|
| 1 | S&F of Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde-E-165 complete all as specified & directed. |
| 2 | S&F Galvanised, (hot dip) 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed (each line wire to be measured). |
| 3 | M&L for Cement concrete type B-2, 1:2:4 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc complete all as specified and directed |
| 4 | Cutting of grass, branches etc mannually and cleaning away all grass vetetating saplings shrubs, bush, wood, taking out loose and removing to a distance not less than 500m along the line of fencing from any point of cutting and finally deposited where directed by Engr-in-Charge. |
| 5 | Preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 6 | Supply only Chain link MS galvanised fencing of wire mesh size 50 mm x 50 (Nominal pitch of wires), complete all as specified and directed. |
| 7 | Fixing only chain link fencing incl line wires any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. |
| 8 | S&F of MS round bar 10 mm dia as in strands for holding chain link fencing incl hooking etc complete all as specified and directed. |
| 9 | Excavation in post holes not exceeding 0.50 cum getting out in any type of soil, returning,filling in layers not exceeding25 cm thick and making good surfaces complete all as specified and directed. |
| 10 | S&F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, 11 to 15 mm diameter of shank, complete all as specified and directed. |
| 11 | M&L for Concertina coil securing or tying incl provn of MS wire stapples or steel pins etc complete all as specified and directed. |
| 12 | Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. |
