|
| 1 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 2 | Construction of Embankment with Material obtained from BorrowpitsConstruction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 3 | Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 4 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 5 | Sand Filling in Well complete as per Drawing and Technical Specifications. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 6 | PCC 1:3:6 in FoundationPlain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 7 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 8 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 9 | Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 to 1.00 kg/sqm using mechanical means. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 10 | Dense Graded Bituminous Macadam Grading-1Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 11 | Dense Graded Bituminous Macadam Grading-2Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 12 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (For BC) (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 13 | Bituminous Concrete Grading-2Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 14 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 15 | Furnishing and Placing Reinforced/ Prestressed cement concrete M-20 grade in foundation as per drawing and Technical Specification. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 16 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 17 | Providing and errection MS angle in 03 rows with diamantion 75 mm x 75 mm x 8 mm x 500 mm (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 18 | Providing and fixing insert plante with diamantion 75 mm x 6 mm x 800 mm (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 19 | Providing weep holes with 150 mm dia PVC pipe (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 20 | Cast in Situ Cement Concrete M20 Kerb Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade on M-15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 21 | Chequered terrazo tiles 20 mm thick in footpath and courtyard marbal chips of size upto 6mm in floors on 25mm thick bed of mortor 1:1:1 ( 1 lime putty:1 surakhi : 1 course sand ) jointing with neat cement slurry mixed with pigment to match the shape of the tiles including rubbing and polishing complete, as per SI 14.24 (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 22 | Supply & fixing of 9 mtr G.I. Octagonal of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikess with Double arm bracket (1 Mtr length each) on RCC foundation including the cost of foundation, foundation bolts excavation & back filling and Required T&P complete in all respect as per S.I. No. 21.2.5, 23.19, 20a1.9, 1552 & DSR 1.14.2, 2.10.3, 5.2 & 5.15 (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 23 | Supply & fixing of 7 mtr G.I. Octagonal of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikess with Double arm bracket (1 Mtr length each) on RCC foundation including the cost of foundation, foundation bolts excavation & back filling and Required T&P complete in all respect as per S.I. No. 21.2.5, 23.17, 20a1.9, 1555 & DSR 1.14.2, 2.10.3, 5.2 & 5.15 (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 24 | Providing and fixing CNC Cut MS railing of approved size by welding etc. to steel ladder railing, balcony railing, footpath railing, median railing, staircass railing, MS Angle & flat bar for cable laying in duct and similar works, including applying priming coat of approved steel primer. Ch. 32.340 to 33.310 (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 25 | Construction of K.C drain with CC block size (370 x 250mm) laid flate position (37.50 mm in length) and stone (30 cm in length) including cost of all material, labour and T&P etc. complete. Ch. 32.340 to 33.310 (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 26 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture over the plasted wall surface to prepared the surface even and smooth complete. As per DSR 13.80 Ch. 32.340 to 33.310 (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 27 | Wall painting (two coats) with plastic emulsion paint of first quality approved brand and manufacturer on undecorated wall surface to give an even shade including thoroughly brushing the surface free from mortar droppings and sand (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 28 | Construction of Crossing duct for utility shifting with 1x1000mm NP-3 HP (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 29 | Construction of 1x600 mm N.P-3 Hume Pipe Culvert (Widening) (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 30 | TRAFFIC SIGNS - GIVE WAY/ coutionary signage (90 cm equilaterial triangle) (as per IRC:67-2012)Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60) 90 cm equilaterial triangle (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 31 | TRAFFIC SIGNS - STOP (as per IRC:67-2012)Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 32 | Speed Limit Sign at Curve and Other PlaceProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 33 | Hazards Sign in front of ParapetProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 34 | Transverse Bar (Repeated Bars) for Speed Calming (Thermo Plastic Paint) Providing and Applying Hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gm /sqm area. Thickness of 15 mm is excusive of surface applied glass beads as per IRC 35. The finish surface tu be leveled uniform and free streaks and holes. Composition of thermo plastic material shall be as per table 800-3 of clause 803 of MORTH including cost of all material labour T&P etc required for proper completion of work as directed by E/I. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 35 | TRAFFIC SIGNS - SINGLE CHEVRON (NORMAL)Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 50 cm x 60 cm rectangular (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 36 | Center Line Edge Line (Thermo Plastic Paint)Providing and Applying Hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gm /sqm area. Thickness of 2.5 mm is excusive of surface applied glass beads as per IRC 35. The finish surface tu be leveled uniform and free streaks and holes. Composition of thermo plastic material shall be as per table 800-3 of clause 803 of MORTH including cost of all material labour T&P etc required for proper completion of work as directed by E/I. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 37 | Cat Eye (Raised Pavement Marker/Road Stud) Sharp Curve and Abadi Portion.Supply and fixing of Raised Pavement marker (Cat Eyes) of Avery Dennision/3M make of approved quality in size of width not exceeding 20 mm and height not exceding 20 mm made up to strong Engineering Polymer thermoplastic polyurethene with Electronic welded abrasion resistant lenses for Retro Reflective in dry and wet weather condition alone with Bituminous adhesive as per MORTH Specification. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 38 | TRAFFIC SIGNS - INFORMATIONARY SIGNS (HOSPITAL, PETROL PUMP, POLICE STATION,)Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 80X60 cm rectangle board. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 39 | TRAFFIC SIGNS - STATE HIGHWAY ROUTE SIGN BOARD / ABADI NAMEProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 45 cm x 60 cm rectangular. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 40 | Over Head Cantileaver Sign Board as per Morth Specification. (Including all material,labour,T&P,taxes&labour cess but excluding GST) |
| 41 | Supply & Erection of built up overhead structure 12.00 M to 15.00M span comprising of three vertical post of 6.00 M high made up of 350 mm N.B. havey class M.S. pipe as vertical member welded with 10mm M.S. plate at top & bottom for bearing of horizantal frame comprising of 65 mm . N.B. made havey class main pipe as of 42 mm class medium N.B. pipe bracing as per approved designed drawing with one coat of steel primer and two coats of synthetic enamle paint complate the work includes construction of RCC fundation of size 0.90x0.90M & 1.5 M deep for built up Overhead Structure including earth work in excavation , 100 mm thick Lean Concrete in 1:4:8 cement , course sand and 40 mm gauge stone balllast , RCC with 1:2:4 cement , Course sand and 20 mm stone grit including supply of grouting of 25 mm dia foundation bolts (600mm long) as per provision of structure including cost of reinforcement & shutting as per direction of Engineer in Charge. (Including all material,labour,T&P,taxes&labour cess but excluding GST) Please Enable Macros to View BoQ information |
