Tender For Special Repair To Parking Area, Road And Hard Standing Under Ge Tenga
Tender Value
77 Lakhs
Estimated cost
Bid Submission
19 Feb 2026
0 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tenga Valley → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Parking Area, Road And Hard Standing Under Ge Tenga
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Feb-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-Feb-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Concrete 100mm thick(unreinforced)in ground floors and pavings n exc 15 cm thickness(below or above ground level)complete all as secified and directed. |
| 2 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specifie as directed. |
| 3 | Providing and laying Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement andpigment complete all as secified and directed by Engr-In-Charge. |
| 4 | M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges Type B-1 1:2:4(20mm graded agg) complete all as specified as directed. |
| 5 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 Sqm and not exc 50 mm deep completeall as specified and directed. |
| 6 | M&L for Laying and compacting in a layers of 75 mm thick each (compacted thickness) Wet Mix Macadam (WMM) grading as pe table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013. |
| 7 | M&Lfor preparingnew black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primerusing paving bitumenat 10 kg /10 sqm complete all as specified and directed . |
| 8 | M&Lfor preparingexisting black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primerusing paving bitumenat 5 kg /10 sqm complete all as specified and directed . |
| 9 | Paving premix Bitumen, macadam 4%, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. |
| 10 | Applying evenly a priming/tack coat with bituminous primer at 2.5 kg per 10 sq metre complete all as specified and directed. |
| 11 | Bituminous (Paving Bitumen and Penetration)asphaltic dense concrete 30mm consolidated thickness with 5.5% binder content as in semi-dense asphaltic concrete by weight of totalmix, rolled and compacted to required camber and gradient complete all as specified and directed. |
| 12 | M & L for Prepration of black top surfaces of road and applyingand marking 2.5mm thick centre lines, sto lines, dashes, arrows, letters, etc. and the like exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint, of approved colour conforming to BS 3262-1989 with special applicator machine all as per maniufacturers instructions complete all as specified. |
| 13 | S&F in repair Two reflective Plastic body reflective panel Amber, Red or white Road Studs (Cat Eye) of size 108x100x20mm complete all as specified and directed by manufacturer. |
| 14 | S&F in repair Supply and fixsolar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. |
AI Tender Summary
Tender Timeline
Feb 12, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender