|
| 1 | Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. |
| 2 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches. leveling, dressing and ramming the bottom. bailing out water as required complete. Depth of excavation not exceeding 1,500 mm. |
| 3 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable concrete plain or reinforced, stacking serviceable within a lead of 75 m. a) In ground floor including roof (PWD schedule Page 10 item-1(a ) |
| 4 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. b) up to 150 mm. thick. (PWD schedule Page 10 item-2(a ) |
| 5 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steelbars. a) In ground floor including roof. (PWD schedule Page 10 item-3(a) |
| 6 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurment of finished quantity of work). With earth obtained from excavation of foundation. |
| 7 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity). (PWD schedule Page 2 item-4 (a) |
| 8 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity).Do - by fine sand (PWD schedule Page 2 item-4 (b) |
| 9 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.(PWD schedule Page 1 item-3(a) 3rd CORRIGENDA. |
| 10 | Cement concrete with graded stone ballast (40 mm. size excluding shuttering).In ground floor. Pakur variety.1:3:6 proportion.(PWD schedule Page 34 item-22 &3rd CORRIGENDA) |
| 11 | Ordinary cement concrete (Mix 1:1.5:3) with graded stone chips (20 mm. niminal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur variety. In Ground floor. |
| 12 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (analysed rate)a) Pakur Variety (PWD schedule Page 24 item-4A ) |
| 13 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and column, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm. to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-charge. |
| 14 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and column, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).25mm to 30 mm shuttering without staging in foundatin etc. |
| 15 | Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (i) Tor steel/Mild Steel 1. JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL Ground floor and Foundation (PWD schedule Page 43 item-40.ii and 10th CORRIGENDA) |
| 16 | Supplying, fitting, fixing in position netting with PVC CoatedCrinkle mesh of approved colour with wooden or steel or concrete frame work including cost of galvanised bolts, nuts, screws, nails, spacers, shape welding etc complete but excluding the cost of supporting frame works, battens etc.50 mm. x 50 mm. x 8 g |
| 17 | M.S. works in brackets made from flats, angles, tees etc. to sizesspecialy bent, twisted, forged; making holes drilled and fitted torafter of trusses with necessary bolts, nuts, washer or screws etc.(length of straight not less than 230 mm) (PWD schedule Page 103 item-8 & 3rd CORRIGENDA ) |
| 18 | Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire where necessary. PWD schedule Page 219 item-2 |
| 19 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within alead of 75m as directed. (PWD schedule Page 11 item- 10) |
| 20 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. (i) With 1:4 cement mortar. (a) 10 mm thick plaster. (PWD schedule Page-189, item-1.ii.c &3rd CORRIGENDA) |
| 21 | (i) With 1:6 cement mortar (a) 15 mm thick plaster (PWD schedule Page-189, item-1.i.c & 3rd CORRIGENDA) |
| 22 | Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. (PWD schedule Page 192, item-15) |
| 23 | Brick work with 1st class bricks in cement mortar (1:6) (A) In superstructure, ground floor (PWD schedule Page 15 and 3rd CORRIGENDA) |
| 24 | Brick work with 1st class bricks in cement mortar (1:4). In foundation and plinth |
| 25 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 26 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (Pwd Schedule page176, item 7.b) |
| 27 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On steel or other metal surface : With super gloss (hi-gloss). Two coats (with any shade except white) (PWD schedule Page176, item-8.A.b.iv) |
| 28 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC.In Ground Floor: (a) One Coat (Pwd Schedule page196, item 8.a) |
| 29 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparingthe surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. (In Ground Floor)a) One Coat(i) Water based interior grade Acrylic Primer. (Pwd Schedule page195, item 7.a) |
| 30 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer)(Two coats)(i) Standard Quality. (Pwd Schedule page 201, item 4 .i) |
| 31 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat). (a) Premium 100% Acrylic Emulsion (Pwd Schedule page173, item 19 (b) |
| 32 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. |
| 33 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.10-12 Micron thickness Annodizing film Natural white For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2-track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M] |
| 34 | Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete. |
| 35 | Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5.50 mm thick interlocking designer concrete paver block M30 grade for non-traffic zone,buiding premises,garden,parks,domestic drive as per IS: 15658-2006(over 20-30 mm medium sand bed on 200mm thk bound gnaular /granular base course including cost of sand for sand bed but excluding cost of base course & subgrade preparation.)Coloured Decorative |
| 36 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) |
| 37 | Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.(a) Upto 20 users:-(i) Within a lead of 150 metre. (PWD schedule Page 90 item-3.a.(i) Sanitary) |
| 38 | Iron door handle of approved quality fitted and fixed complete:100mm x 5mm |
| 39 | one point steel (oxidised) handle of steel door and windows as directed including painting complete. (PWD schedule Page 113, item-26) |
| 40 | Iron eye of hasp bolt. PWD schedule Page 143 item-22 |
| 41 | Iron socket bolt of approved quality fitted and fixed complete. (a) 100mm long x 10mm dia bolt. PWD schedule Page 141 item-8.b |
| 42 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia..(i) 50 mm dia. boring etc |
| 43 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia..(i) 100 mm dia. boring etc. top enlargement |
| 44 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.50 mm dia. |
| 45 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. 100 mm dia |
| 46 | Submersible pump (1 HP) with control panel, cable and other fitting and fixing complete as directed by EIC.(Market Rate) |
| 47 | Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.i)50 mm dia. |
| 48 | Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.i).100 mm dia |
| 49 | Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket,bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately)50 mm dia. medium quality. |
| 50 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. (PWD schedule Page 36 item-2 Sanitary) |
| 51 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm. PWD schedule Page 80 item-6 Sanitary |
| 52 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work. 15 mm |
| 53 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. 40 mm dia |
| 54 | Supplying, fitting and fixing bib cock or stop cock.Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) |
| 55 | Supplying, fitting and fixing bib cock or stop cock.Chromium plated Concealed Stop Cock (Equivalent to Code No.514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 56 | Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(i) 550 mm X 400 mm size |
| 57 | Supplying, fitting and fixing pillar cock of approved make.a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 58 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 750 mm long. PWD schedule Page 43 item-10.ii Sanitary |
| 59 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 20 mm dia. PWD schedule Page 5 item-5 Sanitary |
| 60 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 600 mm long PWD schedule Page 43 item-9.iii Sanitary |
| 61 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 1000 litre capacity. PWD schedule Page 43 item-9.iii Sanitary |
| 62 | Labour for hoisting plastic water storage tank. (a) Upto 1st story from G.L. (PWD schedule Page 37 item- 10.(b) Sanitary) |
| 63 | Labour for punching hole in plastic water storage tank upto 50 mm dia. (PWD schedule Page 38 item- 13.(b) Sanitary) |
| 64 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.i) 5mm thick clear glass. |
| 65 | Supplying and stacking of good earth (adequate for horticulture work) at site including royalty (earth measured in stack will be reduced by 20% for payment) |
| 66 | Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 ( 8 parts of stacked volume of earth after reduction by 20%, one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary watering and finally fine dressing, levelling etc.,including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50m lift upto 1.5m complete. This includes supply of labour, tools & plants including materials.Planting hedge plants in two rows at 30cm apart |
| 67 | Supplying and Planting of different plant / trees ( Supplyingwell grown plants bushy and healthy, minimum height asspecified i.e. exposed height including all leads & lift,carriage, handling, manuring, applying presticide andfertilizer etc.B) Hedge Plants/Permanent plantsMini Tagar/China Tagar |
| 68 | Supplying and Planting of different plant / trees ( Supplyingwell grown plants bushy and healthy, minimum height asspecified i.e. exposed height including all leads & lift,carriage, handling, manuring, applying presticide andfertilizer etc.B) Hedge Plants/Permanent plantsRose graft |
| 69 | Supplying and Planting of different plant / trees ( Supplyingwell grown plants bushy and healthy, minimum height asspecified i.e. exposed height including all leads & lift,carriage, handling, manuring, applying presticide andfertilizer etc.B) Hedge Plants/Permanent plantsBeli |
| 70 | Supplying and Planting of different plant / trees ( Supplyingwell grown plants bushy and healthy, minimum height asspecified i.e. exposed height including all leads & lift,carriage, handling, manuring, applying presticide andfertilizer etc.B) Hedge Plants/Permanent plantsRangan(big) |
| 71 | Supplying and Planting of different plant / trees ( Supplyingwell grown plants bushy and healthy, minimum height asspecified i.e. exposed height including all leads & lift,carriage, handling, manuring, applying presticide andfertilizer etc.B) Hedge Plants/Permanent plantsBegambeli |
| 72 | Supplying and Planting of different plant / trees ( Supplyingwell grown plants bushy and healthy, minimum height asspecified i.e. exposed height including all leads & lift,carriage, handling, manuring, applying presticide andfertilizer etc.B) Hedge Plants/Permanent plantsHibiscus |
| 73 | Supplying and Planting of different plant / trees ( Supplyingwell grown plants bushy and healthy, minimum height asspecified i.e. exposed height including all leads & lift,carriage, handling, manuring, applying presticide andfertilizer etc.B) Hedge Plants/Permanent plantsAdenium |
| 74 | Supplying and Planting of different plant / trees ( Supplyingwell grown plants bushy and healthy, minimum height asspecified i.e. exposed height including all leads & lift,carriage, handling, manuring, applying presticide andfertilizer etc.B) Hedge Plants/Permanent plantsPoinsettia |
| 75 | Supplying and Planting of different plant / trees ( Supplyingwell grown plants bushy and healthy, minimum height asspecified i.e. exposed height including all leads & lift,carriage, handling, manuring, applying presticide andfertilizer etc.B) Hedge Plants/Permanent plantsArica Palm Please Enable Macros to View BoQ information |
