|
| 1 | Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc for for shafts, wells cesspits, manholes, piers holes laying of cables/ pipes etc not exceedin 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in loose/soft soil etc, complete all as specified and directed. |
| 2 | Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point, complete all as specified and directed. |
| 3 | Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25 cm thick in soft/loose soil, complete all as specified and directed. |
| 4 | M&L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface, complete all as specified and directed. |
| 5 | M&L for PCC 1:4:8 type D2 using 40mm graded aggregates in foundation filling and mass concrete as in lean concrete, complete all as specified and directed. |
| 6 | M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 7 | M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed. |
| 8 | Material and labor for PCC type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in sub base floor and plinth protection incl even and smooth without using extra cement, complete all as specified and directed. |
| 9 | M&L for 50mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub base for floor etc. complete all as specified and directed. |
| 10 | M&L for use and waste of Formwork in rough finished surface to roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, in rough finish of concrete surface etc. complete all as specified and directed. |
| 11 | M&L for RCC (Type B1 (1:2:4 using 20mm graded aggregate in nominal mix) for Beams, cantilevers, bressummers, lintels over 1.5m span etc. complete all as specified and directed. |
| 12 | M&L for Reinforced cement concrete Type M 25 (design mix) (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concret, complete all as specified and directed. |
| 13 | M&L for Reinforced cement concrete Type M 25 (design mix) (20mm graded aggregate) in Columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 14 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surface complete all as specified and directed. |
| 15 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete, square, rectangular or polygonal in shape, complete all as specified and directed. |
| 16 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 17 | M&L for Reinforced cement concrete Type M 25 (design mix) (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed. |
| 18 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 19 | All as per Srl item No. 18.00 above but 6mm to 8mm dia, complete all as specified and directed. |
| 20 | All as per Srl item No. 18.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed. |
| 21 | M&L for Non - skid coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed over screed bed of 15mm thick in CM 1:4 with neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. |
| 22 | M&L for Glazed ceramic tiles coloured 300mm x 450mm/ 600mm x 450mm, 6 to 7mm thick as in skirting/ dado, set and jointed over rendering of 10mm thick in CM 1:4 in and pointed in white or colour cement to match etc. complete all as specified and directed. |
| 23 | S&F Anodised alumiuium frame for window, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 24 | S&F Anodised aluminium window and ventilator shutters, fixed/ sliding/ top hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws all complete as per architechtural drawings and the directions of Engineer-in-charge |
| 25 | S&F 3mm thick sheet figured glass, pin head type and glazing with oil putty/ neoprene gasket in squares in exc 0.5 Sqm in each pane etc. complete all as specified and directed. |
| 26 | S&F Aluminium Wire netting of 1.4mm dia fixed with tinned tacks/ staples with mesh size of 25mm complete all as specified and directed. |
| 27 | M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 28 | M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surfaces with using WPC and finishing the surfaces even and smooth without using extra cement. (WPC will be measured and paid separately) |
| 29 | M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement. |
| 30 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 31 | M&L for preparing new plastered surface of wall surface and applying two coats of oil bound distemper wash etc complete all as specified and directed. |
| 32 | M&L for preparation of newly plastered surfaces and applying two coat of Acrylic emulsion with roller over applying minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed. |
| 33 | M&L for preparation of newly plastered surfaces and applying two coat of interior acrylic emulsion with roller over applying minimum 1mm thick white wall care putty at ceilings over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed. |
| 34 | M&L for preparation of newly plastered surfaces and applying two coat of exterior texture paint with roller over applying minimum 1mm thick white wall care putty at walls/ ceilings over prepared surface to achieve the surfacefor painting complete all as specified and directed. |
| 35 | S&F facfory made single extruded WPC (Wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhats size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibres (wood fibre/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with minter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawl strength of 2200N (Face) & 1100N (Edge), minimum compressive strength 58N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A catagory with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS holdfast/ lugs/ ss dash fastners of required dia and length complete all as specified and directed. |
| 36 | S&F Facory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonateand natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kgs/cum and screw withdrawl strength of 1800N (Face) & 900N (Edge), minimum compressive strength 50N/mm2, modulus of elasticity 850N/mm2 and resistance to sread flame of class A catagory with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with SS but hinges of required size with necessary full body threaded star headed countersunk SS screw, complete all as specified and directed. |
| 37 | S&F stainless steel butt hinges 100mm long, heavy weight fixed complete all as specified and directed. |
| 38 | M&L for steel work in square hollow sections as in truss work including special shaped washer etc complete using ERW, complete all as specified and directed. |
| 39 | M&L for two coats of synthetic enamel paint over a coat over redoxide primer on new steel surface of any description over 10 cm in width or girth not other wise described including prepartion surface complete all as specified and directed. |
| 40 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 41 | S&F Vitreous china, wash down water closet pan (pedestal pattern) single piece, white/ coloured, including vitreous china flushing cistern, plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed. |
| 42 | S&F tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed. |
| 43 | S&F bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15mm dia bore pipe complete all as specified and directed. |
| 44 | S&F stop valves/ angle valves fancy type chromium plated brass cast copper (Concealed type) alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15mm dia bore pipe complete all as specified and directed. |
| 45 | S&F two way angle valves with wall flange fancy type chromium plated brass cast copper (Concealed type) alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15mm dia bore pipe complete all as specified and directed |
| 46 | S&F PVC connection of 60 cm length including brass nuts complete all as specified and directed. |
| 47 | S&F PVC (SWR) floor trap, plain with grating 100mm/ 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proof treatment complete all as specified and directed. |
| 48 | S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement etc complete all as specified and directed. |
| 49 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 50 | Supply and fix PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 51 | S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and directed. |
| 52 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified and directed. |
| 53 | S&F 110mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and directed. |
| 54 | Supplying and laying of 20mm dia GI tubing medium grade with all fittings layed in trenches complete all as specified and directed. |
| 55 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. |
| 56 | S&F rotational moulded PVC water storage tank 1000ltrs capacity conforming to IS-12701 (1989) cylindrical vertical type double-layered with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part-I etc complete all as specified and directed. |
| 57 | Supply and fix 20mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass pipe complete all as specified and directed. |
| 58 | S&F Vitreous China urinals, rectangular type (51.20 x 26 x 28 cm), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe, CP urinal spreader push type cock, trap and waste pipe etc. complete all as specified and directed. |
| 59 | S&F Vitreous China wash basin under counter type Oval/ rectangular shape size 610 x 460mm excluding ditto but including brackets etc. complete all as specified and directed. |
| 60 | S&F Pillar taps of Chromium plated high pressure screwed for iron pipe and fixed complete all as specified and directed. |
| 61 | S&F CP gratings 100mm dia complete all as specified and directed. |
| 62 | Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid (Frame work) etc complete all as specified and directed. |
| 63 | Providing precast cement concrete Type B1 1:2:4 (using 20mm graded stone aggregate) for manholes and similar articles incl formwork complete all as specified and directed. |
| 64 | M&L for 150mm dia salt galzed stone ware (SGSW) drain pipe, grade \"A\" laid in trenches and jointed complete all as specified and directed. |
| 65 | M&L for cement concrete 1:3:6 type C-2 for 150mm dia in bed to drain pipes including packing under, and haunching against the sides of pipes etc complete all as specified and directed. |
| 66 | S&F in repair 5.5mm thick looking mirror of rounded edge at each mirror of selected quality glass without frame, mounted/ fitted to wall projected stainless steel studs and ss screws (4 No\"s on each glass) complete all as specified and directed. |
| 67 | S&F CP Bib taps top lever(superior quality), cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 68 | M&L for granite (of any type) stone slab 18-20mm thick (table rubbed and polished), in skirting, Kitchen platform/ dado etc laid over 20mm screed bed in CM 1:4 jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed. |
| 69 | M&L for Pre-cast cement concrete (1:2:4) type B-1 using 20mm graded stone aggrgates) set in CM 1:4 as in landing, cover slab (for manholes etc) chulla hoods, chajjas, water trough, mangers, shelves and similar article with plain faces including form work complete all as specified and directed. |
| 70 | M&L for granite (of any type) stone slab 20 mm thick (table rubbed and polished) as in partition on walls for urinals etc fixed in walls by making grooves (min depth 50mm) on wall and fix slabs and in CM 1:3 or by using adhesive and match the joints with pigments to match the shade of granite stone including grinding the edges half round and polishing including etc, complete all as specified and directed. |
| 71 | S&F of steel work in tubular trusses purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed. |
| 72 | S&F plain galvanised mild steel sheeting thickness 0.63mm in ridges, hips valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 73 | M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 74 | M&L for Formwork rough finished surface to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and directed. |
| 75 | Excavating over areas, n exc 1.5 m deep and getting out in soft and loose soil, complete all as specified and directed. |
| 76 | Excavating over areas, exc 1.5 m deep and getting out in soft and loose soil, complete all as specified and directed. |
| 77 | All as per Srl Item No. 76.00 above but for each additional 1.5m or part thereof in depth beyond the first 1.5 m for soft and loose soil etc complete all as specified and directed. |
| 78 | M&L for Brickwork with fly ash bricks (old size) in one brick thick honey-comb walling, built in Cement morter 1:4 etc complete all as specified and directed. |
| 79 | M&L for Providing precast cement concrete type B1 1:2:4 using 20mm graded aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM 1:6 like etc complete all as specified and directed. |
| 80 | M&L for Loose filling with broken brick aggregates of gauge 80 to 150mm in soakage pits, soakage wells. |
| 81 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed |
| 82 | S&F sand cast 100m dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to trenches or in floors etc. |
| 83 | S&F CI cowl 100mm dia complete all as specified and directed. |
| 84 | M & L for Plain cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate as in concrete bed including packing under & haunching against sides ofbore pipes after the pipe are laid and tested for 150mm complete all as specified and directed. |
| 85 | M&L for SGSW pipes 150mm dia grade \"A\" laid in trenches and jointed complete all as specified and directed. |
| 86 | M&L for Cutting salt-glazed stoneware drain pipe of 150mm in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar l:l etc complete all as specified and directed.. |
| 87 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil |
| 88 | M&L for 75mm thick cement concrete (1:4:8) type D-2 with using 40mm graded stone aggregates) as in sub base of flooing etc complete all as specified and directed |
| 89 | Providing and laying 60mm thick factorymade chamfered edge cement concrete paverblock of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method usingPU mould, laid in required colour & patternover and including 50mm thick compactedbed of fine sand, compacting and properembedding/ laying of inter locking paverblocks into the sand bedding layerthroughvibratory compaction by using platevibrator, fillingthe joints with sand andcutting of paver blocks as per required sizeand pattern, finishing and sweeping extra |
| 90 | M&L for providing pre cast cement concrete type B1 (|1:2:4) 20mm graded stone aggregate) solid block in kerb stone edging etc (of any spcification) with plain fair faces incl chambers watering throathings etc setting in cement mortar 1:6 with joints to match complete all as specified and directed. |
| 91 | M&L for Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dollyincluding modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:- |
| 92 | (a)One light/ fan/ bell controlled by one, one way switch 5/6 Amp |
| 93 | (b)One 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch |
| 94 | (c)One 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 5/6 Amps switch |
| 95 | M&L for Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dollyfor one three pin 15/16 Amps socket out-let point on an independent board including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size and making good disturbed surface of walls and floors etc. complete all as specified and directed.Note:- Make of GI flush box should be same with switch/ socket. |
| 96 | S&F for Ceiling rose, surface bakelite with three terminals ISI marked, AC, 50 HZ, 230V |
| 97 | S&F modular switch 1 way 6 A, 1 module complete all as specified and directed. |
| 98 | S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. |
| 99 | S&F switch modular type 16 A, 1 module complete all as specified and directed. |
| 100 | S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed. |
| 101 | S&F lamp holder insulated body with back plate for batten fittings complete all as specified and directed. |
| 102 | Supply and fixing Inverter LED batten 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 3 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified and directed. |
| 103 | S&F for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed. |
| 104 | S&F LED inverter bulb of 9 watt, Of base B-22, lm 700, col tamp 6500 K suitable for fixing in lamp holder complete all as specified and directed. |
| 105 | S&F Surface/ Recessed mountedLED panel 15 W, slim, compact round LED panel of 15 W plastic body with premium diffuser to ensure glare free & even distribution of light complete all as specified and directed. |
| 106 | Supply & Fixing plastic body exhaust fan, AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed incl making/ alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces. |
| 107 | Supply & Fixing DB with single phase & neutral MCB Distribution Box of 6/8 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed. |
| 108 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning.complete all as specified and directed. |
| 109 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. complete all as specified and directed. |
| 110 | Sppply & Laying XLPE insulated, armoured, electric cable of size 10 Sqmm 2 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands& making necessary connection complete all as specified and directed. |
| 111 | Supply laying and jointing GI pipe \"light grade\" 40mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables including fittings complete all as specified and directed. |
| 112 | M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. Note : Punned thickness 18 cm shall be measured only. |
| 113 | Supply and laying sub class \"B\" bricks laid dry and flat across the length of cable for protection of cable including taking down old/ broken bricks complete all as specified and directed. |
| 114 | Supply and Laying only, jointing & testing for 25mm bore galvanized steel water tubes, \"medium grade\", galvanized with new fittings & accessories such as Tee, elbow, bend, socket, reducer etc, laid in trenches including taking out old/ unserveciable existing pipe complete all as specified and directed. |
| 115 | M&L for drilling and tapping cast iron water mains (in position) for branch connection of 25mm bore CI/GI pipe including and provn of suitable size MS clamp with nuts, bolts and washers and welded with one GI socket complete all as specified and directed. |
| 116 | Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe of size 25mm bore complete all as specified and directed. |
| 117 | Supply and fixing exhaust fan, steel body AC single phase. 230V of size 300mm sweep with, blades, and frame and louvers and complete all as specified and directed. |