|
| 1 | M&L for providing and erectingself -Supported steel H- Frame Scaffolding at site for structural repairs of sump slab with micro concrete or columns jacketing with cross bracings of good quality without dents and corrosion to reach place of work including approaches, extension, working platform ladders, lifting tackle necessary wall anchors for men and materials till completion of all structural repair items of work and curing period etc. complete all as specified & directed . Note:-(a) The work shall be carried out with all the safety belt and adequatelabourinsurance under the supervision of a qualified supervisor. (b)This item shall be used only for structural repair workof sump. (c) Payment shall be given only once irrespective of duration of scaffolding |
| 2 | Breaking carefully the loose concrete of distressed member without damagingexisting strong concrete by means of sharp chisel (which should tempered regularly with high frequency low impact hammers), cleaning the surface bywater jet pressure pump at 4 to 5 kg/ sqcm pressure to remove chlorides and loose particles , air dryingthe surface etc complete all as directed.Note:- The work shall be carried out with all the safety measures like helmet, safety belt and adequate labour insurance under the supervision of qualifiedsupervisor etc.( The damaged ceiling / concrete will be measured). |
| 3 | M&L forCleaning the existing reinforcement with hammer tapping and wire Brush/ rotary wire brush, fixed to hand drill machine, making the surfaces free from loose corrosion material, dirt scaling etc. complete,Applying two coats of polymer basedalkaline rust converting primer conforming toASTM-B 117 by means of paint brush,liberally all over in two coats with1 hour interval between the coats all as per manufacturers instruction.Note:- The product shouldconverts the rust in to stable oregano metalliccomplex molecule layer, this should also actas primer to further treatment of steel etc.complete . The work should be carried out with all the safety belt and adequate labour insurance under the supervision of qualified supervisor. etc. complete all as specified and as directed (The damaged celling/ concrete shallbe measured) |
| 4 | M&L for Providing and applying approved epoxy resin EPI / NITO Bond of Krishna conchem or equivalent before polymer plaster / concrete to have perfect bond between old concrete and new concrete/ polymer plaster surface conforming toASTM-C- 882-87 using nylon brushes scaffolding labour etc. complete all as specified and as directed. |
| 5 | M&L for Making up lost section of concrete / mortar using up to30 mm thick thixotropic repair mortar with one component thixotropic dual shrinkage compensated fibre reinforcement formulation for structural members, building up section by hand packing as per manufacturers specification , applied by meansof hand gloves by expert applicator, the rehabilitated surface should be free from air gaps, voids and should be in line with existing surface, including curing, cleaning the area etc.The work should be carried out with all the safety measures like helmet, safety belt and adequate labour insurance under the supervision of qualified supervisor etc. complete all as specified and as directed. |
| 6 | M&L forProviding and applying 5 mm thick polymer mortar to load carrying R.C.C member in two layers in proportion of 1:5:15 by weight with polymer of approved quality and make, cement and wash quartz s and with required W.C. ratio for desired floating, curing after initial setting time etc. complete all as specified and as directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 8 | Demolition of plain cement concrete (un-reinforced) in ground floors, pavings and in foundations not exceeding 15cm thickness (below or above ground level) including removal of demolished material out side MD land complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for 100 mm thick plain cement concrete1:4:8 typeD2using 40mm graded stone aggregate as in floors , paths, pavings etccomplete all as specified and as directed. |
| 10 | M&L for 50 mm thick plain cement concrete 1:2:4 typeB- 0,using 12.5mm graded stone aggregate as in floors , paths, pavings etc surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 11 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compoundgrade \"A\" complete all as specified and as directed. |
| 12 | M&L for 15 mm thick screed bed or bedding layer of mortarin cementmortar 1:4 for laying floor finishes complete all as specified and directed. |
| 13 | M&L Non - skid Ceramic tiles 7 to 8 mm thicksquare/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and as directed. |
| 14 | M&L for coloured glazed ceramic tiles 450x350x7mm thick, in dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a back coat of rendering 10mm thickin CM 1:3 complete all as specified and directed by Engr-in-Charge. |
| 15 | Taking down cementor cement lime plaster, any description, on brick walls including racking out joints hacking for keyscrubbing down with water etc.complete all as specified and as directed. |
| 16 | M&L for rendering 15mm thick on other than fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement complete all as specified and as directed. |
| 17 | M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement complete all as specified and as directed. |
| 18 | M&L for rendering 5mm thick on fair faces ofconcrete surfaces in cement mortar 1:3in ceiling surface finished even and smooth with out using extra cement complete all as specified and as directed. |
| 19 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 20 | M&L for preparation of newly plastered surfaces of walls and applying two coats of Exterior emulsion paint over a coat of primer complete all as specified and as directed. |
| 21 | M&L for preparation of new plastered surfaces and applying two coats ofwhite wash on ceiling complete all as specified and as directed. |
| 22 | Taking down chowkats or frames (without taking off shutters from frame ) not exceeding 1.5 sqm each all as specified and directed.(including cutting holes for removing / inserting hold fasts and making good disturbed portionswith PCC 1:2:4 type B-0 or in CM 1:4 after re-fixing of frames) complete all as specified and as directed. |
| 23 | Taking down chowkats or frames (without taking off shutters from frame ) exceeding 1.5 sqm but not exceeding 4 Sqm each all as specified and directed.(including cutting holes for removing / inserting hold fasts and making good disturbed portionswith PCC 1:2:4 type B-0 or in CM 1:4 after re fixing of frames) complete all as specified and as directed.. |
| 24 | S&F Powder coatedaluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed. |
| 25 | S&FPowder coatedaluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 26 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement andas per direction of Engineering-charge. |
| 27 | S&FGalvanised mildsteelwire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and as directed. |
| 28 | S&F 4.8 mm thick Sheet glass, ordinary quality and glazing with rubber beading in square n.exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 29 | S&F 4.8 mm thick Sheet glass, ordinary quality and glazing with rubber beading in square exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 30 | S&F Pressed steel frames 105 x 60mm size for doorswith single rebate including necessary fixing lugs, hinges, lock strike plate, etc complete including one shop coat of red oxide primer, providing mild steel 6 mm dia threshold bar and filling hollowframe with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate)complete all as specified and as directed. |
| 31 | S&F Factory made 2nd class hardwood , 35mm thick ,Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 32 | S&F Factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawings (shown in SSR Part II) complete. |
| 33 | S&F Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing (shown in SSR Part II) complete. |
| 34 | S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 35 | S&F 125 mm size Aluminium butt hingesextruded aluminium alloy with galvanised steel wire pin anodised, type B-21 all as specified and directed. |
| 36 | S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section fixed in repairs all as specified and directed. |
| 37 | S&F 150 mm long Aluminium alloy handles cast type anodised all as specified and directed. |
| 38 | Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed by Engineer-in-Charge |
| 39 | M&L for Brickwork with sub-class `B\" old sizebricks, straight or curved on plan exceeding 6m mean radiusbuilt in cement mortar 1:6 all as specified and directed as directed by Engineer-in-Charge. |
| 40 | M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier. |
| 41 | M&L for preparation of newuntreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer |
| 42 | Taking up or down 15mm bore steel tubing and connections complete all as specified and as directed. |
| 43 | Taking up or down 20mm bore steel tubing and connections complete all as specified and as directed. |
| 44 | Supplying and laying 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 45 | Supplying and laying16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 46 | Dismantling PVC water tanks of capacity exc 500 litre & n exc 1000 litres and removing to store |
| 47 | S&FRotational moulded polyethylene water storage tanks conforming to IS : 12701 - 1996 (cylindrical vertical with closed top) of 1000 Ltrs capacity complete all as specified and as directed. |
| 48 | S&F in repair 15 mm bore pillar taps CP brass with capstone head with or without lettered hot or cold fancy type heavy duty complete all as specified and as directed. |
| 49 | S&F in repairs low levelflushing cistern PVC valveless, syphonic action type 10 litres capacity, white with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 50 | S&Fin repairs 32mm dia PVC waste pipe complete all as specified and as directed. |
| 51 | Taking down and removing of existing waterproofing treatment of any description completely and taking down of old cement plaster if any or roughening of surfaces and cleaning the top surfaces of RCC slab using wire brushes and with water to remove all the dust and loose particles etc complete all as specified and as directed. |
| 52 | M&L for rendering 15mm thick in cement mortar 1:3 on roof/concrete surfaces using water proofing compound as per manufacturers instructions, surfaces finished even and smooth without using extra cementcomplete all as specified and as directed .Note:-Supply only water proofing compound/ admixture shall be measured and paid separately. |
| 53 | Supply only liquid water proofing compound/ admixture of approved make. |
| 54 | M&L for applying water based polyurethane modified dispersion (single component, cold applies, on toxic VOC) in 03 coats including o1 coat of epoxy primer @ 0.15kg per sqm in two coats complete as per manufacturer\"s instructions and as directed by Eng-in-Charge. |
| 55 | S&F in repairs bib taps, CP fancy typewith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia and fixed complete all as specified and directed. |
| 56 | S&Fin repair PVC connections both end brass union and length 600 mm long for 15mm bore pipe as fixed in repairs. |
| 57 | S&F in repair angle valve, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. Brand : Cera/ESSCO |
| 58 | S&F steel framed work such as grill grating etc, with ends bars shouldered and/or riveted of forged into spikes, framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railings, frame work of water tanks and similar work conformingto Fe- 290Gde E-165 and portions frame framed and hung as gates including pintle hinges, steps hand-made sliding bolt etc |
| 59 | S&F in repairs 15mm dia stop valve cast copper alloy CP fancy type long shank and cup complete all as specified and directed. |
| 60 | S&F in repairs 550x400 mm size vitreous china wash hand basin, white with flat back with CP brass waste coupling and PVC flexible waste pipe complete all as specified and directed. |
| 61 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern) including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium or aluminised hinging device complete all as specified and directed. |
| 62 | S&F in repairs Gun metal globe or gate valves with iron wheel head screwed both ends for iron CPVC 20 mm bore and fixed as in repair complete all as specified and as directed. |
| 63 | S&F Ball brass valves, 20mm bore ,high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 64 | M&L in repairs 32mm dia waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flanged ends bedded in red lead cement complete all as specified and directed. |
| 65 | M&Lfor preparing old surfaces of walls plastered or uplastered including brooming down or wire brushing, scrapping down, and applying one coats of Exterior emulsion paintto match existing surfaces complete all as specified and as directed. |
| 66 | M&L preparing old surfaces of walls plastered or uplastered including brooming down or wire brushing, scrapping down and applying one coat of Oil emulsion Distemper complete all as specified and as directed. |
| 67 | M&L for providing 75 mm thick PCC 1:3:6 type C2 (40 mm graded stone aggregate) as in plinth protection, ramp etc complete all as specified and as directed. |
| 68 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil all as specified and as directed. |
| 69 | Removing excavated material (soil) to a distance exc. 250 metre but not exc 500 metre and depositing wheredirected at a level not exceeding 1.5 metre above the starting point. |
| 70 | M&L for hard-core of gauge n.exc 63mm, with broken stone/boulders deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 71 | M&L 75mm thick cement concrete 1:4:8type D2 (40mm graded stoneaggregates) as in sub base complete all as specified and as directed |
| 72 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry with mixture of white and grey cement in equal proportion and no pigment in floors overand includig 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 73 | Excavationin trenches notexc. 1.5 metre wide and not exc. 1.5 metre in depth for foundations etc or for shafts wells, cesspit manholes , pier holes not exc 10 sqmon plan and not exc 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed. |
| 74 | Excavating over areasn.exc 1.5 m deep and getting outin soft/loose soil complete all as specified and directed. |
| 75 | M&L for PCC (1:4:8)type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed. |
| 76 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in surface channels and drain complete all as specified and directed.Note:- Forming fair finished channelshall be measured & paid separately). |
| 77 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed. |
| 78 | M&L for PCC (1:2:4)type B-1 using 20mm graded stone aggregate as in bed plate, coping etc (incl formwork), slightly rounded angle as directed finished even and fair complete all as specified and directed. |
| 79 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregates as in concrete bed to drain pipes of 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 80 | M&L for 150mm diaReinforced concrete pipes, Class NP3 laid and jointed with ad incl collars complete all as specified and directed. |
| 81 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 mixed with WPC, finished even and smooth without using extra cement |
| 82 | M&L for rendering 15 mm thick onexternal faces of brick work or concrete surface in CM 1:4 mixed with WPC, finished even and smooth without using extra cement |
| 83 | Supply only integral water proofing compound (ISI marked) |
| 84 | Returning filing in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick in soft / loose soil complete all as specified and directed. |
| 85 | Removing excavated surplus soil to a distancenotexceeding 50 mtr depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed. |
| 86 | M&L for precast reinforced concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in manhole cover slabset in CM 1:4 including necessary form work complete all as specified and directed. |
| 87 | M&L for Mildsteel high strength TMT bars as in reinforcement 8 mm dia cut to length bent to shape required including cranking. bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed. |
| 88 | S&F LLDPE septic tanks of capacity-1000 litre with \"3 Chamber Baffle Design\" suitable for discharge into any underground sock-away system,Tanks to be Rotationally Moulded using PLC Numerically controlled machines, in tough LLDPE (Polyethylene), dimension overall dia 1395mm, overall length 2600mm, Height 2600mm, wall Thickness - 10mm, no. of chambers-03, no. of manhole-01 complete all as specified and as directed. Note:- The quoted rate shall be inclusive of earthwork Excavation, returning filling , removal of balance soil , foundation as directed by manufacturer and all accessories required. |
| 89 | M&L for construction of 3.0m dia soakage well having effective depth 4.5m including foundation, earthwork, excavation,wallls of honeycombed masonry with top ring of M25 grade concrete intercepting chamber and screen chamber made of brick masonry, RCC cover slab of M25 grade concrete/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats etc. complete all as specified and shown on TD drawing of CWE (AF) TVM. |
| 90 | M&L for Replacement of existing Sluice valve 100 mm dia, Class PN 1.6 complete set as per site requirementincluding required specials for connection with PP-R pipes complete all as specified and as directed. (for existing 100 mm pipeline) |
| 91 | M&L for Replacement existing foot valve, without bypass arrangement, vertical installation, flanged type for galvanised pipe of 80 mmbore as per IS 4038 including suitable flanges, bolts & nuts etc complete all as specified and directed. |
| 92 | M&L forReplacement of cast iron non return valve rising spindle of 80mm bore as per IS5312 part 1 PN 1.6 including nuts, bolts including taking out old unserviceable valvecomplete all as specified and directed. |
| 93 | Taking up cast iron water mains of 80mm (including all fittings), with flanged ends including disconnecting pipes and fittings complete all as specified and directed. |
| 94 | Supply and laying of galvanised \"medium class\" pipe 80mm diaincl fittings all as specified and directed. |
| 95 | Taking up cast iron water mains of 150mm (including all fittings), with flanged ends including disconnecting pipes and fittings complete all as specified and directed. |
| 96 | Supply and laying tubes, \"medium grade\" galvanised of 150 mm dia with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 97 | Supply and fixing in replacement of CI bend (any type, any radius and angle) tapers any type (straight bends, increasing or decreasing or double socket etc) Tee pieces single branch, double branch cross (all socket or socket and spigotted/ flanged), collar, caps and plugs all as specified and suitable for tyton rubber joints upto 150 mm dia bore complete all as specified and as directed. |
| 98 | S&F in replacement of rusted base frame of MS fabricated incl vibration pad, washers, nuts, bolt, studs, thimbles of Pump Sets of capacities from 10 HP to 20 HP, centrifugal or monoblock type, fixing properly on foundation joints with nuts and washers complete all as specified and as directed. |
| 99 | M&L PCC 1:2:4 type D-2, using 40 mm graded stone aggregate incl provision of necessary form work / brick work where required including necessary foundation joints andfinishing fairto the exposed surfaces, complete all as directed. |
| 100 | Fabricate, supply, install, connect, test and commission Star-delta LT feeder pillar box / panel board / indoor type, made out of MS sheet 3.15mm thick and angle iron frame of size 50x50x6 mm 3 phase, 4 wire, 440 Volts, AC, 50Hz with TPN suitable size aluminium bus bar of capacity300 Amps with PVC insulatedcolour code sleeves, mounted horizontallywith porcelain insulators complete with volt meter 0-500 volts, Ammeter with CTS & selector switches, back up fuse,indicating lamps with toggle switches duly wired with proper colour code, lugs, gland, thimbles including locking arrangement & suitable foundation / platform required for erection of LT Panel duly certified by CPRI, comprising of the following switch gears :- |
| 101 | IncomingMCB TPN 4 Pole 40-100 Amp 16 KA- 01LED phase indication lamp(RYB)- 01Digital voltmeter 0 to 500 Volt- 01Digital Ammeter 0 to 400 Amp with CTs and selector switch - 01OutgoingStar delta starter suitable for 20 HP monoblock pump including control MCB, suitable really and contactors- 03MCB TPN 4 Pole 40A 16 KA \"C\"- curve - 03 |
| 102 | Taking down carefully copper/Aluminium point wiring (light, fan. socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets , light fitting etc and removing materialsto store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. |
| 103 | M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLS cable 1100 Volts grade ISI-694 marked with valid CML No. single core multistranded cable in and including heavy duty concealed PVC conduitnot less than 20mm dia and accessories ISI marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and including 1.6 mm thick (recessed) for fixingof switches, sockets and fan regulators etc including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLS cable single core multistranded cable as earth continuity wire complete all as specified and as directed. for One light / fan / security light/5Amps Indp socket / Bell point controlled by one switchpoint controlled by one switch |
| 104 | All as per item no.102 hereinabove but for One 3 pin socket outlet 5 Amps on same boardcontrolled by one switch . |
| 105 | All as per item no.102 hereinabove but for One 3 pin socket outlet 5 Amps on independent board controlled by one switch |
| 106 | All as per item no.102 hereinabove but for with copper conductor cable FRLS 4.0 sqmm for one 3 pin socket outlet 15 Amps concealed and including provision of 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. |
| 107 | S&Fin repairs Modular Switch 5/6 Amps, 1module 1 Way complete all as specified and as directed. |
| 108 | S&Fin repairs Modular Switch 15/16 Amps, 1 Module 1 Way complete all as specified and as directed. |
| 109 | S&Fin repairs Modular Socket 5/6 Amps, 2 Module 2 /3 pin complete all as specified and as directed. |
| 110 | S&Fin repairs Modular Socket 15/16 Amps, 2 Module 2/3 pin complete all as specified and as directed. |
| 111 | S&Fin repairsModular Fan Regulator Step type, 2 Module 120W complete all as specified and as directed. |
| 112 | S&Fin repairs 3 Module Cover Plate with frame and Metal Flush Box complete all as specified and as directed. |
| 113 | S&Fin repairs8 Module Cover Plate with frame and Metal Flush complete all as specified and as directed. |
| 114 | S&Fin repairs Ceiling rose, 3 plate / PVC/ polycarbonate, isolated body complete all as specified and as directed |
| 115 | S&F 4 Feet LED Tube light of 20 Watt Batten with intergrated electronic driver having THD < 20% and aluminium housing with necessary fixingscrews, and connected upto ceiling rose including taking down existing Tube light fitting of any type and making Good complete all as specified and as directed. |
| 116 | S&F SPN DB Double door 8 way with tray for provision of MCBs, and Dolly for earth and neutral complete all as specified and as directed. |
| 117 | S&FMCB, SPN 32 Amps, C Curve, 10 kA, Complete all as specified and as directed. |
| 118 | S&FMCB, SP 6- 32 Amps, C Curve, 10 kA, Complete all as specified and as directed. |
| 119 | Supply and fixing ceiling fans complete with blades, down rods,and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEEFive star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 120 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers incl make in good to the disturbed surface MS bolts, grouted to wall and connecting up including provision in cable from connector to fan with flexible cable 24/ 0.2 mm with copper conductor and necessary fitting arrangementsincluding taking down existing fan complete all as specified and directed. |
| 121 | S&FLED Bldg. Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 122 | M&Lfor Earthing complete with earth galvanized steel plate electrode 600x600x6.3 mm buried directly in ground earth pit not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level, surrounded from all sides with mixture of charcoal and common salt and electrode connected withGIstrip 32x6 mmby means of bolts, check nut and washers of GI or steel, GI pipe light grade of 40mm bore as protection pipe, GI wire of length not more than 7.5 mtr and connected to test point. GI pipe 20mm dia medium grade for watering, funnel with wire mesh, PCC (1:3:6) pit and RCC (1:2:4) type B-1 for cover 50mm thickwith 8 mm dia bar reinforcement both ways @ 140 c/c including excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr as shown on electrical plate No 3 of SSR 2009 complete all as specified and as directed. |
| 123 | Supply & fix aluminium strip 25mm x 3mm complete with saddle and fixing screws for fitting the strip. |
| 124 | S&F sub main wiring with two runs of single core cable FRLS PVC insulated sheathed cable 1100 volts grade 6 Sqmm copper multistranded conductor including and drawing into concealed PVC conduit of suitable size ISI marked Medium grade, including 6 sqmm FRLS PVC insulated unsheathed multistranded for earth wire connected to earth complete all as specified and as directed. |
| 125 | S&F sub main wiring with two runs of single core cable FRLS PVC insulated sheathed cable 1100 volts grade 1.5 Sqmm copper multistranded conductor including and drawing into concealed PVC conduit of suitable size ISI marked Medium grade, including 1.5 sqmm FRLS PVC insulated unsheathed multistranded for earth wire connected to earth complete all as specified and as directed. Note for item No.123 & 124:- Two runs of 1.5 Sqmm /6sqmm size PVC cable , one run of 1.5 Sqmm/ 6sqmm size PVC cableas earth wire and one run of PVC conduit shall be measured as one unit length. |
