make of Lift : Thyssenkrupp |
| 7 | Supply, installation, testing & commissioning of Car cabin of size WxDxH (2000mmx1100mmx2200mm) and Automatic Centre opening doors (Car) in SS honey comb finish hand rails (OD>40 mm) on 1 sides of car cabin, floor annunciator with music/arrival chime, Car Operating Panel one sides Car Cabin made out of minimum 18 SWG stainless steel (Vandal finish) as well as car cabin roof covered with 18 SWG stainless steel (hair line finish), cabin floor made of Vinyl Tiles, car cabin having powered doors and inspection box at top of the car cabin complete having a minimum fire resistance rating of 01 Hours, LED Light Ultra slim decorative aluminium casted, recess mounted square fixture in white with opal diffuser and separate electronic driver, suitable for low depth ceiling 12 W with complete accessories including necessary wiring & single phase centrifugal type cross flow blower 270 cu meter/hour complete all as specified and per directed .Make of lift : Thyssenkrupp |
| 8 | Supply, installation, testing & commissioning of Landing Doors in SS honey comb finish with necessary fittings, and complete fixing of Door sensor min 81 beam, 2D infra red full length infra red screen door sensor, over load warning indicator, intercom system with single automatic push button operation with/without attendant, Do\"s & Don’ts chart on stainless steel to be installed inside the car cabin as per directed complete all as specified and per directed. Make of Lift : Thyssenkrupp Note: - Each Job includes eight landing doors. |
| 9 | Supply, installation, testing & commissioning of following components by OEM for passenger elevator electrically operated of capacity 08 passenger (544 Kg) Gearless machine and including fixing arrangement with Microprocessor controller (VVVF) regenerative based (including drive calibration pad for upload/down load the data), selective collective control, speed 1.5 mtr per second serving ground floor and 7 upper floor (G+7), total eight landings complete all as specified & directed.Make of Lift : Thyssenkrupp |
| 10 | Supply, installation, testing & commissioning of Micro processor based VVVF Regenerative type main controller with closed loop system. Type of signal system FIGS fixtures with dot matrix display and car position indicator in car all fixture in SS face plate (both inside/out-side), provn of travelling cable with copper conductor FRLS of suitable size & core or required wiring to intercom speaking, connect to complete cell and provn of through & other accessories, Electric cabling and wiring in FRLS copper cable including all necessary PVC conduits ISI marked of suitable size and anti nuisance car call protection, independent servicing (for duplex only) overload device, nudging, emergency fireman\"s service. Emergency car light unit infrared curtain door protection, door time protection, Emergency alarm button, extra door time of lobby & parking door open/close button, emergency battery backup for light, manual rescue operation,belt inspection drive Auto fan cut off as per IS specifications complete all as specified and per directed. Make of Lift : Thyssenkrupp |
| 11 | Supply, installation, testing & commissioning of following components by OEM for passenger elevator electrically operated of capacity 08 passenger (544 Kg) Gearless machine and including fixing arrangement with Microprocessor controller (VVVF) regenerative based (including drive calibration pad for upload/down load the data), selective collective control, speed 1.5 mtr per second serving ground floor and 8 upper floor (G+8), total nine landings complete all as specified & directed.Make of Lift : Thyssenkrupp |
| 12 | Supply, installation, testing & commissioning of Micro processor based VVVF Regenerative type main controller with closed loop system. Type of signal system FIGS fixtures with dot matrix display and car position indicator in car all fixture in SS face plate (both inside/out-side), provn of travelling cable with copper conductor FRLS of suitable size & core or required wiring to intercom speaking, connect to complete cell and provn of through & other accessories, Electric cabling and wiring in FRLS copper cable including all necessary PVC conduits ISI marked of suitable size and anti nuisance car call protection, independent servicing (for duplex only) overload device, nudging, emergency fireman\"s service. Emergency car light unit infrared curtain door protection, door time protection, Emergency alarm button, extra door time of lobby & parking door open/close button, emergency battery backup for light, manual rescue operation,belt inspection drive Auto fan cut off as per IS specifications complete all as specified and per directed. Make of Lift : Thyssenkrupp |
| 13 | Supply, installation, testing & commissioning of following components by OEM for passenger elevator electrically operated of capacity 13 passenger (884 Kg) Gearless machine and including fixing arrangement with Microprocessor controller (VVVF) regenerative based (including drive calibration pad for upload/down load the data), selective collective control, speed 1.5 mtr per second serving ground floor and 7 upper floor (G+7), total eight landings complete all as specified & directed.Make of Lift : Thyssenkrupp |
| 14 | Supply, installation, testing & commissioning of Micro processor based VVVF Regenerative type main controller with closed loop system. Type of signal system FIGS fixtures with dot matrix display and car position indicator in car all fixture in SS face plate (both inside/out-side), provn of travelling cable with copper conductor FRLS of suitable size & core or required wiring to intercom speaking, connect to complete cell and provn of through & other accessories, Electric cabling and wiring in FRLS copper cable including all necessary PVC conduits ISI marked of suitable size and anti nuisance car call protection, independent servicing (for duplex only) overload device, nudging, emergency fireman\"s service. Emergency car light unit infrared curtain door protection, door time protection, Emergency alarm button, extra door time of lobby & parking door open/close button, emergency battery backup for light, manual rescue operation,belt inspection drive Auto fan cut off as per IS specifications complete all as specified and per directed. Make of Lift : Thyssenkrupp |
| 15 | Supply, installation, testing & commissioning of following componentsby OEM for passenger elevator electrically operated of capacity 08 passenger (544 Kg) Gearless machine and including fixing arrangement with Microprocessor controller (VVVF) regenerative based (including drive calibration pad for upload/down load the data), selective collective control, speed 1.5 mtr per second serving ground floor and 8 upper floor (G+8), total nine landings complete all as specified & directed.Make of Lift : Thyssenkrupp |
| 16 | Supply, installation, testing & commissioning of Car cabin of size WxDxH (1300mmx1100mmx2200mm) and Automatic Centre opening doors (Car) in SS honey comb finish hand rails (OD>40 mm) on 1 sides of car cabin, floor annunciator with music/arrival chime, Car Operating Panel one sides Car Cabin made out of minimum 18 SWG stainless steel (Vandal finish) as well as car cabin roof covered with 18 SWG stainless steel (hair line finish), cabin floor made of Vinyl Tiles, car cabin having powered doors and inspection box at top of the car cabin complete having a minimum fire resistance rating of 01 Hours, LED Light Ultra slim decorative aluminium casted, recess mounted square fixture in white with opal diffuser and separate electronic driver, suitable for low depth ceiling 12 W with complete accessories including necessary wiring & single phase centrifugal type cross flow blower 270 cu meter/hour complete all as specified and per directed. Make of Lift : Thyssenkrupp |
| 17 | Supply, installation, testing & commissioning of Landing Doors in SS honey comb finish with necessary fittings, and complete fixing of Door sensor min 81 beam, 2D infra red full length infra red screen door sensor, over load warning indicator, intercom system with single automatic push button operation with/without attendant ,Do\"s & Don’ts chart on stainless steel to be installed inside the car cabin as per directed complete all as specified and per directed. Make of Lift : ThyssenkruppNote :- Each Job includes nine landing doors. |
| 18 | Schedule of Credit (Minus) Rs.24000.00NOTE: Bidder shall insert credit amount of Rs. 24000.00 as ratein Green field under Col-13. |
