|
| 1 | Supply of following size FRLS PVC multistrand twisted PVC insulated with copper conductor as per IS:694 etc. as required. |
| 2 | 1.5 sqmm |
| 3 | 2.5 sqmm |
| 4 | 4 sqmm |
| 5 | Supply of following Amp \"B\" series s/pole MCB workable on 220/240 volts AC supply etc. as required. |
| 6 | 6-32 amp single pole |
| 7 | Supply of following Amp. & pole MCB isolator workable on 220/240 volts AC supply etc. as required. |
| 8 | 63 Amp. DP |
| 9 | Supply of following Amp. Piano type Switch workable on 220/240 volts AC supply etc. as required. |
| 10 | 1 Way 5 Amp Switch |
| 11 | 1 Way 15 Amp Switch |
| 12 | Supply of following Amp. Piano type Universal socket workable on 220/240 volts AC supply etc. as required. |
| 13 | 3 Pin 5 Amp Socket |
| 14 | 6 Pin 15 Amp Socket |
| 15 | Supply of following MCCB in existing cubicla panel as reqd. |
| 16 | 4 pole 100 A 30 KA |
| 17 | 4 pole 250 A 36 KA |
| 18 | Supply of following size of PVC insulated & PVC sheathed copper conductor 3 core submersible cable conforming to IS . 694/210 etc.as rqd. 3×2.5 sqmm with voltage grade 1100 volts |
| 19 | Supplying of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80,Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast/Extruded aluminium Body (thickness>1.20mm)18-22 W |
| 20 | Supply of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum) |