|
| 1 | Sch \"A\" |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 3 | M&L rendering 15mm thick on walls as well as on sunken floor in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. (Note : Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule). |
| 4 | M&L forcement concrete 1:5:10type E-2 (using 40 mm graded crushed stone aggregate)as in foundation filling and massconcrete complete all as specified and directed |
| 5 | M&L applying a coat of bitumen primer @ 0.30 lit per Sqm complete all as specified & directed. |
| 6 | M&L providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/Sqm) laid on primed surfaces by forced application APP based polymeric membrance including after applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm including cleaning surfaces complete all asspecified & directed. |
| 7 | Supply only Iiquid water proofing compound ISI marked as approved complete all as specified and directed |
| 8 | M&L for providing cement concrete 1:2:4,type B-1 using 20mm graded crushed stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 10 | M&L forNon - skidceramiccoloured tiles7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 11 | M&L forglazedceramiccoloured tiles in vertical surface300x450x7mm thick, set & jointed in neat cement slurry and pointed in whiteor coloured cement to match the colour of tiles over and including 10 mmthick rendering in cement mortar 1:4 complete all as specified and directed |
| 12 | Taking down steel water tubing of 15 mm dia bore including connection and S&F Mild steel GI tubing 15 mm bore medium weight fixed to walls and floor complete all as specified and directed |
| 13 | Taking down steel water tubing of 40 mm dia bore including connection and S&F Mild steel GI tubing 40 mm bore medium weight fixed to walls and floor complete all as specified and directed |
| 14 | S&F in repairs vitreous China wash basin, white or in matching colour of tiles , flat back, size 550x450 mm excluding taps but including 32 mm dia waste coupling chromium plated brass and PVC waste pipe 750 mm long( Minimum), chain and plug and porcelain stopper,brackets for fixingany size including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed |
| 15 | S&F in repairs Pillar taps, cast copper alloy 15 mm bore, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed |
| 16 | S&F in repairs Vitreous China squatting pan orissa pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe complete all as specified and directed |
| 17 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including connection to trap and to flushing pipe complete all as specified and directed |
| 18 | S&F seat cover for pedastal pattern complete all as specified and directed |
| 19 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 20 | S&F Urinal bowl type basin only including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and directed |
| 21 | S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and directed |
| 22 | S&F Urinal partitions slabs terminating about 40cm above floor line, fixed in repairs complete all as specified and directed |
| 23 | Supply and fix in repairs 10 ltrs capacityPVCsyphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets, fush pipe of polythylene of low or high density or PVC 32 mm dia complete all as specified and directed. |
| 24 | Supply and fix in repairs PVC connection 15 mm diawith PTMT nuts of length 450 mm complete all as specified and directed |
| 25 | Supply and fix in repairs Bib cock 15mm with flange, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated complete all as specified and directed |
| 26 | Supply and fix in repairs Angular/ stop cock 15mm with wall flange chromium plated fancy type complete all as specified and directed |
| 27 | Supply and fix in repairs Concealed stop cock, 15mm chrome plated fancy typelong shank and cup complete all as specified and directed |
| 28 | S&F chromium platedfancy type shower rose with arm 125 mm size including fixing to steel pipe or union complete all as specified and directed |
| 29 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed |
| 30 | S&F Grating doom 125mm dia of PTMT with waste hole (Minimum weight 40gms) complete all as specified and directed |
| 31 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 32 | S&F 1500 mm x 600 mm bevelled edge mirror 5 mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 33 | S&F in repairs waste coupling PTMT 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed |
| 34 | All as per item No 32 above but 40mm dia complete all as specified and directed |
| 35 | S&F in repairs 40 mm bore PVC waste pipe suitable for WHB or Sinks etc complete all as specified and directed |
| 36 | S&F in repairs tubular towel rail brass chromium plated 20mm dia complete all as specified and directed |
| 37 | S&F in repairs soap dish of chromium plated brass screw fixed to wall complete complete all as specified and directed |
| 38 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from site complete all as specified and directed. |
| 39 | Taking down shuttersof any desciption area exc 1.0 Sqm but n.exc 2.0 Sqm each and refixing in the same opening after easing, minor adjustment and minor repair complete all as specified and directed |
| 40 | S&F Solid PVC door/window frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixing in operating as per specifications given in SSR 2020 (Part-II) complete all as specified and directed. |
| 41 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rail.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail , lock railand bottom rail on either side and as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing to frame at site as per specification complete all as specified and directed. |
| 42 | S&Fmild steel, cold rolled, medium weightbutt hinges 100 mm, fixed with screws to wooden frames or fixed with welding to iron frames complete all as specified and directed. |
| 43 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed of size150 mm long complete all as specified and directed |
| 44 | S&F Aluminium handle Extruded aluminium alloy handles fabricated type anodised of size150 mm long complete all as specified and directed |
| 45 | Dismantling water tanks of capacity 250 to 500 ltr and removing to store and S&F rotational moulded polythylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) triple layer hoisted and fixed in position including nipple and float valve ball cocksuitable complete all as specified and directed |
| 46 | Dismantling of cast iron or reinforced concretesoil waste and drain pipe, 75/100 mm dia, jointed in cement mortar or lead and taking out of trenches, if required complete all as specified and directed |
| 47 | S&F PVC (SWR) 75 mm pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed |
| 48 | S&F PVC (SWR) 110 mm pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed |
| 49 | M&L 75mm dia PVC (SWR)floor trap, plain withgrating including jointing with solvent cement and fixed with cement concrete type B-1 (1:2:4) complete all as specified and directed |
| 50 | S&F PVC 75 mm (SWR) bends any radius complete all as specified and directed |
| 51 | S&F PVC 110mm \"P\" Trap complete all as specified and directed |
| 52 | Taking down cement plaster on brick wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed |
| 53 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfacesin CM 1:4 finished even and fair complete on external surfaces including applying two coats of cement base paintcompleteall as specified anddirected . |
| 54 | M&L rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement including M&L for preparation of new plastered surfacesof walls of any descriptionandapplyingtwo coats of distempering of wallwith distemper oil emulison (any tint)complete all as specifiedand directed. |
| 55 | Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, RCC chulha/chimany and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specfied and directed. |
| 56 | M&L for RCC (Nominal Mix) type B0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in roofs, beams, staircases, landing, chajjas, RCC chulha/chimany and similar suspended work complete all as specified and directed |
| 57 | M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 58 | Demolition ofbrickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed |
| 59 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed |
| 60 | M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) cills, cooking platforms, in steps, jambs, pillars, window-cilland like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed complete all as specified. |
| 61 | S&F Figured glass 3mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed |
| 62 | S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed |
| 63 | Taking down carefully point wiring of any type (ie on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixutres such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawal plug, screw etc includingremoving materials from siteand making good disturbed surface of walls, floors etc. complete all as specified and directed. |
| 64 | M &LPoint wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistrandedcopper conductor drawn through and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend end caps etc complete concealedin walls/ceiling/roof/etc including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor and making good to all disturbed surfaces and matching the same with adjoining specifications, all as specified and as directed for the following :- |
| 65 | One light/fan point controlled by one, one way switch. |
| 66 | All as per item No. 63 described here-in-before but with copper conductor cable FR LS 2.5 Sqmm for one 3/5 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. |
| 67 | S&F 20 watt LED tube lighting fixtureall as specified & directed. |
| 68 | S&F 10 watt LED tube lighting fixture complete all as specified and directed |
| 69 | S&F in repairs energy saving bulk head luminaries with opal diffuse LED 10 watt complete prewired products must be made in India only connection and testing complete all as specified and directed |
| 70 | Supply and fixfor SPN MCB DB 4 wayswith Volt, Double door type complete all as specified and directed. |
| 71 | S&F forMCB SPN 6- 32 Amps, C-series complete all as specified and directed. |
| 72 | S&F for SP MCB 6-32 Amps C-series complete all as specified and directed. |
| 73 | Supply and fix for exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V 50 HZ RPM 1200,copper winding of sweep 300mm complete all as specified and directed |
| 74 | Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and directed |
| 75 | Supply and Fix Switch Piano,Flush type single pole , one way 5 Amp complete all as specified and directed |
| 76 | Supply and Fix Switch Socket combenation 2 in 1outlet 5 pin, 6/16 A flush type complete all as specified and directed |
| 77 | M&L for making hole using core drill suitable for exhaust fan and making good to all disturbed surfaces and matching the same with adjoining specifications complete all as specified and directed |
| 78 | M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 6 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 6 Sqmm PVC insulated with green insulation complete all as specified and directed |
| 79 | M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified and directed. |
| 80 | Taking down Exhaust fan, celing cable end, dismantling blades from fan and keeping in safe custodyfor reuse at site andmaking good disturbed surfaces complete all as specified and directed |
| 81 | Refixingonly Exhaust fan and connecting up including of cable from celling rose complete all as specified and directed |
| 82 | Supply and fix sheet metal enclosure with socket plug top and SPN MCB 20Amp , 10kA, 50 Hz and enclosure with a two pin and earth plug and socketcomplete all as specified and directed |
| 83 | M&L Earthing including earth work complete with galvanised steel earth plate electrode60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner. |
| 84 | Maintenace and Servicing of Solar Water Heater including cleaning of panels,repair of solar tank leakage,repair and replacement of Thermostat and Element of capacity 3 KW & testing its serviceibility complete all as specified and directed |
