|
| 1 | Dismantling floor hearth or wall tiling incl cement mortar bedding (But not backing) removing serviceval tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of Concrete of any description (unreinforced) and in any position, complete all as specified and directed. |
| 3 | M&L for 25mm thick levelling course in cement concrete type B-1 (1:2:4) using 20mm graded aggregate, complete all as specified and directed. |
| 4 | M & L for 400x400mmx6 to 7mm thick, non skid ceramic coloured tiles in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 20mm thick screed bed in CM (1:4) etc complete all as specified and directed byEngineer-in-Charge. |
| 5 | M&L for providing glazed ceramic colouredwall tiles of size 300mmx600mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 6 | M&L Granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and marble dust (1:2) with admixure of pigment to match the shade of granite stone in CM 1:4including cutting and polishing including 15mm thick screed bed or bedding layer of CM 1:4 of mortar for laying on platform, cill or concrete surface etc complete all as specified & directed. |
| 7 | M&L Granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and marble dust (1:2) with admixure of pigment to match the shade of granite stone including cutting and polishing including 15mm thick plastering of CM 1:4 of mortar for skirting or vertical surfaces etc complete all as specified & directed. |
| 8 | Demolition of brick work or stone/ boulder masonry/ precast block walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed. |
| 9 | M&L for brick work in cement mortar 1:4 of old size sub class ‘B\" bricks straight or curved on plan exceeding 6mtr mean radius, complete all as specified and directed. |
| 10 | M&L for brick work in cement mortar 1:6 of old size sub class ‘B\" bricks straight or curved on plan exceeding 6mtr mean radius, complete all as specified and directed. |
| 11 | M&L for Brick work with sub class \"B\" bricks, straight or curved on plan to anyradius in half brick thick walls built in CM 1:6, complete all as specified & directed. |
| 12 | M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even & smooth without using extra cement including scaffolding upto any height and curing the surface, complete all as specified and directed. |
| 13 | Taking down cement plaster on brick or concrete surfacesany description including raking out joints hacking for key scrubbing down with water complete all as specified and directed. |
| 14 | M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement and curing the surface, complete all as specified and directed. |
| 15 | M&L for rendering 5mm thick on cement mortar in CM 1:3in RCC roof slab, facia or edging of chajjas, ceiling and roof projectionmaking the line in true shapefinished even & smooth without using extra cement, complete all as specified and directed. |
| 16 | M&L for rendering 10mm thick on concrete in CM 1:3in facia or edging of chajjas, ceiling and roof projectionmaking the line in true shapefinished even & smooth without using extra cement, complete all as specified and directed. |
| 17 | M&L applying 3mm thick wall care puttyon walls and make the surface of level, including preparation of new plastered surface of wall and applying two coats of oil bound distemper complete all as specified and directed. |
| 18 | M&L forpreparation of new plastered surface of ceiling and applying three coats of white washcomplete all as specified and directed. |
| 19 | M&L for preparation of old plastered or unplastered surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc. and applying two coats of oil bound distemper on wall over a coat of primer complete all as specified and directed. |
| 20 | M&L forpreparation of old plastered surface of ceiling and applying two coats of white washcomplete all as specified and directed. |
| 21 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC, complete all as specified and directed. |
| 22 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm and n.exc 4 Sqm each, complete all as specified and directed. |
| 23 | Supply and fix steel hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafter and running rails and guides for sliding door fixed with angle cleat or other connecting plates etc complete conforming to IS-4923-1997 of FE 410-W (Gde-E-250) quality A complete all as specified and as directed |
| 24 | S & F 3 ways sliding anodized aluminium glazed window shutter with frame & with following specifications all as specified & directed:-(a) window frame 3 track of size 95mmx25mmx1.5mm thick(b) Stiles and rails of size 35mmx25mmx1.5mm(c) 35mmx35mmx1.5mm T section mullion(d) PVC gasket with 4mm thick tinted glass, incl aluminium handles with necessary locking arrangement for 02 Nos glazed shutter.(e) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples incl aluminium handles with necessary locking arrangement for 01 Nos gauzed shutter.Note:- Measurement to be taken as overall width and height of window. No shutter or frame to be measured separately. All necessary accessories including tinted glass and stainless steel wire cloth required for assembling and fixing window at proper place complete are deemed to be inclusive. |
| 25 | S&F ventillators/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frostedglass strips andfollowing aluminium powder coated sections conforming to catalogue of \"JINDAL\" or of equivalent make and rubber beading and all necessary fittings as required etc all as directed.(a) SP20048(b) Glazing clips19352 |
| 26 | S&F pressed steel frame for door made out of MS sheet 1.25mm thick of size 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-1 back of chowkats complete all as specified and directed. |
| 27 | S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed. |
| 28 | M&L Preparing the new steel surfaces of any description over 10cm width or girth priming with red oxide zinc chrome and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 29 | M&L for Preparing wood or wood based new or untreated surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 30 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life. |
| 31 | S&F Solid PVC door frame(Single frame) of size 60mmx30mm made out of solid PVC foam with hmgenous fine cellular stucture having smooth outer integral skin with suitable metal stiffner and fxed with 100x8 sheet etal CSK screw cmplete all as specified and shown on drawing.Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screw holdig strength to fix hinges abnd hold doors properly for a long life). |
| 32 | S&F Factory made Solid PVC Moulded Door Shutterwith wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 33 | S&F 200mm long aluminimum anodised barrel tower bolts of extruded section ISI marked, complete all as specified and directed. |
| 34 | S&F 100mm long stainless steel butt hinges medium weight complete all as specified and directed including necessary welding if required . |
| 35 | S&F Extruded aluminium alloy handles of size 150mm, fabricated type, anodised, complete all as specified and directed. |
| 36 | S & F for 250mm long Stainless steel sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified. |
| 37 | S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anti syphonage pipe etc. and including 110mm bore PVC \"P\" or \"S\" trap complete incl making good to floor complete all as specified and directed. |
| 38 | S&F in repairs vitreous china wash down water closet (pedestal pattern) white including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc. complete all as specified and directed. |
| 39 | S&F for vitreous china wash hand basin (oval shape)whiteof bowl size 550mmx400mm including coupling, waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed. |
| 40 | S&F in repair vitreous china wash hand basin (flat back or angle back type)whiteof bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed. |
| 41 | S&F 20mm dia Gun metal globe or gate valve with iron wheeled head, screwed both ends for iron pipe and fixedcomplete all as specified and directed. |
| 42 | S&F 25mm dia Gun metal globe or gate valve with iron wheeled head, screwed both ends for iron pipe and fixedcomplete all as specified and directed. |
| 43 | S&F in repair pillar tap, cast copper alloy, chromium plated, with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 44 | S&F in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal in back in cement; fixing automatic cistern with brackets, flush pipe, grating and union for discharge pipe, complete all as specified and directed. |
| 45 | S&F in repair PVC connection 15mm bore size with two nuts and washers of length 600mm complete all as specified and directed. |
| 46 | S&F in repair bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed. |
| 47 | S&F bib taps long body, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F pillar tap brass chromium plated fancy type swan neck with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 49 | S&F in repair stop valve/ angle valve (ISI marked),15mm dia, cast copper alloy, chromium plated fancy type screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe, complete all as specified and directed. |
| 50 | S&F 15mm bore angle valve chromium plated screwed downfancy typehigh pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed. |
| 52 | S&F in repairs 10 liters PVC low level flushing cistern (white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm diaflush pipe with coupling and fixed complete all as specified and directed. |
| 53 | S&F in repair 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed. |
| 54 | S&F in repair swivel shower of PTMT any colour for fixing with 15 mm pipe (minimum weight 40 gms) incl shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour (minimum weight 40 gms) complete all as specified. |
| 55 | S&F 20mm bore GI tubing medium grade galvanized ISI marked with all fittings,short pieces and fixed to walls and ceiling or laid in floors as required complete all as specified and directed. |
| 56 | S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings, fixed to walls and ceiling or laid in floors, complete all as specified and directed. |
| 57 | S&F PVC (SWR) pipes single sockets in any length with rubber ring joints laid in trenches or in floors, 110mm bore complete all as specified and directed. |
| 58 | S&F PVC (SWR) pipes single sockets in any length with rubber ring joints laid in trenches or in floors, 75mm bore complete all as specified and directed. |
| 59 | S&F PVC (SWR) bends of 110mm bore any radius complete all as specified and directed. |
| 60 | S&F PVC (SWR) bends of 75mm bore any radius complete all as specified and directed. |
| 61 | S&F in repair Hand Shower (Health Faucet) with 15 mm dia,1.25 m longFlexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed. |
| 62 | S&FRotational moulded polyethylene water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 litre incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts including Dismantling water tanks (capacity of tank exc. 250 ltr but not exc. 500 ltr) and removing from site.complete all as specified and directed. |
| 63 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 litre incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts including Dismantling water tanks (capacity of tank exc. 500 ltr but not exc. 1000 ltr) and removing from site.complete all as specified and directed. |
| 64 | S&F Rotational moulded polyethelyne water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethelyne float and fly nuts and including cast iron gate valve complete all as specified and directed. |
| 65 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 66 | M&L for Chequered cement concrete coloured tiles 300mm x 300 mm x 25 mm thick set and jointed, pointed in neat cement slurry with grey cement and pigment as in floor, Screed bed or bedding layer of 20 mm thick CM (1:6) as in floor, complete all as specified and directed. |
| 67 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 68 | Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry complete all as specified and directed. |
| 69 | S&F machine pressed precast concrete interlocking paver blocks with grey cement and no pigment, any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade complete all as specified and directed. |
| 70 | M&L for 75mm thick PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in sub base/ floor complete all as specified and directed |
| 71 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as sepcified and as directed |
| 72 | S&F in true horizonal level 595x595x8mm false ceiling non asbestos decorative tiles manufactured by V- Board or equivalent including GI snap grid of size (600x600)mm, using hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm having 0.27mm gauge at every 1200mm, centre to centre maximum and rotary stitched cross tee of size 24x 32mm, having 0.25mm gauge at 1200mm c/c. Wall angle of size 19x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI wire. The board to be finished with two coat of OBD over coat of primer to all side all as specified and directed. Make ofgrid Samceil or equivalent as approved by GE. |
| 73 | S&F of Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde-E-165 complete all as specified & directed. |
| 74 | S&F Galvanised, (hot dip) 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed (each line wire to be measured). |
| 75 | Preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 76 | Supply only Chain link MS galvanised fencing of wire mesh size 50 mm x 50 (Nominal pitch of wires), complete all as specified and directed. |
| 77 | Fixing only chain link fencing incl line wires any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. |
| 78 | S&F of MS round bar 10 mm dia as in strands for holding chain link fencing incl hooking etc complete all as specified and directed. |
| 79 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose of soil complete all as specifed and directed. |
| 80 | Excavation in post holes not exceeding 0.50 cum getting out in Hard/dense soil, returning,filling in layers not exceeding 50 mtr and making good surfaces complete all as specified and directed. |
| 81 | S&F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, 5 to 10 mm diameter of shank, complete all as specified and directed. |
| 82 | M&L for Concertina coil securing or tying incl provn of MS wire stapples or steel pins etc complete all as specified and directed. |
| 83 | M&L Prepainted Galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws and overlap with sufficient laps complete all as specified and directed. |
| 84 | M&L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed |
| 85 | M&L for 25 mm thickPCC 1:2:4 type B-0 (using 12.5mm graded aggregate) as in floors etc and finishing the surface even and smooth without using extra cement, complete all as specified and directed. |
| 86 | M&L for 75 mm thick cement concrete (1:3:6) type C-1, using 20mm graded crushed stoneaggregates as in plinth protection in panels, including finishing the surfaces even and fair, complete all as specified & directed. |
| 87 | S&F of 150 mm dia RCC NP-2 pipe laid and jointed complete all as specified and directed. |
| 88 | M&L for cement concrete 1:4:8 type D2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified & directed. |
| 89 | S & F powder coated Anodised aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc. withPowder Coating (minimum thickness of powder coating 50 micron & min weight of member not less than 0.55 kg/Rm), complete all as specified and directed. |
| 90 | S & F Powder coated Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including powder coating of any colour (Thickness or powder coating not less than 50 micron), complete all as specified and directed. |
| 91 | S&F aluminum powder coated partition Pattern approvedby GE using Jindal or equivalent Catalogue Sections DP/SP weight not less than 1.0 kg/RM with frosted glass 5 mm thick and 5 mm thick Aluminum composite panel fixed with glazing clips,Jointing cleats.rubber gasket,neoprene packing, anodised aluminium snap beading screws and complete allas specifed and directed. |
| 92 | S & F Anodised designer grill of 7mm dia fixed with and including flat section of size 50x1.5mm fixed to aluminium window complete all as specified and directed. |
| 93 | M&L for preparation of surfaces by leveling/edging of the disturbed planes/edges of New plastered surfaces of wall by using wall care putty of avg 1 mm thick on vertical surfaces to true vertical and horizontal lines of bricks/concrete walls finish to even and smooth with two layersof screylie wall care putty with two coats of oil bound distemper over one coat ofprimer as on walls surfaces complete all as specifiedand directedcomplete all as specified and as directed. |
| 94 | M&L for newly plastered surfaces of ceiling incl, cornicesand applying two coats ofdistemper oil emulsion incld a coat of primeron ceiling all as spd and directed. |
| 95 | M&L for complete removal of existing treatment of walls and applying external grade wall care putty on the entire surface including filling up undilutions and then sand papering the same to give smooth and even surface when surface is dry and M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/L and UC resistance as per IS 15489:2004 alkali and fungal resistance, dust resistance, water repellant, crack-bridging, weather proof 1st quality exterior paint of required shade with silicon additives @ 1.43 L/10 Sqm and including priming coat of exterior primer applied @ 0.90L/10 Sqm and scaffolding at any height complete all as specified and directed by Engr-in-Charge. Note : - Tint/Shade shall be approved by Engr-in-Charge. |
| 96 | Preparation of new plastered surfaces of walls and Materials & Labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/L and UC resistance as per IS 15489:2004 alkali and fungal resistance, dust resistance, water repellant, crack-bridging, weather proof 1st quality exterior paint of required shade with silicon additives @ 1.43L/10 Sqm and including priming coat of exterior primer applied @ 0.90L/10 Sqm and scaffolding at any height complete all as specified and directed by Engr-in-Charge. Note : - Tint/Shade shall be approved by Engr-in-Charge. |
| 97 | M&L for cement concrete type B-1 (1:2:4) (using 12.5 mm graded stone aggregate) as in surface channels and drains complete all as specifoed and as directed |
| 98 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified & directed. |
| 99 | M&L liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement onfair faces of concreteroof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster). |
| 100 | M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300x300mmx10mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 including demolition/ dismantling old surface/tiles, complete all as specified and directed. |
| 101 | M&L for 75mm thick plain cement concrete type D-2 1:4:8as in Sub base/sub floor in tiles/blocks complete all as spd and directed. |
| 102 | S&F fancy mirror 5 mm thick glass,wall mounted,bevelled, polished of selected quality mounted on 6mm AC building board or commercial plywood and fixed to plugs with chromium plated brass screws and cup washers, design/shape will be approved by Engineer-in-Charge complete all as specified and directed. |
| 103 | Rounding to edges of stone slabs, one edge, such as in steps, cooking platform and other similar situation, complete all as specified and directed. |
| 104 | S&F 75mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. |
| 105 | S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. |
| 106 | S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal. |
| 107 | S&F for 75 mm PVC (SWR) junction single, (Single T) equal or unequal. |
| 108 | M&L for HDPE DWC pipe for 150mm dia (internal) conforming to IS-16098 laying including 100mm thick bedding in PCC type C-2 (using 40mm graded crushed stone aggregate) all as per drawing and jointing of pipe in trenches complete all as spd and directed |
| 109 | S&F mild steel, chromium plated Soap Dish fixed with and incl CP screws all as specified and directed. |
| 110 | M&L Mild steel TMT bars 5mm dia and over cut to length bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 111 | M&L for TMT bars 6 to 8mm dia and over upto and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including bending, cranking etc. and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed. |
| 112 | S&F 32mm bore corrugated PVC waste pipe, complete all as specified and directed. |
| 113 | M&L for cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth, complete all as specified and directed. |
| 114 | Supply and fix Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;l adders; framed balusters; walk ways; railings; framework of water tanks, cattle trap and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 115 | M&L for Reinforced cement concrete M-25 as in Foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 116 | M&L forReinforced cement concrete M-25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 117 | M&L for RCC M-25 as in columns, pillars etc., complete all as specified and directed. |
| 118 | Reinforced cement concrete (design mix) M-25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 119 | M&L for RCC M-25 as in chajjas etc., complete all as specified and directed. |
| 120 | M&L for broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 121 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed. |
| 122 | M&L for Formwork to sides of square or rectangular pillars, posts, struts, columns etc., complete all as specified and directed. |
| 123 | M&L for Formwork to sides and soffits of floor or roof beams,, splays between floor and beamsetc., complete all as specified and directed. |
| 124 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 125 | M&L for Formwork to edges of concrete flats , window cills, floor and roofs n exc 20cm wide, complete all as specified and directed. |
| 126 | M&L for reinforced cement concrete M-20 (Nominal mix) using 20mm crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over1.5m span complete all as specified and directed. |
| 127 | M&L for PCC (1:4:8) type D-2 (using 40mm graded aggregate) in foundation, filling, mass concrete, complete all as specified and directed. |
| 128 | S&F Toilet paper holder with flat recessed type stainless steel including CP screws all as specified and directed. |
| 129 | S&F CP towel ring PTMT fixed with and including Chromium plated brass screws andcleats (min wt 90 gms), complete all as specified and directed. |
| 130 | Surface dressing n exc 15cm deep and getting out in any type of soil complete all as spd & directed. |
| 131 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth in foundation, for laying of cables, pipes etc. and getting out in any type of soil complete all as specified and directed. |
| 132 | Removing excavated soil n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 133 | Removing surplus excavated material from site to a distance exceeding 250m but not exceeding 500 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 134 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 135 | M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified and directed. Note: Punned thickness of sand shall be measured. |
| 136 | Supply and laying sub class \"B\" bricks of old size (230x115x75 mm) or of size locally available ,laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge |
| 137 | Material and labour for replacement of GI tubing light grade 40 mm borefor passing through cables under the floor, along the wall or along the pole complete all as specified and directed . |
| 138 | M & L for drilling suitable dia horizontal bore holes for insertion/laying of upto 50mm bore GI tubing of any description below/under road surface/floors not more than 6 mtr wide etc with using mechanical or manual devices as required at site inlcuding making good distrubed surface to match with the existing strata after laying pipes/cable complete all as specified and directed. |
| 139 | Supply and laying pipe galvanised, \"Medium class\", including fittings 25 mm borecomplete all as specified and as directed. |
| 140 | Supply and laying in replacement of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium conductor, 1100 volts grade of cross sectional area 35 Sqmm 3.5 Core, complete all as specified and directed. |
| 141 | M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, benching, PCC, block for hold fast including all necessary from work complete all as specified and directed. |
| 142 | M&L Providing precast cement concrete 1:2:4 Type B1 using 20 mm graded aggregate, incover slabs (for manholes etc.)set in CM 1:6 complete all as complete and directed. |
| 143 | M&L for cutting in to existing manhole for connecting new drain 150/200/300 mm bore , making good to pipe & rendering cutting out existing benching for & forming branch channel in cement concrete ( 1:2:4) type B1 smooth finished& reforming benching as required complete all as specified and directed. |
| 144 | M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 145 | M&L for septic tank for 50 usres designated to carry sewage and sludge water, including excavation in any type of soil, foundation in PCC 1:2:4, brick workinCM 1:4, RCC Slabcovers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angleironframeVentshaftand sludgechambersetc,complete all as specified, shown on drawings and directed. |
| 146 | M & L for soakage wells 1.8m x 3.0 m in any type of soil including excavation foundation on PCC 1:3:6 walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM,RCC cover slab in M25/SRFC cover,interconnecting pipes of RCC/DWC complete filled with brick bats complete all as spd, shown in drawings and directed. |
| 147 | M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, infloor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 148 | M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, infloor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 149 | Supply, fixing, stringing and drawingsubmain wiring with 2 run of single core, 4 sqmm PVC insulated and unsheathed, multi strandedcopper conductor cable FRLS usingcolour code forphase red and neutral black with and including4 sqmmPVC insulated and unsheathed FRLS conductor multi stranded cable in green colour connected to common earth point and connected to earth dolly drawn through PVC rigid conduit 20 mm bore, heavy grade (ISI marked) with and including all accessories, fixed to surface / recessed complete all as specified and directed. |
| 150 | S&F Modular switch 1 way 6A, 1 module single (ISI marked) complete all as specified and directed. |
| 151 | All as per item No. 165 here-in-after but for one 5 pin 6 Amp socket outlet point on independent board. |
| 152 | S&F Modular Socket, 6A - 2/3 pin combined 2 module, (ISI marked)complete all as specified and directed. . |
| 153 | S&F in replacement of MCB Protected Socket With sheet steel Enclosure single pole 25 Amp with 3 pin plug topfor AC/ Geyser connection from Socket point to stabilizer complete all as specified and directed. |
| 154 | Supply and fixing of LED Lamp 9/10 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed by Engineer- in-Charge. |
| 155 | M&L for ceiling rose 2-3 terminal size 65x20mm, complete all as specified and directed. |
| 156 | Supply and installing of the electric water storage heater of steel body type of 25 ltr capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15 mm dia bore with GI hexagonal adopters/Nuts on the both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangement and mounding wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and directed by Engr-in-Charge . |
| 157 | Supply and fixing of LED lights fitting 1x 20W,minimum 4 feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 158 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 159 | S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers andcomplete all as specified and directed. |
| 160 | S&F High performance IP66 LED Street light 20 watt, housing made of die-cast aluminium, with street optic lens, with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5sqmm from ceiling rose, and 20W LED light etc. drawn through and including 32mm bore GI light grade protection pipe upto 1.0m length with suitable fixing accessories on walls, complete all as specified and directed. |
| 161 | S & FSPN 8 way sheet metal enclosures factory made DB double door 230 V AC, 50 Hz AC 200 Amp rated bus bar complete all as specified and directed |
| 162 | S&F amp rating 240V, 10KA \"B\" curve miniature circuit breaker (MCB) of SPN 5 to 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 163 | S&F amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 164 | M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel includingPCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified |
| 165 | M&L for modular point wiring with 1.5 sqmm (nominal area) PVC insulatedFRLS and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid concealed conduit not less than 1.8 mm thick (ISI marked)with all accessories including suitable modular plate (Inner + Outer) and modular metalic boxes of suitable sizes including 1.5 sqmmPVCFRLS insulated unsheathed copper conductor multistranded cable for continuous earth conductor connectedto common earth dolly, complete all as specified & directed for the following :- Note:- Proper colour coding is to be followed as per IS Specification. |
| 166 | One light point controlled by 5 Amp SP, one way, 240 Volts. |
| 167 | One ceiling/ exhaust fan controlled by 5 Amp SP, one way, 240 Volts. |
| 168 | All as per item No. 166.00 here-in-before but for one 5 pin 6 Amp socket outlet point on same board |
| 169 | Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.(ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum. |
