Construction Of Phase-B Leftover Works At Jnv West Khasi Hills District Meghalaya Civil And Electrical Works
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Feb 2026
0 days left
EMD
1.59 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nongstoin → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Phase-B Leftover Works At Jnv West Khasi Hills District Meghalaya Civil And Electrical Works
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Feb-2026 | Extension of Tender 3 | Date | 11-Feb-2026 |
| 2 | 22-Jan-2026 | Extension of Tender | Date | 09-Feb-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Annexure 1 |
| 2 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 3 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 4 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications |
| 5 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade |
| 7 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)Kiln seasoned and chemically treated hollock wood |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 9 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)Size of Tile 600x600 mm |
| 10 | Providing and fixing 25 mm thick shutters for cup board etc. : 9.16.1 Panelled or panelled & glazed shutters |
| 11 | Fixed window / ventilator with mullion / transom |
| 12 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with |
| 13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge (a) 32 mm nominal dia Pipes |
| 14 | (b) 25 mm nominal dia Pipes |
| 15 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid |
| 16 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge |
| 17 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 18 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 19 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 |
| 20 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 21 | Providing and fixing toilet paper holder |
| 22 | Providing and fixing brass curtain rods ofwall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete(a)25 mm diameter. |
| 23 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications external paint |
| 24 | Supplying fitting and Fixing of syntex 1000 litre |
| 25 | Annexure 2 |
| 26 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.Group B |
| 27 | Group C |
| 28 | Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required |
| 29 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.2 x 1.5 sq. mm |
| 30 | 2 x 2.5 sq.mm |
| 31 | 2 x 4 sq.mm |
| 32 | 2x 6 sq.mm |
| 33 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc, as required.(a) 75 mm x 75 mm x 60 mm deep |
| 34 | (b) 100 mm x 100 mm x 60 mm deep |
| 35 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required5/6 amps switch |
| 36 | 2-way 5/6 A switch |
| 37 | 15/16 A switch |
| 38 | 3 pin 5/6 A socket outlet |
| 39 | 6 pin 15/16 A socket outlet |
| 40 | Supplying and fixing two module stepped type electronic tan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 41 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required |
| 42 | Supplying and fixing following size/ modules, Gl box along with modular base & cover plate for modular switches in recess etc., as required.1 or 2 Module (75 mm X 75 mm) |
| 43 | 3 Module (100 mm X 75 mm) |
| 44 | 4 Module (125 mm X 75 mm) |
| 45 | 8 Module (125 mm X 125 mm) |
| 46 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)(a) 8-way, Double door |
| 47 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required (Note Vertical type MCB TPDB is normally used where 3 phase outlets are required.)(a) 12 way (4+36), Double door |
| 48 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) Single pole |
| 49 | (b) Double pole |
| 50 | Supplying, installing, testing and commissioning of following capacity TPN distribution tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with HRC fuses, interconnections, earthing etc. as required.(a) 63 A TPN, 6 way |
| 51 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required |
| 52 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 53 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM ( tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitablefor 230 V, 50 Hz, single phase AC Supply, earthing, etc., complete as required. |
| 54 | Supplying fitting and fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass holder with LED bulb surface or wall mounted with all necessary accessories(a) Bulb12 W |
| 55 | Supplying fitting fixing of LED Retrofit Lamps surface or wall mounted with all necessary accessories(a) Crystalglass LED tubelight (Double side Connection)20W |
| 56 | Supplying fitting and fixing LED PANEL LIGHTING surface or wall mounted with all necessary accessories(a) SURFACELED flat panel for surface mounting1 x 1 15W (300x300x70)mm |
| 57 | Supplying fitting & fixing exhaust fan double bearing self lubricating type single phase 50Hz 250V AC operated complete with supporting frame, fan blades, nuts and bolts and other petty accessories as required.(a) Domestic Exhaust FansMetal Exhaust Fan 300mm |
AI Tender Summary
Tender Timeline
Feb 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Feb 09, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender