|
| 1 | M&L for preparing old bituminous surfaces of road and marking 2.0mm thick centre lines, stop lines, dashes, arrows etc and the like n exc 10cm wide on roads pavements except zebra crossing with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 2 | M&L for preparion of old painted surface and applying a coat of synthatic enamel paint on old concrete surface including surface preparationof any description (Road side cement concrete kerb stone in ZABRA Pattern) complete all as specified and directed. |
| 3 | M&L preparation of new surface and applyingtwocoat of synthatic enamel paint on new concrete surface over a coat of primer (Road side cement concrete kerb stone in ZABRA Pattern) complete all as specified and directed. |
| 4 | M&L in repair for identification sign/cautionary mandatory and information sign board area exc 0.60 Sqm and n exc 1.20 Sqm with thickness not less than 3.0mm aluminium composite panel covered by encapsulated lens type retro reflective sheet (grade 3M type II diamond grade of make 3M/dark eye/SNI ) on both side with green base, including writing of necessary letter/symbols of reflective type fixed on and including stainless steel frame of size 25mmx25mm and hang on 50mm dia stainless steel pipe(fabrication work from SS-304 material) of height 2.4 mtr from ground level to top and post embeded in ground with PCC 1:3:6 TYPE C-2 using 40mm graded aggregate of size 45x45x45cm including necessary excavation and earth work and making plateform of size 150x45x30cm with PCC 1:2:4 using 20mm graded aggregate including necessary formwork and covering all exposed surfacess with black colour glazed ceramic tile (joint less) of size (600x300x7mm) / (450x300x7mm thick over and including 10mm thick backing coat in cement mortar(1:4) set and jointed in neat cement slurry and pointed to match the tiles complete.Note:- The specifaction of board is held with GE(A) Barmer as sketch. The letters and symbols etc on both side shall be as per site requirement of user and as approved by GE. The size and font of wording/ arrow/ symbols as per direction of Engineer In-Charge. |
| 5 | S&F cat eye solar two side reflective type of metal aluminiumstud body alloy of size 110mm x 120mm x 20mm with PMMA strip lens reflector of suitable size as per manufactures instructions fixed with epoxy complete all as specified and directed.Make:- Dark eye/ Road Star/ 3M/ SNI/ ace polymers, fire equipment engineers, dish steel fab or equivalent makes as per Appx \"C\" and as approved by GE. |
| 6 | S&F solar cat eye aluminum alloy shall (100% water proofing design according to IP 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-cd rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instruction fixed with epoxy etc complete all as specified and directed.Make:- Dark eye/ Road Star/ 3M/ SNI/ ace polymers, fire equipment engineers, dish steel fab or equivalent makes as per Appx \"C\" and as approved by GE. |
| 7 | S&F metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.Make:- Dark eye/ Road Star/ 3M/ SNI/ ace polymers, fire equipment engineers, dish steel fab or equivalent makes as per Appx \"C\" and as approved by GE. |
| 8 | Dismantaling Stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 9 | M&L for 80 mm thickness machine pressed precast rubber moulded interlocking paver block anyshape and size conforming to IS - 15658-2006 ofM-40 grade with grey cement with pigment complete all as specified and directed. Make : M/s Mehtab Tiles/ M/s Navya Tiles/ M/s Ultra Tiles |
| 10 | M&L for 60 mm thickness machine pressed precast rubber moulded interlocking paver block anyshape and size conforming to IS - 15658-2006 ofM-40 grade with grey cement with pigment complete all as specified and directed. Make : M/s Mehtab Tiles/ M/s Navya Tiles/ M/s Ultra Tiles |
| 11 | M&L for 300mmx300mmx10mm thick non skid polka dots endura parking floor paver tiles with grey cementandpigment, over and including 15mm thick screed in CM (1:4), set jointed & pointed in neat cement slurry in floors complete all as specified and directed. |
| 12 | M&L for Chequered cement concrete tiles with grey cement and pigments 20cm x20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:4, complete all as specified and directed |
| 13 | M&L for sand filling25mm thick under floors or in foundations inc. watering and consolidation complete all as specified and directed. |
| 14 | Demolition of concrete in ground floors and pavingnexc 15cm thickness (below or above ground level) complete all as specified and directed |
| 15 | M&L for cement concrete 1:2:4 (20mm graded stone aggregate) as in Coping, Roof covering laid in slope, Holdfast including necessary formwork and weathering, slightly rounded or chamfered angles and throating,pcc for kerb stone base finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curveshall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. |
| 17 | M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
