|
| 1 | Excavating over areasin hard/dense soil not exceeding 1.5 M deep andgetting out. , as directed . |
| 2 | Excavating over areasin hard/dense soil exceeding 1.5 M deep and n.exc. 3.00 Mdepth & getting out., as directed . |
| 3 | Boring holes 3m deep 300 mm dia. in soil for under-reamed piles and getting out and disposal of spoil to a distance of n exc. 50 m all as directed |
| 4 | M & L for hardcore of broken stone or boulder of gauge n.exc. 63mm, spread and levelled in layers not exceeding 15 CM thick watered and rammed to a true surface |
| 5 | Providing & Layingof cement concreteD2-type, 1:4:8 mix. (40mm graded aggregate) in foundations, filling, Floors etc. |
| 6 | Providing & Layingof cement concrete type B-1 1:2:4 (20 mm aggreagte) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, all as directed. |
| 7 | Providing & laying of R.C.C. B1-type 1:2:4 Mix using 20mm graded agg. In columns, pillars, piers, posts and struts etc. |
| 8 | Providing RCC Type B-1 , 1:2:4 20 mm aggrigate forslabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as directed. |
| 9 | Supply & fixing mild steel deformed or twisted bars 10MMDia and over of Fe-410 , W (gde-E 250) quality A or Fe-290 (Gde-E 165) cut to length bent to shape required including cranking, bending spirally for hooping for columns,beams(plinth & roof) etc,hooking ends and binding with mild steel wire (annealed) not less than 0.9 MM Dia.all as per specification and as directed . |
| 10 | Supply & Fixingof mild steel deformed or twisted bars 6 MM to 8mm Dia. Fe-410 , W (gde-E 250) quality A or Fe-290 (Gde-E 165) cut to length bent to shape requiredincluding cranking, bending, hooking ends,placing in position andsupply & bindingwithmildsteel wire (annealed) not less than 0.9 MM all as directed. |
| 11 | Providing form work to sides & soffits for rough finished flat surfaces of concrete i.e. foundations, footings, plinth beams etc. |
| 12 | Providing formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick all asdirected. |
| 13 | supply and providing of Brick work with sub- class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in 1:4 cement mortor as directed. |
| 14 | Supply and providing ofBrickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in built in 1:4 cement mortor as directed. |
| 15 | Supply & Plastering, Rendering 12 MM thick cement plaster on wall, ceiling, roof projection, facia etc. with cement mortar 1:4 on fair faces of brick work or concrete surfacesas directed. |
| 16 | Preparation of new decoratedplastered surfacesand Supply & Apply one coat primer and two coatdistemper oil emulsionpaint on wall /Ceiling, cornices etc. MAKE- Asian paints,Burger, Narolac or its equivalent. |
| 17 | Supply and providing 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as directed. |
| 18 | S&F and erection in Framed work Fe- 290(Gde E-165)as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete |
| 19 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc |
| 20 | Supply and laying of screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying tiles all as directed. |
| 21 | Supply & fixing of non skid ceramic tiles of light shade 7 to 8 mm thick area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in floor set & jointed in neat cement slurry and pointed in white cement all as directed |
| 22 | Virified Ceramic tiles 10 mm thick (square/ rectangular)of light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed Make Johnson, kajaria,orient bell or its equivalent . |
| 23 | Supply & fixing/providing of Vitreous China bowl urinals flat back, size of 465x355x265mm (Make : CERA, Hindware, Johnson Pedder, Parryware). complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securingurinals to plugs with andincluding 60mm long brass screws pointing around urinal back in cement;supply & fixing of PVC automatic flushing cistern 5 ltr. cap.with brackets, PVC flush pipe, grating & union, dischargepipe. all as per specification and as directed |
| 24 | Supply & fixing of Indian type Water closet vitreous china squatting pan \"Orissa\" pattern size 580 x 440 mm white with integral foot rests including trap set in and including concrete complete (Make- CERA, Hindware, Johnson Pedder, Parryware)and supplying and fixing 10 litres PVC, volveless, syphonic action type, low level flushing cistern of Make :-URA / HINDWARE / JOHNSON PEDDAR / PARRYWARE with inlet, ballvalve,float, brackets with PVC flush pipe 32mm Dia, for low level cisternand provide & fixed 100mm Dia. cast iron sanitary connections- short connections pipe with socket length upto 300 mm to fit WC out-let (IWC) fixed in repair all as per specification and as directed. |
| 25 | Supply & fixing of Vitreous China wash basin, white, flat back, size 550x400mm.(Make- CERA, Hindware, Johnson Pedder, Parryware)includingwaste copouling,flush pipe etc. with fixing including cutting for and pinning inends ofbracketsor erecting stand and all as directed. |
| 26 | S&F rotational moulded polyethylene water storage tanks of capacity 1000 lit. (cylindrical vertical with closed top) hoisted and fixed in position all as specified Make- Supreme,Plasto, Ashriwad or its equivalent. |
| 27 | Supplying and laying of CPVC pipes 20 mmSDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. Make- Astral, Supreme, Ashirwad, finolex or its equivalent. |
| 28 | Supplying and laying of CPVC pipes 16/15 mmSDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. Make- Astral, Supreme, Ashirwad, finolex or its equivalent. |
| 29 | S & F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors . |
| 30 | S & F of PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 31 | S & F of PVC (SWR) bend 110 mm dia any radius as directed. |
| 32 | S & F of PVC (SWR) T 110 mm dia any radius as direceted. |
| 33 | PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement |
| 34 | S&F Pillar taps 15mm of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) Make-Prayag, jaquar, johnson, 10X, Khodal plast or its equivalent. |
| 35 | Stop valve 15mm of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) Make-Prayag, jaquar, johnson, 10X, Khodal plast or its equivalent. |
| 36 | S&F Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).Make-Prayag, jaquar, johnson, 10X, Khodal plast or its equivalent. |
| 37 | S&F PVC connections 15mm size with PTMT nuts of length 600mm etc. as directed. |
| 38 | Low density polyethylene pipes 40 mm dia(LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. |
| 39 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as directed. |
| 40 | Supply & fixing Brass Elbow 16 mm dia to CPVC pipiline all as directed. |
| 41 | S&F Male Brass Threaded Adaptor 16 mm dia(MTA/ MBTA) ) all as directed |
| 42 | S&F Female Brass Threaded Adaptor16mm dia (FTA/ FBTA all as directed |
| 43 | Removing of excavated soil leadnot exceeding50M and depositing where directed. |
| 44 | Supply and fixing of 20 mm diastop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle,ISI mark with minimum weight 400 gram,screwed both end foriron pipe or unions with PVC connector all as per specification andas diercted.Make Prayag,hindware,RN valves or its equivalent. |
| 45 | Supply & fixing ofPVC(SWR) ventcowls 110mm bore of pipe including jointing to waste pipe.all as per specification and as directed. |
| 46 | Supply & fixing of 600 x 450 mm beveled edge mirror ofselected quality glass mounted on 6 mm thick plywood andfixed to wooden plugs with chromium plated brass screw &cup washers as per specification and as directed. |
| 47 | Supply and fixing Glazed ceramic colouredtiles(PREMIUM QUALITY) 350MM x 250MM x 6mm OR 450 x 350mm x 6mm thick,( Make->JOHNSON/KAJARIA/Somany/NITCO ) on verticle surfaces such as skirting, dados and risers to steps, wall of water tank etc. set and jointed in neat cement slurry and pointed in coloured cement to match all as per manufaturers specification and as directed |
| 48 | Preparing of new plastered surface on wall,cornices ,soffits, chajjas, facias etc. includingrepairs/refilling of plug holes,cracks, touching withprimer,wetting the surface with water and apply FIRSTCOAT OF CEMENT BASED PAINT including curing with water for two days and then apply final coat cement paint white or tintedand curing for two days all as directed(Total Two coats) Make- Snowcem, Apex cement paint,Birla cement paint or its eqiuvalent. |
| 49 | Returning, filling in,hard/dense soil including spreading, leveling, watering and well ramming in layers not exceeding 25 CMas directed. |
| 50 | Supply and Fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. square tube for top and bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site, including required Al. handles, Al. Aldrop bolt,Al. Tower bolt,MS/GI butt hingesas per specification, drawing & as directed. |
| 51 | S&F Plain, framed, panelled shutters shutter frame made of 40 mm thick Indian teak wood (1st class hard wood )consisting of vertical styles, top rail size 100 x 40 mm, lock & bottom rail size 200 x 40 mm, 12mm thick BWR grade plywood any number of panelswith one priming coat of pink primer & two coats synthetic enamel paint,all as per specification and as directed. |
| 52 | Mild steel pressed handles 150 mm, oval type, stove enamelled black. |
| 53 | Mild steel pressed handles 100 mm, oval type, stove enamelled black. |
| 54 | Supply & Fixing of 125 MM long medium weight M.S. Butt hinges as directed. |
| 55 | S&F Mild steel sliding door bolts 300 mm ,plate type, stove enamelled black, with bright bolt not less than 12mm dia with andincluding a minimum of 6 bolt sand nuts, four on bolt plate andtwo on staple plate and fixed all as directed. |
| 56 | Supply and Fixing of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Make JSW,National steel , tata shaktee or its equivalent. |
| 57 | Supply, Fabrication and Erection/Fixing in wallsMS Rolled sections Fe-290 Gde E-165as in main and cross beams, hip and jack rafters; purlins where connected to common raftersfixed with angle cleats or other connecting plates and drilling in walls all as directed. |
| 58 | Mild steel barrel tower bolts 200mm , stove enamelled black, with bright bolt and fixed |
| 59 | Mild steel barrel tower bolts 125mm , stove enamelled black, with bright bolt and fixed |
| 60 | Supply and filling for broken brickfor loose filling, of gauge80 mm to 150 mm graded all as directed. |
| 61 | M&L for preperation new steel surface Surfaces of any description, over 10cm in width or girth, not otherwise and apply one coat red oxide zinc chrome and two coat synthetic enamel paintall as directed.described |
| 62 | Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m |
| 63 | Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 64 | M&L for one light point or one fan point controlled by one switch with cables 1.5 sq. mm size |
| 65 | M&L for Switch piano, flush type single pole, one way 5 Amp |
| 66 | M&L for Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body |
| 67 | M&L for Boxes junctions, plastic, round, four terminals |
| 68 | M&L for Supply and laying or fixing or passing through pipe, 1100 volts grade heavy dutycable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC 4 coresheathed 6 sq. mm nominal cross section in service connections all as directed. |
| 69 | Switch socket combination16A, flush type 5A/16A, 5 pinall as directed. |
| 70 | S&F for Sheet metal enclosure for MCB DB Single pole & neutral 4 way with 200 amps rated bus bar 240 V |
| 71 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
