|
| 1 | Provision for Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (Rate Including GST as per Rule). |
| 2 | Excavation work in ordinary rock by manual means in foundation, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. (Rate Including GST as per Rule). |
| 3 | Providing and laying in position cement concrete of specified grade 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 20 mm nominal size). (Rate Including GST as per Rule). |
| 4 | Random rubble masonry with hard stone in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand) including T & P, Material, Scaffolding etc complete. (Rate Including GST as per Rule). |
| 5 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). (Rate Including GST as per Rule). |
| 6 | Providing Coursed rubble with hard stone with :Cement mortar 1:6 (1 cement : 6 coarse sand) inluding supply of all materials labour T&P etc. required for proper completion of work. (Rate Including GST as per Rule). |
| 7 | Providing & fixing M.S. grill of required pattern with angle iron frames (40x40x6)mm size and graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (Drawing Enclosed). (Rate Including GST as per Rule). |
| 8 | Providing & fixing M.S. gates of required pattern with angle iron frames (50x50x6)mm size and cross post m.s. flat 50x6 mm graded with 10 cm c/c Sq. bars 16mm size pointed at the top extra with same curved bar and each frame having Gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with supply of R.S. Joist (200x100x5.7)mm section for hanging M.S. gate including nut bolts, cutting fabricating welding etc. complete. (Drawing Enclosed). (Rate Including GST as per Rule). |
| 9 | Providing and laying 15mm av thick simple moulded plaster 1:1:1 ratio composite lime mortar (1Lime :1C.Sand :1Surkhi) mixed with composite materials labour T&P etc. required for proper completion work. (Rate Including GST as per Rule). |
| 10 | Recessed Pointing on walls 1:1:1 ratio lime mortar (1Lime :1 C. sand: 1 Surkhi) mixed with colour pigment, belgiri, gum & gur including racking out joints etc. and supply of all materials labour, scaffolding, T&P etc required for proper completion of work. (Rate Including GST as per Rule). |
| 11 | Removal of old damaged stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 metres. (Rate Including GST as per Rule). |
| 12 | Providing & laying position lime concrete with graded brick aggregate 20-25 mm gage size and 50% composite lime mortar 1:1:1 ratio (1 lime, 1 Surkhi 1 C.Sand,) mixing with adhesive materials as belgiri, gum & gur as in floor and roof including supply of all materials labour T. & P. etc required for proper completion of work. (Rate Including GST as per Rule). |
| 13 | Coursed Rubble masonry pitching at flooring as pathway with 10% available stone and 90% new stone matching with the original with Cement mortar 1:6 (1 cement : 6 coarse sand). (Rate Including GST as per Rule). |
| 14 | Supply and fixing M.S. Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia etc. complete. (Rate Including GST as per Rule). |
| 15 | Barbed wire fencing and angle iron post placed at required distance, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 10 horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc, complete. (Rate Including GST as per Rule). |
| 16 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 mtr openable length (total length 90 m), having 50 nos rounds per 6 mtr length, with existing angle iron \"Y\" shaped placed 2.4 m or 3.00 m apart and with 10 horizontal RBT reinforced barbed wire, stud tied with GI staples and GI clips to retain horizontal, including necessary bolts or GI, barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ mtr. (Rate Including GST as per Rule). |
| 17 | Providing & fixing M.S. grill of required pattern for Grass Lawn with angle iron frames (40x40x6)mm size and graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (Rate Including GST as per Rule). |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture of required colour :Two or more coats on new work. (Rate Including GST as per Rule). |
| 19 | Disposal of malba/ waste by mechanical transport including loading, transporting, unloading to outside of municipal limits for lead upto 10 km for all lifts, complete as per direction of site inchrage. (Rate Including GST as per Rule). |
