|
| 1 | FORM WITH OUT BACK, and with back Drg No.FD- 77 (M), 1027(a) Material and labour for weldingin repairs to broken places n.exc 50 mm and smoothing the welding complete all as specified and as directed. |
| 2 | (b) Taking out unserviceable leg and supply and fixing newleg made oflegs of form without back made of 25mm square pipe 1.6mm thick in proper size, duly welded to main frame complete all as shown and specified on drg. |
| 3 | ( c ) Supply and fixing in replacement of seat plank of form without back made of 1900/1800 x 255 x 25 mm thick of Ist class Hardwood Shisham wood duly wroughted finished with existing shape and fixed with nut, bolt and washer and applying french polishing on all exposed surfaces wooden surfaces including cleaning and preparation the surface including a coat of wood filler with one coat of french polish complete all as specified, shown on drg and as dircted. |
| 4 | REPAIR TO HAT STAND WITH MIRROR, Drg No.FD- 233, 362 (a) Removing the existing unserviceable pegs of Hat Stand and supply & fixing new brass peg of best quality, complete all as specified,shown on drawing and as directed. |
| 5 | (b) Removing the existing unserviceable back ply of hat stand and supply and fixing new back ply madeof 6mm thick commercial ply BWR type made to shape, fixed in position Complete all as specified,shown on drawing and as directed. |
| 6 | (c ) Removing the existing unserviceable beading and supply and fixing new beading of 6 x 35 mm thick teak wood alround the hat stand,complete all as specified,shown on drawing and as directed. |
| 7 | (d) Removing the existing unserviceable mirror, supply and fixingwith new 5 mm thick mirror of proper size, rest all as shown and specified on drg. |
| 8 | STOOL DRESING CB, FD-27, 252, 282(a) Dismantling / taking out carefully existing broken parts of stool dressing CB and supply & fixing new partsas shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directedas follows :- |
| 9 | (b) Teak wood legs |
| 10 | (c ) Teak wood long rail |
| 11 | (d ) Teak woodshort rail |
| 12 | (e) Teak wood stiffener (Side/ Centre) |
| 13 | (f) Recanning of repaired stool dressing CB with best quality of approved plastic cane 2 mm wide and 0.4 mm thick of white in colour complete all as specified , directedand shown on drawing. |
| 14 | TABLE STEEL 900MM X 900MM X 760 MM, Drg No. FD - 1009 (a) Material and labour for welding to broken places not exceeding50 mm and smoothing the weldingcomplete all as specified and directed. |
| 15 | (b) Taking out unserviceable legs and supply & fixing with new Legs made of 25mm sq pipe 1.6mm thick as per size and shape as shown on drg complete all as specified and directed. |
| 16 | (c ) Taking out unserviceable long rail and supply & fixing with new long rail 25 mm sq Pipe 1.6mm thickas per size and shape as shown on drg complete all as specified and directed. |
| 17 | (d ) Taking out old unserviceable table top and supply and fixing new top made out of 18 mm thick prelaminated board, exterior grade, grade I,ISI marked, duly fixed with 6mm thick first class teak wood beading allround duly polished complete all as specified, shown on drawing and directed. |
| 18 | TRESTLE STORE ROOM STEEL 2440MM X 660MMX 300MM (FD-1043 (a)Material and labour for denting old chipped surface and preparing the groundwith putty and applying spray painting with one coat of synthetic enamel paint of olive green shade to old steel surfaces complete all as specified and directed. |
| 19 | TRESTLE STORE ROOM WOODEN (DB-418)(a) M&L for replacement of the following existingold/broken/ unserviceable parts of trestle store room wooden made out of Ist class hard wood (Sal)to shape as per drg incl apply the creosote oil complete parts after finishing complete all as specified & directed and shwon in drgs. |
| 20 | (b) Long rail of trestle store room wooden size 4\"x 4\" x 96\" |
| 21 | (c) Centre rail of trestle store room wooden size 4\"x 3\" x 24\" |
| 22 | (d) Centre Stiffner of trestle store room wooden size 4\"x 3\" x 18\" |
| 23 | (e) Legs of trestle store room wooden size 4\"x 4\" x 15\" |
| 24 | TABLE OFFICE OFFICER STEEL, Drg No. FD- 84 (M), 1003 (a) Material and labour for welding to broken places not exceeding50 mm and smoothing the weldingcomplete all as specified and directed. |
| 25 | (b)Taking out unserviceable legs and supply & fixing with new Legs made of 25 mm Sq pipe 1.6 mm thick as per size and shape as shown on drg complete all as specified and directed. |
| 26 | (c) Taking out unserviceable long rail and supply & fixing with new long rail 25mm Sq pipe 1.6 mm thickas per size and shape as shown on drg complete all as specified and directed. |
| 27 | (d)Taking outold unserviceable drawer and supply and fixing new drawer made of 1mm thick PBI sheet as per size and shape as shown on drg complete all as specified and directed. |
| 28 | (e) Taking out unserviceable lock and supply & fixing with new MS body six lever lock with duplicate key of approved quality complete all specified and directed |
| 29 | (f) Taking outold unserviceable handle and supply and fixing new PVC handle with steel coveras per size and shape as shown on drg complete all as specified and directed. |
| 30 | (g ) Taking out old unserviceable table top and supply and fixing new top made out of 18mm thick prelaminated MDF board, exterior grade, grade I,ISI marked, duly fixed with 6mm thick first class teak wood beading allround duly polished of size 1680 x 870mm complete all as specified, shown on drawing and directed. |
| 31 | ( h) Supply and fixing in replacement shoe of Table office officer steel with new hard rubber/PVC shoe superior quality, complete all as specified, shown on drawing and directed. |
| 32 | Table 3\" x 2\" with out drawer FD-284,FD-42 (a) Dismantling existing unserviceable top and providing new top table 3\"x2\" of size 900x600x18/19mm made of prelaminated Particle board exterior grade in teak shade flat pressed three layertype BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded duly French polished,all as specified and shown on drg. |
| 33 | (b) Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood of size 742 x 60 x 60 mm at top and 30 x 30 mm at bottom duly French polished,complete all as specified and shown on drg . |
| 34 | (c )Removing unservicable long rail and S & F of new long rail made of 1st class seasoned teak wood of size 25 mm x 65mmin section duly french polished, all as specified and shown on drg. |
| 35 | (d )Removing unservicable short rail and S & F of new short rail made of 1st class seasoned teak wood of size 25 mm x 65mmin section duly frenceh polished, all as specified and shown on drg. |
| 36 | (e) Removing unservicable stiffener and S & F of new stiffner made of 1st class seasoned teak woodduly french polished,all as specified and shown on drg. FD-284 ,FD-42 |
| 37 | (f) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed. FD-284 ,FD-42 |
| 38 | (g)S&F wooden corner cleat made of 1st class seasoned teak wood to strengthen long rails and legs duly french polished, |
| 39 | Table 3\" x 2\" with drawer FD-283 ,FD-41 (a) Dismantling existing unserviceable top and providing new top table 3\"x2\" of size 900x600x18/19mm made of prelaminated Particle board exterior grade in teak shade flat pressed three layertype BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded duly French Polished, all as specified and shown on drg. |
| 40 | (b) Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood of size 742 x 60 x 60 mm at top and 30 x 30 mm at bottom duly French Polished, complete all as per drg . |
| 41 | (c ) Removing unservicable long rail and S & F of new long rail made of 1st class seasoned teak wood of size 25 mm x 65mmin section duly French Polished, all as specified and shown on drg. |
| 42 | (d ) Removing unservicable short rail and S & F of new short rail made of 1st class seasoned teak wood of size 25 mm x 65mmin section duly French Polished, all as specified and shown on drg. |
| 43 | (e ) Removing unservicable drawer and S & F of new drawer made of 1st class seasoned teak wood and 6 mm thick plywood BWR duly French Polished, including chromium plated knob. Rest all as specified and shown on drg. |
| 44 | (f )Removing unservicable stiffener and S & F of new stiffner made of 1st class seasoned teak wood duly French polished, all as specified and shown on drg. |
| 45 | (g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed. |
| 46 | (h) S&F wooden corner cleat made of 1st class seasoned teak wood to strengthen long rails and legs duly French polished. |
| 47 | Peg Table FD-277/FD-236 (a) Dismantling of old and unserviceable top and providing new top made of pre laminated Particle board exterior grade 18/19 mm thick BWR including 6 mm thick teak wood beading all round all as specified and directed. |
| 48 | (b) Replacement of unserviceable legs with new legs made of 1st Class seasoned teak wood duly french polished,as per drg. |
| 49 | (c)Replacement of unserviceable short rail with new short rail made of 1st Class seasoned teak wood duly french polished, as per drg. |
| 50 | (d)Replacement of unserviceable long rail with new long rail made of 1st Class seasoned teak wood duly french polished,as per drg. |
| 51 | (e) Replacement of unservicable stiffeners with 1st class seasoned teak wood duly french polished, as per drg. |
| 52 | (f) S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs duly french polished. |
| 53 | (g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed. |
| 54 | TABLE DINNING OR’s, Drg No. FD-165(a) Material and labour for welding to broken places not exceeding 25mm and smoothing the welding, complete all as specified and directed. |
| 55 | (b ) Taking out unserviceable legs and supply & fixing with new Legs made of 25mm sq pipe 1.6mm thick as per size and shape as shown on drg complete all as specified and directed. |
| 56 | (c ) Taking out unserviceable long rail and supply & fixing with new long rail 25mm sq pipe 1.6mm thickas per size and shape as shown on drg complete all as specified and directed. |
| 57 | (d) Taking out unserviceable shortrail and supply & fixing with new long rail 25mm sq pipe 1.6mm thickas per size and shape as shown on drg complete all as specified and directed. |
| 58 | (e) Taking out old unserviceable table top and supply and fixing new top made of 18mm thick prelaminated MDF board, exterior grade, grade I, with 22 gauge aluminium sheet of top, complete all as specified,shown on drawing and directed. |
| 59 | (f) Supply and fixing in replacement shoe oftable dining ORs with new hard rubber/PVC shoe superior quality, complete all as specified, shown on drawing and directed. |
| 60 | Table 90 x 60 cm(3\" x 2 \")for Havs & ORs steel FD-1007/Similar Pattern.(a) Removing unserviceable top and S & F new top made out of 18/19 mm prelaminated MDF board exterior grade of shape and size with 6 mm teak wood beading all around as shown in drg. |
| 61 | (b) Taking outunserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drg. |
| 62 | (c) Removing of unserviceable short rail/siffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg. |
| 63 | (d) Removing of unserviceable long rail/long siffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg. |
| 64 | (e) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing FD-1007/Similar Pattern. |
| 65 | REPAIR TO TABLE DRESSING GENTS, DRG No. FD-230/379(a) Taking out old unserviceable mirror of table dressing gents and supply and fixing new mirror of size 380mm x 760mm, 5mm thick of approved quality, complete all as specified, shown on drawing and as directed. |
| 66 | (b) Taking out old unserviceable back ply of mirror and supply and fixing new6 mm thick plywood BWR for back of mirror of table dressingcomplete all as specified, shown on drawing and as directed. |
| 67 | (c ) Taking out old unserviceable front drawer from table dressing gents and supply and fixing new front drawer of existing size made out of 18mm thick prelaminated particle board both side teak face laminated exterior grade with 6mm thick teak wood beading alround, shown on drawing and as directed. |
| 68 | (d) Taking out old unserviceable back from table dressing gents and supply and fixing back made of 12 mm thick Ist class HW (Shisham) plank including key plate and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat primer, complete all as specified, shown on drawing and as directed. |
| 69 | (e) Taking out old unserviceable top/ bottom from table dressing gents and supply and fixing new top / bottom of table dressing gents made out of 18 mm thick pre-laminated MDF board with both side lminated teak face including 6 mm thick teak wood beading, complete all as specified, shown on drawing and as directed. |
| 70 | (f) Taking out old unserviceable Clamp and supply and fixing new clamp all as shown on drawing, complete all as specified, shown on drawing and as directed. |
| 71 | (g) Taking out old unserviceable knob and supply and fixing chromium plated knob 25mm dia and 24mm long, complete all as specified, shown on drawing and as directed. |
| 72 | Table bed side FD-276 (a)Taking out unservicable top of table bed side and providing new top of Prelaminated Particle board exterior grade 18/19 mm thick BWR grade of same size and shape as shown in drg. |
| 73 | (b) Taking out unservicable sides of table bed left and right side and providing new sides of Prelaminated Particle board exterior grade 18/19 mm thick BWR gradeof same size and shape as shown in drg. |
| 74 | (c) Taking out unservicable shelf of table bed side and providing new shelf of Prelaminated Particle board exterior grade 12 mm thick BWR grade of same size and shape as shown in drg. |
| 75 | (d) Replacement of unserviceable bottom and providing new bottom made of prelaminated Particle board exterior grade 18/19 mm thick BWR of the same shape and size complete all as specified and shown on drg. |
| 76 | (e) Taking out old ply from the back and providing new commercial ply wood 6 mm thick confirming to IS: 303 BWR grade all as specified and shown in drg. |
| 77 | Locker Bed Side FD-1029/ FD-562(a)Removing unserviceable handleand S & F CP handle 100 mmas per drg. |
| 78 | (b) Removing unserviceable hasp and staple and S&F new hasp and staple chromiun plated as directed. by Engr in Charge. |
| 79 | (c ) Taking outunserviceable hinges S&F new hinges 75mm size as per drg. |
| 80 | (d) Taking outunserviceable legs S&F new legs made out of 1 mm MS sheet as per drg. |
| 81 | (e) Taking outunserviceabled shelves and S&F new shelve made out of 1mm MS sheet as per drawing. |
| 82 | (f) Taking outunserviceabled shutters and S&F new shutters made out of 1mm MS sheet as per drawing. |
| 83 | (g) Taking outunserviceable conduit pipeand S&F new conduit pipe 20 mm dia of 1.6 mm thick MS CP as per drawing. |
| 84 | Table office Clerk Steel FD-84/1004 (a)Removing unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 6 mm thick teak wood beading all around as shown in drg. |
| 85 | (b) Taking outunserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing. |
| 86 | (c) Removing unserviceable locks of drawer and S&F brass locks of any type5 lever as per drg. |
| 87 | (d) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing . |
| 88 | Charpoy GI/IP withplywood topFD-220,FD/MAP-II/01/ similar pattern. (a) Removing of unserviceable old plywoodfrom charpoy tightening of loose components of (i.e. complete charpoy), S&F plywood of required size12 mm thick BWR grade ISI marked confirming to IS: 303 with mild steel galvanised iron nuts and bolts of required size and suitable length.welded over the long rails. 14 Nos of semi circular top bolt of 6 mm dia 75 mm long and nut with steel washers to be used for fixing of plywood top including drilling holes complete all as directed. |
| 89 | (b)Removing of unservicable long rail andS & F new long rail of GI trubing 32 mm bore medium grade (ISI marked) duly threaded both ends all as per drg. |
| 90 | (c) Removing of old unserviceable short railand making of 2 Nos short rails from long rails obtained from item No. 17.1 (b) and threading the both ends of short rails and fixing in position complete. |
| 91 | (d) Removing of old unserviceable legs and making of 2 Nos legs from short rails obtained from item No. 17.2 (c) and threading the both ends of legs and fixing in position complete. |
| 92 | (e Removing of unserviceable 3 way elbow and S & F new GI elbow 32 mm dia ISI Marked as per drawing. |
| 93 | (f) Removing of unserviceable check nuts and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) all as per drawing. |
| 94 | (g) Removing of unserviceable Caps and S & F new 32 mm dia GI CapsISI Marked welding toGI Legsall as per drawing. |
| 95 | (h)Removing old UNSV.flat iron of Charpoy GI pipe and providing safe stiffener offlat iron900mmx25mmx5mm andduly painted with two coat black of colour synthetic enamel paint over a coat of red oxide primer completed all as specified and as directed. |
| 96 | (j)Removing old UNSV. MS tube of Charpoy IP/MAP and providing safe stiffener of MS tube 900mmx 25mmx25mmx1.6 gauge duly painted with two coat ofblack colour synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 97 | Tableoffice clk wooden FD -33(M)(a) Dismantling existing unserviceable top and providing new top of table office clk wooden as per existing size and shape made out of hard teak wood planks Ist class as shown on drg dulypolishedcomplete as specified and directedandshown on drg |
| 98 | (b) Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood of size 742 x 60 x 60 mm at top and 30 x 30 mm at bottom duly French polished,complete all as per drg above. |
| 99 | (c ) Removing unservicable long rail and S & F of new long rail made of 1st class seasoned teak wood of size 25 mm x 65mmin section duly french polished, all as specified and shown on drg above |
| 100 | (d ) Removing unservicable short rail and S & F of new short rail made of 1st class seasoned teak wood of size 25 mm x 65mmin section duly french polished, all as specified and shown on drg. |
| 101 | (e) Removing unservicable stiffener and S&F of new stiffner made of 1st class seasoned teak woodduly french polished,all as specified and shown on drg. |
| 102 | (f) Replacement of unserviceable drawer of table office clk wooden and supply and fix new drawer made out of Ist class teak wood as per existing size and shown on drg. |
| 103 | Tableoffice Officerswooden FD -34(M)(a) Dismantling existing unserviceable top and providing new top of table office officerswooden as per existing size and shape as shown on drgand shape made out of hard teak wood planks Ist class duly polishedcomplete as specified and directed andshown on drg |
| 104 | (b) Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood of size 742 x 60 x 60 mm at top and 30 x 30 mm at bottom duly French polished,complete all as per drg above. |
| 105 | (c ) Removing unservicable long rail and S & F of new long rail made of 1st class seasoned teak wood of size 25 mm x 65mmin section duly french polished, all as specified and shown on drg above |
| 106 | (d ) Removing unservicable short rail and S & F of new short rail made of 1st class seasoned teak wood of size 25 mm x 65mmin section duly french polished, all as specified and shown on drg. |
| 107 | (e) Removing unservicable stiffener and S&F of new stiffner made of 1st class seasoned teak woodduly frence polished,all as specified and shown on drg. |
| 108 | (f) Replacement of unserviceable drawer of table office officerswooden and supply and fix new drawer made out of Ist class teak wood as per existing size and shown on drg |
| 109 | FORM WITHBACK, Drg No.FD- 77 (M),(a) Material and labour for weldingin repairs to broken places n.exc 50mm and smoothing the welding complete all as specified and as directed. |
| 110 | (b) Taking out unserviceable leg and supply and fixing newl made out of 25mm square pipe 1.6mm thick in proper size, dully welded to main frame complete all as shown and specified on drg. |
| 111 | (c ) Supply and fixing in replacement of seat plank of form with back made of 1900/1800 x 255 x 25 mm thick of Ist class Hardwood Shisham wood duly wroughted finished with existing shape and fixed with nut, bolt and washer and applying french polishing on all exposed surfaces wooden surfaces including cleaning and preparation the surface includind a coat of wood filler with one coat of french polish complete all as specified, shown on drg and dircted. |
| 112 | (d ) Supply and fixing in replacement of backplank of form with back made of 1875/1775 x 255 x 25 mm thick of Ist class Hardwood Shisham wood duly wroughted finished with existing shape and fixed with nut, bolt and washer and applying french polishing on all exposed surfaces wooden surfaces including cleaning and preparation the surface includind a coat of wood filler with one coat of french polish complete all as specified, shown on drg and dircted. |
| 113 | (e) Supply and fixing in replacement ofshoeform without back with new Hard PVC shoe of superior quality as specified and shown on drg. |
| 114 | Repairs to Computer table FD/E6/MAP/03 (a) Removing of u/s top and S&F new top of prelaminated MDF board exterior grade 18mm thick Grade-I, Type-II exterior grade of appproved make (Covered with 4mm thick teak wood/PVC beading duly polished) of existing shape & size complete to match the original as shown on drg and as directed |
| 115 | (b) Removing of u/s side and S & F new side of prelaminated MDF board exterior grade 18 mm thick grade-I, type-II, exterior grade of approved make of existing shape & size complete to match the original as shown on drg and as directed |
| 116 | (c)Removing of Broken/u/s keyboard and S&F new key board of prelaminated MDF board exterior grade with sliding arrangement /telescopic rails both sides of key board of existing shape & size complete to match the original as shown on drg and as directed |
| 117 | (d) Removing of u/s drawer & S&F new drawer with sliding arrangement/ telescopic rails both sides of drawer including of 4 lever lock as per Godrej pattern of existing shape & size complete to match the original as shown on drg and as directed |
| 118 | (e) Removing of u/s base/bottom cabinet and S&F of new bottom cabinet of 18mm thick pre- laminated MDF board exterior grade 18mm thick grade-I, type-I of existing shape & size complete to match the original as shown on drg and as directed |
| 119 | M&L for Repairing and applying two coat of mallamine polishing with spray machine after removing of existing polish and smothening of surface wherever required or as directed by AGE (I) Lansdowne to the following furniture articles all are of MES pattern viz FD/DB/FD/MAP series or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and shown on drgs and as directed.Note : Work will be executedatMilitary Station Lansdowne where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of AGE(I) Lansdowne.including BSO\"s Furniture Yard as directed by Engineer-in-Charge. |
| 120 | (a) HAT STAND WITH MIRROR, Drg No.FD- 233, 362 |
| 121 | (b) STOOL DRESING CB, FD-27, 252, 282 |
| 122 | (c )Table 3\" x 2\" with out drawer |
| 123 | (e) Table 3\" x 2\" with drawer |
| 124 | (f) Peg Table |
| 125 | (g) TABLE DRESSING GENTS, DRG No. FD-230/379 |
| 126 | (h) Table bed side |
| 127 | Preparation of all exposed surface of following items (in side & outside)including carrying out repairs such as necessary denting wherever required and applying one or more coat of synthetic enamel paint (hemotone / Sliver grey in front side and light / TA grey inside as approved) with Spray painting over a coat of red oxide primer and filler (putty) wherever required,complete all as specified , directedand shown on drawing. |
| 128 | (a) FORM WITH OUT BACK, and with back Drg No.FD- 77 (M), 1027 |
| 129 | (b ) TABLE STEEL 900MM X 900MM X 760 MM, |
| 130 | (c) TABLE OFFICE OFFICER STEEL, Drg No. FD- 84 (M), 1003 |
| 131 | (d) Table 90 x 60 cm(3\" x 2 \")for Havs & ORs steel |
| 132 | (e) Locker Bed Side |
| 133 | (f) Table office Clerk Steel |
| 134 | (g) TABLE DINNING OR’s, Drg No. FD-165 |
