|
| 1 | M&L for repairs to potholes any depth , not exc 1 sqm each including sweeping free from dust and mud or water,scoring sunken sufaces in roads ,paths, etc, cutting around edges to at least 25 mm in depth,making good by applying tack coatat 5 kg per 10 sqm putting in premixed bituminious macadam well rammed and sealed with binder 9.8Kg per 10 Sqm binded with 0.09cum of stone chipping, 6.3mm size and again well rammed (incl supply of premixed macadam, binder and chippings), depth of potholes exc 30cm completed all as specified and directed by Engr-in-Charge. |
| 2 | M&L for Scarifying or picking gravelled, macadamor bituminous macadam surfacesexc 50 and n.ex 100mm deep in area not exc 400 sqm |
| 3 | M&L for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradientand camber required type of Aggregate Granite, trap or basalt completed all as specified and directed by Engr-in-Charge. |
| 4 | M&L for Rolling and consolidating formation surfaces in cutting by exc 8 tonne and n.exc 12 tonne power roller complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for preparing surfacesof unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for applying evenly a priming /tack coat with bituminious primer at 10 Kg per 10 sqm on new surface complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for preparing to black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L using paving bitumenfor Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L forPaving bitumen any penetration Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less)complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L forPaving bitumen any penetration Bituminous premix asphaltic dense concrete 40 mm thickness with 5.5% binder content as in semi-dense asphaltic concrete complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for premixed sand seal coat with 0.06 cum of sand mixed with 6.8kg of paving bitumen, applied and rolled to a uniform surface completed all as specified and directed by Engr-in-Charge. |
| 12 | M&L for applying thermoplastic reflective paint as in road marking of minimum 2.5mm thickness, single coat as in making of 100/150 mm width using HOT mark thermoplastic pain (ot application) white/yellow by indigenous modern, propelled road marking machine as directed including all ingredients such as binder glass, beads etc complete all as specified and directed by Engr-in-Charge. |
| 13 | Supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmX125mmX25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc all as specified and directed. |
| 14 | S&Fcat eye solar reflective type of metal body alloy of size 100mmX100mmx20mm with PAMA striplens reflector of modal No DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instruction completed all as specified and directed. |
| 15 | S&F metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflector made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm hight duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 16 | S&F polycarbonate convex mirror (80cm dia) make 3M or equivalent in AUTOMAT/ACE/DARK EYE/ISI marked, polycarbonate body mounted on 16 gauge MS pipe of 75mm outer dia fixed 1.5 mtr above ground surfaces abd 60cm below ground incl PCC foundation of size 30x30x60cm with PCC 1:3:6 type C1bottom part of MS pipe welded with 5mm thick 125mm5125mm MS pipe for anchorage in PCC, MS pipe shal be painted stove enamelled paint over a coat of red oxide, incl necessary eathwork excavation in any soil, removed and disposal of spoil complete all as specified and directed by Engr-in-Charge (Note :- Convex mirror shall be as per sample) |
