|
| 1 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm |
| 2 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 1 run cable |
| 3 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), double door |
| 4 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder,ailings, brackets, gates and similar works |
| 5 | Supplying and fixing 100 amps rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 6 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 7 | Providing and fixing of metal body 15 amps extension board with 3 Nos. 15 amps socket and 1 Nos. switch including making connection etc. as required at site. |
| 8 | Installation and removing of existing feeder pillar for temporary bases i/c connections, collecting and submitting the same in custody of Engineer-in Charge as required at site. |
| 9 | Installation of existing TPDB for temporary bases i/c connections, collectingand submitting the same in custody of Engineer -in Charge etc. as required at site. |
| 10 | Installation of existing Extension Board feeder pillar for temporary bases i/c connection, submitting the same in custody of Engineer-in Charge etc. as required at site. |
| 11 | Supplying, fixing of one number PVC insulated and PVC sheathed /XLPE armoured copper conductor power cable comfirming to 1.1 KV grade of following size direct in wall etc. as required. 4x16 sq.mm |
| 12 | Supplying and fixing of following 63 amps four pole RCBO\"s (Three phases and neutral) 415 volts residual current circuit breaker witih overcurrent protection having a sensitivity upto 300 amps miliampers in the existing MCB DB complete witih connections, testing and commissioning etc. as required (Legrand CAT No. 411379) |
| 13 | S/F 3x1.5 sq.mm PVC insulated and PVC sheathed copper conductor flexible cable i/c connection etc. as required |
| 14 | S/F 3x2.5 sq.mm PVC insulated and PVC sheathed copper conductor flexible cable i/c connection etc. as required |
