|
| 1 | Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods to maximum 5cm.to 7cm. and laying in layers not exceeding 0.3 m. in depth asper direction of the Engineer-in-charge. |
| 2 | Filling foundation and plinth with sand and wel watered &rammedetc . Complete including cost of sand . |
| 3 | Cement Concrete (1:4:8) by using 4cm. Size B.H.G. metal including cost, conveyance etc. complete. |
| 4 | 2.5 cm thick Artifical Stone Flooring with cement concrete (1:2:4) including punning using 12mm size hand broken granite chips as per direction of Engineer-in-charge. |
| 5 | Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete. |
| 6 | Fly ash Brick masonary in cement mortar (1:6) by using 9\" size Bricks including all cost, conveyance etc. complete. (Fn) |
| 7 | Fly ash Brick masonary in cement mortar (1:6) by using 9\" size Bricks including all cost, conveyance etc. complete. (St) |
| 8 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying. |
| 9 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying. (Cl.Base) |
| 10 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying.(St) |
| 11 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying. (Lintel) |
| 12 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying. (Beam) |
| 13 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying. (Slab) |
| 14 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 15 | 16 mm thick cement plaster (1:6) for brick work (Per 1 Sqm.) |
| 16 | Finishing walls with water proofing cement paint of approved shade on new work two coat to give an even shade including cost of paint. |
| 17 | Supplying,fitting,fixing iron pole inclding all cost |
| 18 | Providing and laying Factory made Chamfered edge cement concrete paver Blocks of required strength,thickness & size/shape made by table vibratory method to attain superior smooth finish using PU or equivelent moulds,laid in required gray colour and pattern over 50mm thick compacted bed of coarse sand compacting and proper emedding/laying of inetlocking paver block into the sand bedding layer through vibratory copmaction by using plate vibrator,filling joints with fine sand cutting of paver block as per required size/pattern,finishing and sweeping extra sand in foothpath,park,lawans,drive ways or light traffic etc.all complete as per manufactures specification and direction of Engg-in-charge 80mm thickness of M-40 grade with approved colour design pattern etc,complete (60mm) |
| 19 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismentalingthen after casting including cost of materials complete. |
| 20 | Towards photographs of Project and Display Board Cost Please Enable Macros to View BoQ information |
