|
| 1 | M&L for onecoat of synthatic enamel paint on old concrete surface including surface preparationof any description (Road side cement concrete kerb stone in ZABRA Pattern) complete all as specified and directed. |
| 2 | M&L for twocoat of synthatic enamel paint on new concrete surface including surface preparationof any description (Road side cement concrete kerb stone in ZABRA Pattern) complete all as specified and directed. |
| 3 | M&L in repair for identification sign/cautionary mandatory and information sign board area exc 0.60 Sqm and n exc 1.20 Sqm with thickness not less than 3.0mm aluminium composite panel covered by encapsulated lens type retro reflective sheet (grade 3M type II diamond grade of make 3M/dark eye/SNI ) on both side with green base, including writing of necessary letter/symbols of reflective type fixed on and including stainless steel frame of size 25mmx25mm and hang on 50mm dia stainless steel pipe(fabrication work from SS-304 material) of height 2.4 mtr from ground level to top and post embeded in ground with PCC 1:3:6 TYPE C-2 using 40mm graded aggregate of size 45x45x45cm including necessary excavation and earth work and making plateform of size 150x45x30cm with PCC 1:2:4 using 20mm graded aggregate including necessary formwork and covering all exposed surfacess with black colour glazed ceramic tile (joint less) of size (600x300x7mm) / (450x300x7mm thick over and including 10mm thick backing coat in cement mortar(1:4) set and jointed in neat cement slurry and pointed to match the tiles complete.Note:- The specifaction of board is held with GE(A) Barmer as sketch. The letters and symbols etc on both side shall be as per site requirement of user and as approved by GE. The size and font of wording/ arrow/ symbols as per direction of Engineer In-Charge. |
| 4 | Supply & Fixed in repair aluminium composite panel not less than 3.0 mm thick and including covered both side by encapsulated lens type retro reflective sheet (grade 3 M type II diamond grade of make 3M/dark eye/ SNI) of any base,with and including all type and any size of writting letters and symbols of reflective type including all as directed by Engr-In-charge. |
| 5 | S&F cat eyetwo side reflective type of metal aluminium stud body alloy of size 110mm x 120mm x 20mm with PMMA strip lens reflector of suitable size as per manufactures instructions fixed with epoxy complete all as specified and directed.Make:- Dark eye/ Road Star/ 3M/ SNI/ ace polymers, fire equipment engineers, dish steel fab or equivalent makes as per Appx \"C\" and as approved by GE. |
| 6 | S&F solar cat eye aluminum alloy shall (100% water proofing design according to IP 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-cd rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instruction fixed with epoxy etc complete all as specified and directed.Make:- Dark eye/ Road Star/ 3M/ SNI/ ace polymers, fire equipment engineers, dish steel fab or equivalent makes as per Appx \"C\" and as approved by GE. |
| 7 | S&F metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.Make:- Dark eye/ Road Star/ 3M/ SNI/ ace polymers, fire equipment engineers, dish steel fab or equivalent makes as per Appx \"C\" and as approved by GE. |
| 8 | S&F in repair smart solar tubular dealineator of 1mtr height, modal No DA-112 dark eye or equivalent in road star/SNI/ACE/POLYMERS/Fire equipment engineers/dish steel fab as per Appx \"C\" or as approved by GE, of material polycarbonate ABS and battery 1.2 V including embedding in PCC 1:2:4 (150x150x300mm) type B-1 complete all as specified and directed. |
| 9 | S&F in repair Outdoor Polycarbonate Convex Mirror size of 100 CM outer diawith 130 Degree + actual viewing angle, equipped with adjusting swivel and mounting bracket for infinite adjustment including embedding in PCC 1:2:4 size (450x450x600mm) type B1 including demolition of old PCC, mounted over 75mm dia stainless steel pole of appropriate height and adjustable arrangment complete all as specified and directed. Make : Road Star/Star Safety/Dark eye or equivalent as approved by GE. |
| 10 | M&L for preparing new or old bituminous surfaces of road and marking 2.0mm thick centre lines, stop lines, dashes, arrows etc and the like n exc 10cm wide on roads pavements except zebra crossing with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 11 | Dismantaling Stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 12 | Demolition of concrete in ground floors and pavingnexc 15cm thickness (below or above ground level) complete all as specified and directed |
| 13 | M&L for cement concrete 1:2:4 (20mm graded stone aggregate) as in Coping, Roof covering laid in slope, Holdfast including necessary formwork and weathering, slightly rounded or chamfered angles and throating,pcc for kerb stone base finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curveshall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. |
| 15 | M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approvedcolour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over and including 50mmthick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting ofpaver block as per required size and pattern, finishing and sweeping extra sand; complete. Make : M/s Mehtab Tiles/ M/s Navya Tiles/ M/s Ultra Tiles |
| 17 | S& F for stainless steel letters (any from A to Z ) 300 to600 mm height, 50-125 mm width and 25 to 40 mm depth made of 0.79 mm thick (22 Gauge) stainless steel 304 grade with seemless welding rubbed polished (Golden/silver/Rose gold ) and edges made smooth with necessary fixing devices like SS screws or as per manufacturs instruction to fixed on ACP sheet, wall or stone complete all as specified and directed by Engr-in-charge. |
| 18 | Dismantiling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified. |
| 19 | M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,frame work for notice board and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed. |
| 20 | M&L Preparing new steel surfaces of any description, over 10cm in width/girth, applying two coats of synthethic enamel paint over one coat of red oxide primer. |
| 21 | M&L for PCC 1:4:8 type D-2 (using 40mm gde agg) as in foundation and mass concrete complete as specified and directed by Engr-in-Charge. |
| 22 | Material & Labour for repair and fixing stainless steel (Grade 304) railing with chain, madeofhollowtubes, channels, platesetc., includingwelding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
