|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for steel members of fence,gate etc complete all as specified and directed. |
| 2 | Demolition Concrete of any description and in any position not otherwise specifically provided for drain,kerb stone,parapetetc concrete etc complete all as specified and directed. |
| 3 | Dismantling fencing wire mesh, any typecomplete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced )(below or above ground level) and removing debris off the site complete all as spcified and as directed. |
| 5 | Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar complete all as specified and directed. |
| 6 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 7 | Excavating in trenches, n.exc 1.5m wide and n exc 1.5 in depth; for foundation etc.getting out hard/dense soil all as specified and directed . |
| 8 | Material and labour for providing plain cement concrete1:3:6 type C2, using( 40mm graded stone aggregate )as in foundation filling and massconcrete for manhole&Septic tankall as specified and as directed. |
| 9 | M& L for 75mm thick PCC type C-2(1:3:6)using 40mm graded stone aggregate as in sub base,pavings,plinth protections etc for top finish of any descriptionetc including finish the surface even and fair (without using extra cement)orrough to receive the top finish complete all as specified and diercted. |
| 10 | M&L for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar in CM(1:6) as in retaining wall,toe wall etccomplete all as specified and directed. |
| 11 | All as item No .10 above but using old stone obtained from demolition vide item No 5 above |
| 12 | M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid blocks exc 10cm width and setting in mortar(1:6) complete all as specified and directed. |
| 13 | M&L for RCC Type B1-1:2:4 (using 20mm graded aggregate )asin Columns, pillars, piers, posts and strutsetccomplete all as specified and directed. |
| 14 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete as in hard or dence soilcomplete all as specified and directed. |
| 15 | S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed |
| 16 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed and to be fitted with washer and the hexogonel or square nut dia 5 to 10 mm not exc 5cm long complete all as specified and as directed |
| 17 | S&F MS round bar 10 mm dia fixed indepently including hooking ends for chain link fencing conforming to Fe 290 Gde E-165 complete all as specified and as directed |
| 18 | S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and as directed. |
| 19 | S&F TMT Mild steel bars 5mm dia and overbut 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete as specified and as directed. |
| 20 | M&L for form work to sides (Flat)of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 21 | M & L for Formwork to sides (flat) to sides of pillars, posts, struts, piers, columns and stanchions etc.complete all as specified and directed. |
| 22 | M&L 10mm thick rendering plaster onfair face of brick-work or concrete surface incl finish the surface even and smooth without using extra cement in CM 1:4 complete all as specified and as directed . |
| 23 | Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slabin single piece or two piece length, table rubbed and polished, laid over and including 15mm thick rendering in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in vertical surface of column,steps etcetc, including cutting, polishing and rounding to edges of stone slabsetc., complete all as specified and as directed. |
| 24 | S&F mild steel for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, prong ,water tank frame work,monkey gauge etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door fittings, inclusive of steel sheeting or other covering, running rails and guides, CI ornaments fitting; also fastening and fixing complete and similar work confirming to Fe-290 Gde E- 165 complete all as specified and as directed |
| 25 | M&L for 2 coats of synthetic enamel painting over a coat of red oxide zinc crome on new steel surface of any description over 10 cm width or girth not otherwise describedincl preperation of surfaces complete all as specified and as directed |
| 26 | M&L for 2 coats of synthetic enamel painting over a coat of red oxide zinc crome on new steel surface of any description n exc10 cm width or girth not otherwise describedincl preperation of surfaces complete all as specified and as directed |
| 27 | Supply only chain link MS galvanised fencing any size or type and any thick complete all as specified and as directed |
| 28 | Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed |
| 29 | M&L for chequered cement concrete tiles of size 20cmx20cmx 25mm thick ,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour over 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 30 | Supply and fixing and as in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.(each line wire to be measured) complete all as specified and directed. |
| 31 | M&L raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed. |
| 32 | M&L raisedpointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto courses including raking out joints to the joints to existingrandom rubble or polygonal rubble uncoursed or brought up to coursescomplete all as specified and as directed. |
| 33 | M&L 15mm thick rendering onfair face of brick-work or concrete surface incl finish the surface even and smooth without using extra cement in CM 1:6 complete all as specified and as directed . |
| 34 | Material and labour for providing plain cement concrete1:3:6 type C2, using( 40mm graded stone aggregate )as in drain / surface channel including necessary form work completeall as specified and as directed. |
| 35 | Material and labour for complete removal of existing surface of wall of any description andappying two coat cement base paint over one coat chalk white primer on newly plastered surface including preperation of the surface all as specified and directed. |
| 36 | Material and labour for appying two coat cement base paint over one coat chalk white primer on newly plastered surface including preperation of the surface all as specified and directed. |
| 37 | S&F PVC (SWR) pipes single socketed, in any length as in weep hole etc fixed to walls (110mm bore) complete all as specified and as directed |
| 38 | Returning filling including spreading leveling watering and well ramming in layers not exc 25 cm hard and dense soilall as specified and directed. |
| 39 | Removing excavated material not exc 50M and depositing where directed (Soils) at a level not exc.1.5 mtr above the starting pointall as specified and directed. |
| 40 | M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggragate as in steps,cills; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbsand the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 41 | Surface excavation n exc 30 cm deep and avg 15 cm deep and getting out in hard /dense soil etc complete all as specified and directed. |
| 42 | M&L for hard core, broken to gauge n exc 63 mm with broken stone /boulders complete all as specified and directed. |
| 43 | M&L for laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade withapproved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specifed and directetd. |
| 44 | M&L for Rolled sections as in main and cross beams, hip and jack rafters;purlins,coloumn etcwhere connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250) quality B complete all as specified and directed. |
| 45 | S&F prepainted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strenth of 550MPA as in roof covering /cladding to wall,crimp curved where necessary fixed with self tapping screws complete all as specified and directed. |
| 46 | S&F Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roofovering/cladding to wall, fixed with self tapping screws acomplete all as specified and directed. |
| 47 | S&F PVC(SWR) 150mm dia half round Rain water gutter incl all joints etc complete all as specified and directed. |
| 48 | S&F110 mm bore PVC (SWR) pipessingle socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed. |
| 49 | S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed. |
| 50 | S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed. |
| 51 | M&L for providing precast cement concrete solid building blocks or slabs Type C1 1:3:6 (20 mm gradedaggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar, (1:4) complete, in walls ,partion,platform support etc complete all as specified and directed. |
| 52 | M&L for framed work such as grills, gratings,etc.with angle,joist,tee/tubular sections and with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 including hinges,hold fast,etc complete all as specified and directed. |
| 53 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 54 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete.dust, etc washing down with water to remove dust, etc complete all as specified and directed. |
| 55 | M&L for cement concrete 25mm thicktype B-0 1:2:4 using 12.5mm graded stone aggregateas in flooring with using liquid water proofing of approved make;Make : Fosroc/Dr.Fixi/Asian Paintt or equivalent. (WPC shall be measured and paid separatily) complete all as specified and directed. |
| 56 | M&L for non skid ceramic tiles 7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 57 | M&L for coloured glazed ceramic tiles of size300x600x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and directed. |
| 58 | M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete as specified and as directed. |
| 59 | M&L for use & waste of steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. to flat rough finished surfaces of concrete square or rectangle complete as specified and as directed. |
| 60 | S&F TMT bars Mild steel bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 61 | Supply andfix 50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/sqcmin any length with rubber ring joint complete all as specified and as directed. |
| 62 | Supply and fix stainless steelplate racks made of stanless steel 0.80mm thick sheet standard size 24\"x36x10\"and design as approved by GE,complete all as specified and as directed. Make: Nirali/Parryware as approved by GE. |
| 63 | S&F bib cock long body with wall flange Make:Cat NoG1405A1of Parryware/ F730011 of Hindware / CON 107 KN of Jaquar orequivalent all as specified and directed. |
| 64 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 65 | Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slabin single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter topin steps, jambs, pillars, window-cills,etc, including cutting, polishing and rounding to edges of stone slabsetc., complete all as specified and as directed. |
