|
| 1 | Lumpsum price worked out by the contractor for\"BUILDING &STRUCTURES”as listed inSch ‘A\" Part I representing above/below the lump sum price ofRs 825000.00 as inserted by MES for Sch ‘A’ Part I on Sl. Page No. |
| 2 | Lumpsum price worked out by the contractor for“INTERNAL ELECTRIFICATION ” as listed inSch ‘A\" Part II representing above / below the lump sum price of Rs9930.30 as inserted by MES for Sch ‘A’ Part II on Sl Page No. |
| 3 | Lumpsum price worked out by the contractor for \"EXTERNAL ELECTRIFICATION \" as listedin Sch ‘A\" Part III repersenting above/below the lump sum price of Rs 17708.29 as inserted by MES for Sch ‘A’ Part III on Sl Page No |
| 4 | Lumpsum price worked out by the contractor for \"EXTERNAL WATER SUPPLY \" as listedin Sch ‘A\" Part IV repersenting above/below the lump sum price of Rs 51104.40as inserted by MES for Sch ‘A’ Part IV on Sl Page No |
| 5 | Lumpsum price worked out by the contractor for \"ROAD/PATH \" as listedin Sch ‘A\" Part V repersenting above/below the lump sum price of Rs 129252.90 as inserted by MES for Sch ‘A’ Part V on Sl Page No |
| 6 | Lumpsum price worked out by the contractor for \"EXCAVATION & EARTHWORK \" as listedin Sch ‘A\" Part VI repersenting above/below the lump sum price of Rs 74033.60 as inserted by MES for Sch ‘A’ Part VI on Sl Page No |
| 7 | Supplying and packing washed pea gravel of size 3 mm to 5 mm free from dust, dirt or vegetable matters as per IS-4097, around the linear assembly to the entire depth of bore wellcomplete all as specified and directed.(Note:- Pea gravel shall be stacked at site and measurement of stack shall be entered in MB with reduction of voids & bulkage portion of pea gravel.Payment shall be made after deduction of voids & bulkage of pea gravel) |
| 8 | Developing the tube well with 600 PSI, 500 CFM capacity air compressor as required until clear water is obtained including transportation, errection and dismantling of air compressor complete all as specified and directed.(Note For item No 21 & 22- Development hours of each bore shall not be more than 30 hours each and log sheet of compressor machine shall be maintained and signed by JE, contractor & Engineer-in-charge.) |
| 9 | All as per Sl item No. 21 as above but by means of OP unitover pumping unit at the rate 25% above 32 LPS discharge ie 40 LPS consisting of VT pump as required until sand free water is obtained complete all as specified and directed.(Note For item No 21 & 22- Development hours of each bore shall not be more than 30 hours each and log sheet of compressor machine shall be maintained and signed by JE, contractor & Engineer-in-charge.) |
| 10 | M&L Yield testing of the tube well for continuous to 16 hrs all as specified in particular specification and as directed to determine the safe pumping yield of tube well etc. complete all as specified. |
| 11 | M&L Collection of water sample, carrying to approved analytical chemical laboratory for bacteriological, chemical and sanitary tests after the development of well complete all as desired by department to ensure the water in fit for human consumpution and inpurity ar less than the recommonded PPM as per ministry of health deparment. . Note :- If it is found not upto the standard limit, the film should treat the same with bleaching powder and arrange for pumping out the water till the water becomes bacteria free and fit for human consumption . |
| 12 | Supply,loweringand fixing MS column pipescrewed 150mm bore of class \"C\" heavy duty 3.0 m in length having wall thickness not less than 7.1 mm electric resistance welded with MS flange heavy duty on both side confirming to IS and with provn of 8 nos holes welded all around with pipe for rigidness and 4 Nos ribs 10 mm thick including 2 mm thick rubber sheet of suitable length and washer shall be confirming to IS and connecting complete all as specified and directed.(Note:- Payment of 3m length MS column pipe shall be treated as Each unit) |
| 13 | Supply and fix PVC insulated & sheathed 1100 volts grade 3 core submersible flat cable of size 16 Sqmm flat type, multi stranded copper conductor including connection to motor and starter complete including necessary joint withM seal and brass ferrule as necessary all as specified and directed. |
| 14 | Material and LabourM seal joint suitable for submersible cable water proof and with brass ferrules etc., complete for 3 core 16 sqmm copper conductor cable 1100 volts grade all as specified. |
| 15 | Supply and fixing ofconnecting piece one end flanged and other end screwed duly welded 1.5mtr long MS column pipe 150mm dia bore for connecting column pipe and NRV of submersible pump 125/150mm dia complete all as specified and directed. |
| 16 | Supply, installation, testing and commissioning of LT, 415 Volts, 4 wire AC, 50 Hz, cubical panel factory made CPRI approvedindoor,floor mountedweather & vermin proof,seven tank process, size 1200x900x500mm fabricated out of 1.6 mm thick CRCA mild steel black sheet and angle iron frame 40x40x6 mm,with bus bar chamber and separate in built sheet metal cubicles for accessories including hinged panels opening from front& back and painted with two coat synthetic enamel paint over a coat of red oxide primer of shade and tint as approved, suitable cable glands for all incoming and outgoing cable including grouting of panel board 60 cm above ground level by providing 60 cm long angle iron of size 50x 50x6 mm welded on all the four corners, embedded in plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) upto 30 cm complete all as specified and directed with and including the following accessories / components:-INCOMING (a) 04 Nos. aluminum bus bars high conductivity aluminum alloy properly insulated and colour coated-03 Nos for phase (RYB) rating 300 Amps and 01 Nos Neutral and mounted on porcelain insulator holders with necessary supports complete all as specified and directed.(b) MCCB, 3 pole, 160 Amps, 415 volts AC 25 KA rupturing capacity (01 Nos- in coming).OUTGING(c) MCCB, 3 pole, 100 Amps, 415 volts AC 10 KA rupturing capacity (02 Nos- out coming).(d) Voltmeter digital type 3 phase AC 96mm square type 0-500 volt including selector switch for reading on all three phases-01 No.(e) MCB SPN 32 Amp - 02 Nos(f) MCB TPN 32 Amp - 01 NsOn load change over switch front operated handle suitable for 125 amp 4 pole - 01 No.(g) Fully automatic star delta starter suitableup to 50 HP motor - 02 Nos(h) Motor protection relay suitable for 50 HP pump-02 Nos (Note- Pannel shal be CPRI approved and MCB & MCCB of same make) |
| 17 | Supply, install, commissionand test submersible pump set as per IS 8039/2002 and shall be ISI marked, electric driven, 415 V, TP suitable forinside bore well comprising of bronze impellors in CI casing with stain less steel shaft, sleeve etc for 200mm dia bore welldischarge capacity 1200-1400 LPM, discharge head 85-90 mtr complete all as specified and directed. |
| 18 | Supply, install and testing of high pressure single head gear motoreddozing pump of suitable for 20000 to 25000 GPH discharge capacity, line pressure of 3 Kg/cm2 and chlorination requirement from 0.5PPM to 5 PPM with accessories including lead, connecting nuts, injection check valve, clay weight, ferrules, dozing system consisting of 50 to 100 litres PE/FRE tank with lid, level gauge, single phase electric motor and agitator with shaft and blade mounted on tank. Lid must have port hole for pouring grannular chlorination chemical and water when necessary. Lid must have provision for mounting dozing pump on the lid/wall complete all as specified and directed. ( Note:- Liquid end of the dozing pump including accessories shall be of non metallic). |
| 19 | Taking down and refixing and commissioning of liquid based liquid chlorine dosing plant complete with dozing pump, Dosing tank and pipe connection etc complete all as specified and directed. |
| 20 | Supply only calcium Hypo Chlorite Chlorine content 65% to 70% (Calcium based high strength granular) decomposes clear in water solution, free of foreign matter, the chlorination chemical should contain appropriate quantities of dispersants, corrosion inhibitors to prevent encrustation scaling in distribution chlorination complete all as specified and directed. (Make-Sree Rayalaseema Hi- Strength Hypo Ltd Model Purichlore or equivalent make as per approval of GE).(Note:- Testing report of chemical includes toxicity testing of authorized lab must be submitted by contractor along with chemical)\" |
| 21 | M&Lcentrifugally cast (spun) ductile iron pressure pipes 150 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in anylength for classification of K-9 suitable for rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 complete all as specified and as directed .(Note :- Rubber gasket joint should be included in quoted rate). |
| 22 | M&L cast iron fittingssuch as bends tapersto pieces( Single or double) branch pieces any type, straight, connecting pieces, socket, collars, caps, plugs, flanges/spigot with nut, bolts and washers up to 150mm diacomplete all as specified and directed. |
| 23 | M&Lcast iron fittingssuch as bends tapersto pieces( Single or double) branch pieces any type, straight, connecting pieces, socket, collars, caps, plugs, flanges/spigot with nut, bolts and washers for 200 mm to 300mm dia complete all as specified and directed. |
| 24 | M&L ductile iron fittings upto 250mm bore such as bend, (any type, radius and angle) tapers of any type (straight bend, decreasing, increasing, flanged or double socketed etc) tail pieces, tee, single branch, \"Y\" junction, double branch, cross collar, cap, plug etc including push on joints(tyton)complete all as directed. |
| 25 | Supply & fixing ofsluice valves 150 mm dia class PN-1.6, IS-14846with flanged ends, stainless steel spindle and iron wheel includingnut boltsand rubber packing complete all as specified and directed. |
| 26 | Supply & fixing sluice valves 200 mm dia class PN-1.6, IS-14846with flanged ends, stainless steel spindle and iron wheel includingnut boltsand rubber packing complete all as specified and directed. |
| 27 | M & L construction of valve pit chamber 1250 x 1250 x 1000 mm internal dimensions,6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary excavation & earth work, brick work with sub class \"B\" bricks old size inCM (1:6), 230 mm thick,PCC bed (1:4:8) type D2 using 40mm graded stone aggregate 150 mm thick, 15mm thick redndering in CM (1:4) finished even & fair and applying a coat of black bituminous paint to the steel surfaces complete all as specified and directed. |
| 28 | EXTERNAL ELECTRIC SUPPLYSupply, laying, jointing, testing & coimmisisoning in trenches, ducts or fixing in wall or passing through pipe XLPE insulated screened PVC bedded, galvanised stirp or wire armoured electric power cable (heavy duty) with stranded aluminum conductor 1100 volts grade, cross sectional area 70 sqmm, 3.5 core suitable for earthed system complete all as specified and directed. |
| 29 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x6 mm thick buried directly in ground (earth pit not less than 2.5 m deep below GL) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 32x6 mm as earthing lead by means of bolts, nuts check nuts and washers of GIor steel connected to earth test point, earth pit with PCC 1:3:6 type C-1 using 20mm graded stone aggregate, precast RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate, reinforced with 03 Nos TMT bars 8mm dia both ways all as shown in electrical plate No-3 of SSR Pt-I work includes for necessary excavation earth work PCC pit and RCC cover, funnel salt ,charcoal dust, GI water pipe 20 mm dia & protection pipe 40 mm, dia light grade for strip complete all as specified anddirected. |
| 30 | INTERNAL ELECTRIFCATIONM & L concealed point wiring on wall and surface wiring on ceiling/roof/trusseswith necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multistranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and includingrigid metallic MS conduit 16 SWG ISI marked not less than 20mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly covered with bakelite laminated sheet 3mm thick, ISI marked for mounting of switches / sockets, fan regulators with brass screw and cup washers including PVC-FRLS insulated and unsheathed copper multistrand conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthingcomplete all as specified and directed for the following :-(a) One light /fan point, controlled by one, one wayswitch |
| 31 | (b) All as per item No 45 here-in-before but for one 5/6 Amp socket point controlled by one switch on independent board. |
| 32 | (c) All as per item No 45 here-in-before but for one 5/6 Amp socket point controlled by other switch on same board. |
| 33 | (c) All as per item No 45 here-in-before but for for power point wiring 2.5Sqmm PVC-FR insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable and 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable as continous earth lead. |
| 34 | S&F ceiling fan 1200 mm sweep 5 star ratingBLDC complete with down rod and accessories (without regulator)and electrical connections with 3 core coppper cable 1.5mm sqmm from ceiling rose to fan complete all as sspecified and directed.(Make- HAVELLS ModelPACERor equivalent in other makes given in Appendix \"B\" duly approved by GE). |
| 35 | S & F factory made epoxy powder coated Distribution Board SPN 4ways ( SPN MCB DB ) with metal door ( IP-43 protection ) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Ampscopper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with Knockouts andin concealed position complete all as specified and conforming to IS : 8623 complete all as specified & directed. |
| 36 | S & FMCB SPN, 63 Amps, 240 Volt, 50 Hz, AC made from moulded self-extingushing thermostat plastic and suitable for \"B\" curve, 10 KA breaking capacity complete all as specified & directed. |
| 37 | All as per item No 48 here-in-before but SP 06 to 20 Amps |
| 38 | M&L sub main wiring with two runs of single core PVC - FRLS 2.5 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable 1100 voltsgrade, drawn in and including rigid non metalic PVC conduit,ISI marked medium grade not less than 20mm dia including all necessary fittings and accessoriessuch as tee, bends, reducers, elbow, bell mouth, tube ends and all fitting accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed porperly on as in concealed position on wall and surface position on ceiling (roof/trusses including cutting chases) and including one run of PVC insulated and unsheathed single core PVC -FRLS cable with copper conductor of size 1.5 Sqmm as earth wire (green in colour ) run through MS rigid conduit and connected to commonearth dolly , including making good disturbed surfaces to match with existing surfaces complete all as specified and directed.Note: Two run of 2.5 sqmm single core cable and one run of 1.5 sqmm single core earth copper conductor and one run of PVC conduit will be measured and paid as one unit length. |
| 39 | Supply and fixing of LED tube light fitting boxe type alongwith LED tube rod 20 watts and fix with ceiling rose complete all as specified Make: Havells Cat No LHEWEBP71N1WO20 or equivalent in other makeas as given in Appendix \"B\" |
| 40 | S&F wall security light fitting energy saving & environmental friendly long life versatile pressure die cost aluminium IP-66 road way luminaries with high power LED as a light source with toughened glass of 25W LED fittings alongwith GI bracket made out of GI pipe 25mm dia medium grade of 0.75mtr length including 02 Nos.25x3 mm flat iron clamps grouted on walls and provision of threee ore flexible of 1.50 sqmm copper conductor cable from ceiling rose to lght fitting and other flexing arrangement as required at site complete all as specified and directed.Make: Wipro cat part No LR02-291-XXX-57 XX,Havells Cat No LHETAXU7PA6J025 or equivalent in other makeas as given in Appendix \"B\" |
