|
| 1 | Supplying ofLED Flood Light fixture of 500 watt glare free and lumen output not less than70000 Lumens(having minimum fixture efficacy of 140 Lm/Watt ) fitting with suitable clamp. The luminaire should be confirming to IP 66 & IK 08 (for impact resistance), ExternalSurge protection of 10KV and Internal Surge protection of 4 KV (integrated to the driver unit) CCT = 5700 ± 350° K, CRI ≥70, TLCI≥90, Life L70≥ 50K hrs. Fitting may be integrated type (with driver unit) or non integrated type (with separate driver unit). The LM 79, LM 80 & TTC Certificates shall have to be submitted form NABL/ UL/ third party lab to verify the above parameters) The complete item shall be as per specification and additional conditions attached, complete etc. as required. |
| 2 | Supplying of multi core round shethed unarmoured copper conductor cable, XLPE insulated, PVC sheeted and conforming to IS 7098 (Part-I) complete as required. |
| 3 | 4 x 4 sqmm |
| 4 | Supplying and drawing of 3 x 2.5 sqmm FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 5 | Supplying of following sizes of aluminum conductor XLPE insulated PVC inner sheathed armoured cable 1.1 KV grade confirming to IS:7098 (Part-I) complete with all amendments etc as required:- |
| 6 | a) 2 x 16 Sq.mm |
| 7 | b) 4 x 25 Sq.mm |
| 8 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 9 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 10 | Laying of one number PVC insulated and PVC nsheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 11 | Upto 35 sq. mm |
| 12 | Supplying,Installation,Testing&Commissioningof150 watt FloodLight, powdercoatedpressuredie cast aluminiumbody withbuilt in or separate driver as per the requirement with Driver efficiency >85%, Input voltage:Input voltage:140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95,IP-66,IK-10,CRI >70,undervoltageandovervoltageprotection, EMI-EMCasper CISPR -15,lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumenmaintained tilllife ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K/ 5700°K/6500°K(AsperANSIBin),SDCM(Standard Deviation Color Matching) <5,Maximumpowerconsumptionshouldnotmore than the specified rating and Fixture shall be ofrelevant BIS standardcompleteinallrespecti/c external connectionswith1.5sqmmFRLS/HFFR,PVCinsulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report andalltestingrequiredforLED fixtures as per BISshall be submitted.. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermalmanagement:heatsinkofaluminiumhousing such that LED junction temperature shall not rise above 90°C). |
| 13 | SupplyingofLED Flood Light fixture of 400 watt and lumen output not less than56000 Lumens(having minimum fixture efficacy of 140 Lm/Watt ) fitting with suitable clamp. The luminaire should be confirming to IP 66 & IK 08 (for impact resistance), ExternalSurge protection of 10 KV and Internal Surge protection of 4 KV (integrated to the driver unit) CCT = 5700 ± 350° K, CRI ≥70, TLCI≥90, Life L70≥ 50K hrs. Fitting may be integrated type (with driver unit) or non integrated type (with separate driver unit). The LM 79, LM 80 & TTC Certificates shall have to be submitted form NABL/ UL/ third party lab to verify the above parameters) The complete item shall be as per specification and additional conditions attached, complete etc. as required. |
| 14 | Supplying Installation, testing & commissioningof 45 Watt LED Post Top Luminaire made of aluminium bottom housing and spun alluminium top reflector with decorative PMMA opaland clear diffuser with IP 65 protection. Housing duly Powder coated/PU painted. High lumen Led’s are mounted are directly mounted on aluminium heat sinks. etc complete as required |
| 15 | Installation, testing & commissioning of400 watt & 500 flood light along with all the required accessories/ mounting device etc. if required at required location. |
