|
| 1 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.complete all as specified and directed. |
| 4 | Demolition cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed. |
| 5 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 6 | Demolition concrete of any description and in any position not otherwise specifically provided cement concrete complete all as specified and directed. |
| 7 | Dismanteling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 8 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed |
| 9 | M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished without using extra cement complete all as specified and directed. |
| 10 | M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cementto on brick masonary wall surfaces or onfair faces of brick masonaryfinishedeven and smooth without using extra cementcomplete all as specified and directed. |
| 11 | M&L rendering 5 mm thick in CM 1:3as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for PCC 1:2:4 ( 20mm graded stone aggregate ) as in copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 13 | M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed. |
| 14 | M & L 40 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed. |
| 15 | M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 16 | M & L Glazed ceramic coloured tiles (square/ rectangular) with borderin vertical surface 300 mm x 450 mm / 300x600 x 7mm thick set and jointed in neat cement slurry andpointed in white cementor colouredcement to match the surface incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 17 | M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 18 | M&L providing non- skid glazed joint free ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but n exc 0.36 sqm, in dado/skirtingetcincluding 10 mm thick renderingin CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement includingto matchcoloured tiles complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 19 | M&L for Vitrified light shadeceramic tiles 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqmin floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over andincl 15mm thick screed bedin CM 1:6 completecomplete all as specified and as directed.Note : Engr-in-Charge will select sample from latest catalouge. |
| 20 | M&L for Vitrified light shadeceramic tiles 10 mm thick (square / rectangular) polished area of each tile not exceeding 0.36 sqmin skirting/dado etc., set and jointed in neat cement slurry and pointed in whiteor coloured cement to match the shade of tile over andincl 10mm thick renderingin CM 1:4 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 21 | M&L for Heavy dutytiles 12 mm thick (square / rectangular) polished area of each tile not exceeding 0.36 sqminetc., set and jointed in neat cement slurry and pointed in whiteor coloured cement to match the shade of tile over andincl 15mm thick renderingin CM 1:6 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 22 | M&L 18 to 20 mm thick granite of black colour (table rubbed and polished) as in windows cill, in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified as directed. |
| 23 | M&L for 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed. |
| 24 | M&L 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed |
| 25 | M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed. |
| 26 | M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed. |
| 27 | M&L in repairs formachine pressesd pre-cast cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregate) kerb stone including weathering, slightly rounded or chemferred angles and throating complete all as specified. |
| 28 | M&L in repairs for machine pressesd coloured glazed chequered cement concrete 20cm x 20cm x 25cm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar 1:6, complete all as specified and directed. |
| 29 | M&L Removal of Existing Waterproofing Treatment and clean the surface.(a) Bonding Coat: Cleaning the surface with wire brush, water jet etc to remove dust, dirt etc. On clean surface applying a bonding coat of Asian paints Smartcare Multi Purpose Polymer mixed with cement (1:1.5) to reduce the existing surface porosity and as a bond coat for the new surface sceed on the top of the same.(b) Resurfacing : Applying and Laying a avg 15 mm thick layer of cementitious polymer modified mortar on the top of the bond coat as per manufacturer\"s instructions in existing gradient/ slope. Polymer will be added @ 8% to the weight of cement. Solid content of the polymer not less than 54%. The newly constructed surface to be cured with clean water at least for 10 days before applying WP membrane. (c) Surface Preparation:The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of screed shall be done with wire brushing to attain smooth levelled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar, Making of Coves/ vata at the junction / corners in using MPP polymer mixed with cement : sand as per manufacturer\"s instruction for mortar & water curing the same. after curing period of 72 hours proceed with applicationof Polyurethane coating.(d) Liquid Applied WP Membrane: Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethene with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner). Epoxy primer will be done at consumption of 0.2Kg per sqmt. |
| 30 | supply Integral water proofing Liquid of Dr fixit/sika/Fosroc |
| 31 | S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples in m s window / wooden shutter complete all as specified and directed |
| 32 | S&F aluminium alloypowder coated aluminium door frame fixed with side hung shutters and glazing or composite panel LDPE core PET coating (both side decorative type) fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 63x38x1.48mm thick with rawl plug(b) Middle and lock rail : 85x44x1.48mm thick(c) Bottom rail : 114x44x1.48mm thick(d) Top rail/style : 114x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty (Make Sandhu ISI marked or its equivalent approved make)(g) Making good of wall surface to match with existing surface complete. |
| 33 | S&F Powder coated aluminium sliding windows and frame with movable shutter (sliding on minimum two PVC roller of best quality on twotracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below:-(i) Window frame :63x35mm X 1.15 mm thick for two tracks.(ii) Top/bottom rail and style / rail of shutter : 19x38x1.15 mm thick and over.(iii) Aluminium beading - 0.7mm thick(v)Aluminiumfittings suchaluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. |
| 34 | S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed |
| 35 | S&F in Repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy dut fixed complete all as specified and directed. |
| 36 | M&L for repairing to existing aluminium doorsof any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed. |
| 37 | S&F in repairPVC hollow interlocking wall paneling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm.The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement. |
| 38 | S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system) hoistedand fixed in position all as pacific SSR Part- I including dismantling ofexisting water tanks capacityn exc 1000 ltr complete all as specified and directed. |
| 39 | S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacityn exc 500 ltr complete all as specified and directed. |
| 40 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed |
| 41 | S&F in repair 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed |
| 42 | S&F GI tube 15 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed. |
| 43 | S&F GI tube 20 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed. |
| 44 | S&F in repair20 mm dia stainless steel 1.0 mm thick fancy typedroppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed |
| 45 | S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mmbore HDPE waste down pipe including Stainless steelbrackets all s directed. |
| 46 | S&F in repairsvitreous chinaware coloured wash hand basin with pedestalofsize 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling, waste pipe, complete fixing arrangementand cutting for and pinning in walls & making good complete all as specifed and directed. |
| 47 | S&F inVitreous China counter top oval type colouredwash basin suitable size including swan neck pillar taps with bottle trap ,but including waste pipe fixing on counter with stainless steel brackets complete all as specified. |
| 48 | S&F in repairs 15 mm dia pillar tapfancy type chromium plated complete all as specified as directed. |
| 49 | S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turncomplete all as specified as directed. |
| 50 | S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified. Make hindware or equivalent |
| 51 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 52 | S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm, complete all as specified. Make Jaguar or equivalent |
| 53 | S&F in repair stainless steel of AE - SI 316 grade tubulartowel ringincluding apair ofCP brass bracket complete all as specified. |
| 54 | S & Fin repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified. |
| 55 | S & F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 360x675x750 mm, S trap- 300 mm make Jaguaror equivalentincluding making good to floor complete all as specified and directed. |
| 56 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified. |
| 57 | S&F in repair vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with \"P\"or \"S\" trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. Make Hindware / parryware or equivalent |
| 58 | S&F in repair vitreous China coloured European type WC with \"P\" or \"S\" trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. |
| 59 | S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .Model:Sleek fresh dual flush of Hindware Model No Pastel size 47.6x15.5x32, Parryware Cat No 8177*, CeraCat No B1810110 snow white\" |
| 60 | S & F Brass CP health faucetwith 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hookscrewecd for iron pipe fancy type long body all as specified and directed. Model :ALD 573 of Jaquar ,Hindware Model No F160002, Parryware Model No T9961A1\" |
| 61 | S&F in repairPVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, typeB-1 complete all as specified and directed. |
| 62 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fitting complete all as specified and directed by Engr-in-charge. |
| 63 | S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fittingcomplete all as specified and directed. |
| 64 | S&F PVC (SWR) 110mm bore bends anyradiuscomplete all as specified and directed. |
| 65 | S&F PVC (SWR) 75mm bore bends any radiuscomplete all as specified and directed. |
| 66 | S&F PVC (SWR) 75 mm bore junction single (Single \"T\") equal or unequal with access doorcomplete all as specified and directed. |
| 67 | S&F PVC (SWR) 110 mm bore junction single (Single \"T\") equal or unequal with access door complete all as specified and directed. |
| 68 | S&F in repair designed looking mirror size exc 0.54 sqm to 0.75 sqm of selected quality glass, mounted on 6mm thick fixed to wall with wooden plugs with chromium plated brass screws and cup washers,complete all as specified and directed. |
| 69 | Material and labour 20-25 mm wide 20 to 25mm depth expansion joints filled with preformed compressible filler board (Silfex supremen base) precut of specified depth provisionof closed cell polythene back up rod 25 mm dia (minimum depth over back up rod shall be 14 - 15mm) 02 coats of priming the vertical side of joints and sealing the joints (Top 12mm with and using cold applied polyurethane sealent confirming to requrement of BS - 5212 type FB and applying masking tape on edge at joints to prevent accidental spillage of sealant and removing the masking tape after sealent is applied Sealent should have MAF minimum -+ 30% and manufacturers warrenty for 10 (ten) years complete all as per manufacturer instructions and rate incl for whichever PQC repair upto 0.05 Sqm and depth upto 100mm or along expension joints with epoxy+hardner complete all as specified anddirected.Note :- Rate included for taking out all existing filling material including cleaning preparation surfaces for filling new sealing material. |
| 70 | Material and labour 8 to 15mm wide 22-25 mm deep construction joints 02 coats of priming and providing a back up rod 10mm dia and sealent with using cold applied polyurethane sealent (Top 10 mm leaving 2-3 mm recess) confirming to requrement of BS 5212 type FB and applying masking tape on edge at joints to prevent accidental spillage of sealant and removing the masking tape after sealent is applied Sealant should have MAF minimum + 30% and manufacturers warrenty for 10 (ten) years complete all as per manufacturer instructions and rate incl for whichever PQC repair upto 0.05 Sqm and depth upto 100mm or along expension joints with epoxy+hardner complete all as specified anddirected by Engineer-in-Charge.Note :- (Rate included for taking out all existing filling material including cleaning preparation surfaces for filling new sealing material.) |
| 71 | M&L for removing existing road marking paint if required and painting on old painted surface for painting lines, dashes, arrows,letters etc on roads, pavements and like etc with thermoplastic paint 2.0mm thick, white or golden yellow after cleaning surfaces complete all as specified and directed.Note :- Rate included for taking out all existing painting including cleaning preparation surfaces for new painting. |
| 72 | M& L for preparation of newly plastered wall surfaces and applying three coats of texture (Domasc ) finished painting with the following process the surfaces should be completely dry and free from loose particles including preparing the surface with emry paper 180 nos and wipring clean and applying one coat of primer and allow drying for 6 to 8 hours then smoothen the surface by filling dints with thin coat of acrylie wall putty after drying for 4 to 6 hours and preparing the surface with emry paper and clean and applying another coat of primer and allow drying for 6 to 8 hours and then emulsion 1 Ltr with 500 ml water and applying with brush follwed by rolling with sponge roller or filter roller, applying three coat with brush and roller with and interval of 3 to 4 hours between successive coat all as per manufactures instruction complete all as specified and directed |
| 73 | M& L for preparation of newly plastered wall surfaces and appltying three coats of texture (Rustic) finished painting with the following process the surfaces should be completely dry and free from loose particles including preparing the surface with emry paper 180 Nos and wipring clean and applying one coat of primer and allow drying for 6 to 8 hours then smoothen the surface by filling dints with thin coat of acrylie wall putty after drying for 4 to 6 hours and preparing the surface with emry paper and clean and applying another coat of primer and allow drying for 6 to 8 hours and then emulsion 1.0 Ltr with 500 ml water and applying with brush follwed by rolling with sponge roller or filter roller, applying three coat with brush and roller with and interval of 3 to 4 hours between successive coat all as per manufactures instruction complete all as specified and directed |
| 74 | M&L for preparation of newly plasted wall surfaces and appltying three coats of texture (Super fine) finished painting with the following process the surfaces should be completely dry and free from loose particles including preparing the surface with emry paper 180 nos and wipring clean and applying one coat of primer and allow drying for 6 to 8 hours then smoothen the surface by filling dints with thin coat of acrylie wall putty after drying for 4 to 6 hours and preparing the surface with emry paper and clean and applying another coat of primer and allow drying for 6 to 8 hours and then emulsion 1 Ltr with 500 ml water and applying with brush follwed by rolling with sponge roller or filter roller, applying three coat with brush and roller with and interval of 3 to 4 hours between successive coat all as per manufactures instruction complete all as specified and directed |
| 75 | M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats ofoil bound distemper over 1mm thick cement based in double layer wall care puttycomplete all as specified and directed. |
| 76 | M&L for preparing newly plastered walls surfaces and applying two coats ofoil bound distemper over1mm thickwall care puttycomplete all as specified and directed. |
| 77 | M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coatof white wash complete all as specified and directed. |
| 78 | M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 79 | S&F 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts , in roofs, walls etc. with grade of zinc coating 275. |
| 80 | M&L preparation new or previously untreated steel surfaces with camouflage painting of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coatof red oxide zinc chrome primer complete all as specified anddirected by Engineer-in-Charge. Note :- Rate included for scaffolding as required for Hanger building. |
| 81 | M&L for pavement quality concrete(PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15 2017, coarse aggregate of clean , hard strong, dense non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both usingminimum 360 kg/cum of cement with non-circular virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum meltingtemperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50 m width ,including curing and tining by Texturing cum Curing Machine complete all as specified and directed. Required surface texturing to be done as specified in Clause - 10. 1. 14 and Table: 9 of IRC\" 15-2017 |
| 82 | M&L forcomplete removal of existing treatment and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 4 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower incl preprations of old surface complete all as specified and directed. |
| 83 | M&L forpreparation ofolddecoratedplastered or unplastered surfaces of walls and applying one coat of distemper oil emulsioncomplete all as specified and directed. |
| 84 | M&L for raking out joints/ pointing to brick work in walls or to bricks tiles, laid flat, in floors, surface channels, roofs, etc. in cement mortar |
