|
| 1 | DESK (FD-107 / 1021) |
| 2 | Material and labour in replacement for Box of Desk (Top,Bottom, Back, Sides) shall be 18/19mm thick Prelaminated particle board (exterior grade), (Shade and texture natural teak)and 4mm thick half round first class teak wood edging all around the top of Desk, complete, all as specified and shown indrawing and as directed . |
| 3 | Material and labour in replacement for leg of desk with 25mm dia MS tube of wall thickness 1.6mm including necessary cutting, welding etc, complete all as specified and shown indrawing and as directedby the Engineer-in Charge. |
| 4 | Material and labour in replacement for centre stiffener and long rail of desk with 25mm dia MS tube of wall thickness 1.60mm including necessary cutting, welding etc. complete, all as specified and shown indrawing and as directed . |
| 5 | Material and labour in replacement forshort stiffener and short rail of desk with 25mm dia MS tube of wall thickness 1.60mm including necessary cutting, welding etc. complete, all as specified and shown in drawing and as directed . |
| 6 | Material and labour in replacement for hard rubber shoe of Desk of black colour as per existing as approved complete all as specified and shown indrawing and as directedby the Engineer-in-Charge. |
| 7 | REPAIRS TO TRESTLE STORE ROOM WOODEN (FD - 86) |
| 8 | Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken / unserviceable long rail and supply and fixing of new well seasoned second class hard wood Shisham long rail of size 2440mm x100mm x100mmall as per drawing and as specified and directed by the Engineer-in-Charge |
| 9 | Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken / unserviceable leg and supply and fixing of new well seasoned second class hard wood Shisham leg of size 405mm x100mm x100mmall as per drawing and as specified and directed by the Engineer-in-Charge |
| 10 | Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken / unserviceable stiffener and supply and fixing of new well seasoned second class hard wood Shisham leg of size 1980mm x175mm x100mm all as per drawing and as specified and directed by the Engineer-in-Charge |
| 11 | BIN SOILED LINEN (FD - 70 M, FD-244, FD-212) |
| 12 | Material and labour in replacement for New top of Bin soiled made out of 18/19mm thick wooden plank of seasoned hard wood to the the existing teak wood frameall as per drawing and as directed by the Engineer-in-Charge. |
| 13 | Material and labour in replacement for New sides of bin soiled (front or back) on existing old wooden frame made to shape and size with 18/19mm thick wooden plank all of seasoned hard woodas per drawing as and directed by the Engineer-in-Charge . |
| 14 | Material and labour in replacement for New legs to bin soiled (front or back) made to shape and size with 18/19mm thick wooden pank of seasonedhard wood all as per drawing and directed by the Engineer-in-Charge. |
| 15 | Material and labour in replacement for mild steel butt hinges of size 75mm, Medium weight, cold rolled all as per drawing and as specified and directed by the Engineer in Charge. |
| 16 | SIDE BOARD (FD – 241 ) |
| 17 | Material and labour in replacement for top of side board with 18/19mm thick pre laminated particle boardone side hard woodincluding 6mm thick teak wood edging all-round , complete, all as specified and shown indrawing and as directed . |
| 18 | Material and labour in replacement for bottom of side board with 18/19mm thick particle board commercial typeincluding 6mm thick teak wood edging all-round , complete, all as specified and shown indrawing and as directed . |
| 19 | Material and labour in replacement for door shutter of side board with 18/19 mm thick one side hard wood pre-laminated particle board including CP knob, lock, hinges fixed to each shutter and 6 mm thick teak wood beading all around complete all as specified and shown in drawing and as directed. |
| 20 | Material and labour in replacement for drawer of side board includingCP knob fixed to each drawer complete all as specified and shown indrawing and as directed . |
| 21 | Material and labour in replacement for back side of side board with 9 mm thick commercial ply wood, complete, all as specified and shown indrawing and as directed . |
| 22 | Material and labour in replacement for shelf of side board with 18/19 mm thick particle board complete, all as specified and shown indrawing and as directed . |
| 23 | Material and labour in replacement for leg ofside board of required size made out of well seasoned 1st class Teak wood,complete all as specified and shown indrawing and as directed . |
| 24 | Table Bed Side ( FD-248 & FD/E6/MAP/15) |
| 25 | Material and labour in replacement for back side of table bed side with 6 mm thick plywood top , commercial type, BWR grade of required sizecomplete all as specified and shown in drawing and as directed. |
| 26 | Material and labour in replacement for shelf of table bed side with18/19mm thick one side teak faced pre laminated particle board, complete all as specified and shown in drawing and as directed. |
| 27 | Material and labour in replacement for top of of table bed side with18/19mm thick of prelaminated particle board including hard wood beeding complete all as specified and shown in drawing and as directed. |
| 28 | Material and labour in replacement for side ofof table bed side with18/19mm thick one side teak faced pre laminated particle board complete all as specified and shown in drawing and as directed. |
| 29 | CHAIR DINING WITH CUSHION (FD-375 &FD/E6/MAP-II/10) |
| 30 | Material and labour in replacement for seat of chair dining with cushion, Seat shall be 12 mm thick BWR grade phenol bonded plywood, commercial vennered both sides, fixed to rails with 12 Nos. steel screws of suitable size. The seat ply shall be covered with removeabl 75 mm thick 32 density foam cushion with approved upholstery fabric of best quality as approved by the GE of rate Rs.200/- per meter. All as per drawing and as specified and directed by the Engineer-in-Charge. |
| 31 | Material and labour for fixing of corner 8 Nos of size 75mmx75mmx25mm in each chair made out of well seasoned 1st class hard wood, allas per drawing and as specified and directed by the Engineer in Charge. |
| 32 | Material and labour in replacement for damaged front & rear leg, back rest,side rail, stiffner of chair dining with cushion with new leg of required size and shape, made out of well seasoned 1st class hard wood, allas per drawing and as specified and directed by the Engineer in Charge. |
| 33 | Chair wooden bottom(FD-225 & 285) |
| 34 | Taking out unserviceable ply wood seat from chair wooden bottom without arms and S&F new ply wood seat 6mm thick plywood commercial exterior grade BWR. All as shown in drg and as directed by Engr-in-charge. |
| 35 | Taking out unserviceable rear leg from chair wooden bottom w/o arms and Supply and fixing new rear leg made of seasoned hard wood matching with the existing shape & size. All as shown in drg and as directed by Engr-in-charge. |
| 36 | Taking out unserviceable front leg from chair wooden bottom w/o arms and Supply and fixing new front leg made of seasoned hard wood matching with the existing shape & size. All as shown in drg and as directed by Engr-in-charge. |
| 37 | Stool dressing CB and cushion (FD- 252) |
| 38 | Taking out unserviceable leg from stool dressingand providing new leg made of seasoned hard wood including rubber shoe at the bottom of leg matching with the existing shape & size. All as shown in drg and as directed by Engr-in-charge. |
| 39 | Taking out unserviceable front/back rail from stool dressing and providing new front /back rail made of seasoned hard wood matching with existing shape & size. All as shown in drg and as directed by Engr-in-charge. |
| 40 | Taking out unserviceable side rail from stool dressing and providingnew side rail made of seasoned hard wood matching with the existing shape & size. All as shown in drg and as directed by Engr-in-charge. |
| 41 | Taking out unserviceable foam cushion seat from old stool dressing cushion and providing new foam cushion seat shall be of 75mm thick cushion of 32 density of size 530mm x560mm duly covered with tapestry cloth , colour, quality and shadeas approved by GE/Engr-in-Charge. (Rate not less than280/- Rsper mtr) matching with existing shape and size all as shown in drg complete all as specified and as directed. |
| 42 | Sofa Set Single Seater(FD-281) |
| 43 | Taking out unserviceable foam cushion seat & back from sofa set to seat Single FD-281 and supply & fix new foam cushion seat & back of size 530x560x100mm thick 32 density, duly covered with tapestry clothcolour, quality and shadeas approved by GE/Engr-in-Charge. (Rate not less than280/- Rsper mtr) matching with existing shape and size all as shown in drg complete all as specified and as directed by the Engr-in-Charge. Note: Cushion and cloth will be supplied/dumped in advance before commencement of work alongwith purchase voucher. |
| 44 | Taking out unserviceable tapestry cloth from old sofa cushion of size 530x560x100mm and Supply and fixingnew tapestry clothcolour, quality and shadeas approved by GE/Engr-in-Charge on good quality cushion.(Rate not less than280/- Rs per mtr) matching with existing shape and size all as shown in drg complete all as specified and as directed by the Engr-in-Charge. |
| 45 | TABLE OFFICE CLERK & OFFICER WOODEN (DB-4118/DB-4119) |
| 46 | Taking out unserviceable Top from Table office Clerk/Officer wooden and S&F new top made of pre-laminated particle board 18 mm thick exterior grade BWR one side teak face ISI marked as per IS CodeNo-12823duly Covered with 4 mm thick teak wood beading all round the top, Matching with the shape and size, all as shown in drawing complete all as specified and as directed by the Engr-in-Charge. |
| 47 | Material and labour in replacement for leg of table of required size made of well seasoned hard wood, complete, all as specified and shown indrawing and as directed . |
| 48 | Material and labour in replacement for front rail of required size made of well seasoned hard wood, complete, all as specified and shown indrawing and as directed . |
| 49 | Material and labour in replacement for side rail of required size made of well seasoned hard wood, complete, all as specified and shown indrawing and as directed . |
| 50 | Material and labour in replacement for drawer with knob of required size made of well seasoned hard wood,complete, all as specified and shown indrawing and as directed . |
| 51 | Material and labour in replacement for stiffener of required size made of well seasoned hard wood,complete, all as specified and shown indrawing and as directed . |
| 52 | CHAIR EASY STEEL CUSHIONED (FD -121) |
| 53 | Material and labour in replacement forseat and back of chair easy steel of size 560mm x 635mm of 50mm thickness, 32 density foam cushion duly up holstered with leather based rexene fixed over and including 12mm thick commercial type, BWR grade, complete, all as specified and shown indrawing and as directed . |
| 54 | Material and labour in replacement forteak wood arm rest of size 65mm x19mmof required size made of well seasoned hard wood, complete, all as specified and shown indrawing and as directed . |
| 55 | Material and labour in replacement for MS bars / MS flat of required size duly welded & smoothed, complete, all as specified and shown indrawing and as directed . |
| 56 | Material and labour in replacement forback of chair easy steel of size 560mm x 355mm of 25mm thickness, 32 density foam cushion duly up holstered with leather based rexene fixed over and including 12mm thick commercial type, BWR grade, complete, all as specified and shown indrawing and as directed. |
| 57 | Material and labour for welding to broken places and smoothing it properly complete,complete, all as specified and shown indrawing and as directed . |
| 58 | Chair Easy cushioned (FD-358) |
| 59 | Taking out unserviceable seat frame fromchair easy cushioned and providing new seat frame made out of 6mm thick plywood commercial exterior grade BWRas per IS code No 303. over which to be fixed 75mm thick foam cushion 32 density alongwith upholster leatherised of approved shade and texture by GE . Rate not less than 250/- Rs per mtr.Matching with the existing shape & sizeAll as shown in drg and as directed by Engr-in-charge. |
| 60 | Material and labour in replacement unsv under mentioned partand providing same part as per existing shape and size as per drg Back rest, front and back Leg, side rail,front/back rail & Arms. All as shown in drg and as directed by Engr-in-charge. |
| 61 | Chair CB special with hand rest (FD- 120) |
| 62 | Taking out unserviceable seat & back from chair CB special and providing new seat & back made of hard wood duly canned with 2 to 2.5mm wide plastic cane gola type Premier/ Shah brand as per Godrej pattern. All as directed by Engr-in-Charge. |
| 63 | Taking out unserviceable flat iron from chair CB special and providing new flat iron of size 25x3mm. 500mm long matching with the existing shape & size all as directed by Engr-in-Charge. |
| 64 | Taking out unserviceable handle from chair CB special and providing new handle made of hard wood duly polished in required shade as per drg matching with the existing shape & size. All as directed by Engr-in-Charge. |
| 65 | Taking out unserviceable hand board from chair CB special and providing new hand board of best quality matching with the existing shape & size all as directed by Engr-in-Charge. |
| 66 | Chair Computer with Arms (Revolving Chair) (FD/E6/MAP/01 & TP) |
| 67 | Material and labour in repair /Replacement of coster wheel complete with base, complete all as specified and directed by Engineer-in-Charge. |
| 68 | Material and labour in repair repair /Replacement of hydrolic system complete all as specified and directed by Engineer-in-Charge. |
| 69 | Material and labour in repair repair /Replacement of Seat & Back complete all as specified and directed by Engineer-in-Charge. |
| 70 | Book case steel glazed(FD-1028) |
| 71 | Taking out unserviceable sliding door and replace with new sliding door of book case steel glazed as per drawing, complete all as specified and directed by Engineer-in-Charge. |
| 72 | Taking out unserviceable internal shelves and replace with new shelves of book case steel glazed as per drawing, complete all as specified and directed by Engineer-in-Charge. |
| 73 | Taking out unserviceable Door lock and replace with new door lock make: harrison as per drawing, complete all as specified and directed by Engineer-in-Charge. |
| 74 | Taking out existing broken and providing new door glass 3/5mm as per drawing, complete all as specified and directed by Engineer-in-Charge. |
| 75 | Almirah Mess Utensil(FD – 93M) |
| 76 | Taking out existing and providing new Top of Almirah Mess Utencil , complete all as specified and directed by Engineer-in-Charge. |
| 77 | Taking out existing and providing new Back Plywood complete all as specified and directed by Engineer-in-Charge. |
| 78 | Taking out existing and providing new Leg complete all as specified and directed by Engineer-in-Charge. |
| 79 | Taking out existing and providing new Internal shelf and front planks with hinges, handle and haps & staples, complete all as specified and directed by Engineer-in-Charge. |
| 80 | Notice/Display Board (All Type) (8\"x4\",6\"x4\", 4\"x2, 8\"x6\", 3\"x2\", 4\"x3\") (FD-99M, 117, 1042) |
| 81 | Taking out existing and providing newBroken Glass, back ply, front and sides rail all as per drg and direction. |
| 82 | Taking out existing and providing new green/blue cloth as per drawing, complete all as specified and directed by Engineer-in-Charge. |
| 83 | Rack Steel (All Type) (FD-97,106M,1023, 1038,1039) |
| 84 | Taking out existing and providing new Rack steel Shelf of Rack steel, complete all as specified and directed by Engineer-in-Charge. |
| 85 | Taking out existing and providing newSide Angle and cornercomplete all as specified and directed by Engineer-in-Charge. |
| 86 | Taking out existing and providing new Back seat,complete all as specified and directed by Engineer-in-Charge. |
| 87 | Tightening the complete frame with all shelfs with necessary welding, riviting and with nut & bolt as reqired. |
| 88 | Table Draftman Steel & Wooden (FD-1016) (FD-211) |
| 89 | Supply and fixing top made of 18mm thick plywood with 1mm sunmica on Table Draftman Top to be fixed on existing plank with 50mm beadding all round the top. All as shown in drg and as directed by Engr-in-Charge. (work to executed at unit location) |
| 90 | Tightening the loss parts of frame and wooden part with necessary welding, riviting as per drg and direction. |
| 91 | Hot Case Large/Small (FD-363,364) |
| 92 | Taking out existing broken and providing new Marble Top with new marble with same shape and size all as per drg. |
| 93 | Repair and Replace existing unsv and decayed parts of Hot case i.e unsv mesh, front side rail, door, back ply, legs and Alum sheet All as shown in drg and as directed by Engr-in-Charge. |
| 94 | Safe meat & Milk (FD- 47) |
| 95 | Taking out existing broken and providing new Marble Top, complete all as specified and directed by Engineer-in-Charge. |
| 96 | Repair and Replace existing unsv and decayed parts of Hot case i.e unsv mesh, front side rail, door, back ply, legs and Alum sheet All as shown in drg and as directed by Engr-in-Charge. |
| 97 | TV Trolley (FD/E6/MAP/4) |
| 98 | Replacement of front Glass with lock and handle and fix with hinges All as shown in drg and as directed by Engr-in-Charge. |
| 99 | Replacement of unserviceable trolly wheel All as shown in drg and as directed by Engr-in-Charge. |
| 100 | Replacement of top,side, front/back unsv part All as shown in drg and as directed by Engr-in-Charge. |
| 101 | Replacement of unserviceable sliding channel of Drawer and fix all per drg and as directed by Engr-in-Charge. |
| 102 | Locker bed side steel (FD-257 & 1029) |
| 103 | Taking out unserviceable hasp & staple, handle, unsv leg from Locker bed side steel and supply and fixing new hasp and staple, handle, leg (in pair) of approved quality. Matching with the existing shape and size and as per drg completeall as specified and as directed by Engr-in-Charge. (Note :- Work to executed at unit location as direction by Engr in charge). |
| 104 | Chair writing MAP Steel (FD/E6/MAP/12) & Chair Confrance (TP) |
| 105 | Taking out unserviceable tapestry cloth from seat & back of chair writing cushioned and providing new tapestry cloth of approved quality & shades as approved by GE including replacement of foam cushion and plywood etc. matching with the extising shape and sizecomplete all as specified and as directed by Engr-in-Charge |
| 106 | Taking out unserviceable hand rest from chair writing cushioned and providing new hand rest made of integral skin polyurethane with 75-85 shore \"A\"hardness and reinforced with MS insert. Matching with the existing shape and size. All as shown in drg complete all as specified and as directed by Engr-in-Charge |
| 107 | Chair dinning CB & Chair Writing |
| 108 | Material and labour in replacement of u/m old, unsv,damage & decayed part of Chair Dinning & Chair writing andS&F new part made out of well seasoned 1st class teak wood of same shape & size as per Drg complete incl polishing chair dinning all as specified and as directed by the Engr-in-Charge. (a) Rear & Front Leg |
| 109 | (b) Arms and back support |
| 110 | (c)Front/back & side rail |
| 111 | (d) Centre & side stiffner |
| 112 | Chair CB steel Padded with Arm & Coushion (FD & TP) |
| 113 | Taking out unserviceable seat & back from chairand providing new seat & back. Seat & back made of 75mm thick coushion having 32 density all covered with Rexine All as per drg and directed by Engr-in-Charge. |
| 114 | Taking out unserviceable handle from chair l and providing new handle as per drg matching with the existing shape & size. All as directed by Engr-in-Charge. |
| 115 | Charpoy GI pipeNewar & Ply top |
| 116 | Taking out unserviceable long rail from charpoy GI pipe and providing new long rail 32mm bore medium grade ISI marked with 32mm 3 way elbow.Threading at both end of long rail (1\"\" and 2\"\" on each end)), complete all as specified and directed by Engineer-in-Charge. |
| 117 | Taking out unserviceable long rail and cutting unsv long rail in 4 Nos Legs of Charpoy with threading (1inch) one side of leg and welding two clamps for fixing FMN set. MS plate 3mm thick in round shape should be welded at the bottom of all legs matching with the existing shape & size and as directed by Engr-in-charge. |
| 118 | Rack store storage 6\"x6\"x2\"/ Rack Laundary |
| 119 | Material and labour in replacement of u/m old, unsv,damage & decayed part of Rack store supply and fixing new part made out of well seasoned 1st class teak wood of same shape & size as per Drg complete all as specified and as directed by the Engr-in-Charge. (a) Wooden Planks of shelf, top and bottom |
| 120 | (b) Tightening the frame with L shape flate iron size-6\"\"x6\"\"x 5mm with screw |
| 121 | (c) Front/back & side rails of size-6\"x 4\"\"x4\"\" |
| 122 | Chair Barber with Adj Neck |
| 123 | Material and labour in replacement of u/m old, unsv,damage & decayed part :-(a) Seat and Back with Rexine cover |
| 124 | (b) Revolving mechanism with SS base fix with suitable nut & bolt |
| 125 | (c) Replacement of unsv Arms as per existing pattern |
| 126 | Teapoy verandah / Teapoy verandah MAP (FD-383,255) , FD/E6/MAP/17 |
| 127 | Taking out unserviceable top from teapoy verandah and providing new Top made of 12mm plywood thick exterior grade BWRas per IS code 303with sunmica (01mm thick) duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in drg complete all as specified and as directed by the Engr-in-Charge. |
| 128 | Bath Mat/Stool PVC |
| 129 | Replacement of Old, unsv bath mate/stool of differnt color with the Newof Trasparant white colour of same shape and size all as per direction by Engineer-in-Charge. |
| 130 | Welding |
| 131 | Running welding to any steel furniture items with Gas/Electric as required. Running welding upto 12mm shall be considered one point, complete all as specified and as directed by Engr-in-charge. |
| 132 | Material and labour for preparation of old/new, wooden/steel surfaces of any descriptionby scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish/painting of approved quality with high gloss finish completeall as specified and as directed by Engineer-in-Charge forthe following furniture articles:- |
| 133 | Desk (FD-107 / 1021) |
| 134 | Repairs to Trestle store room wooden (FD - 86) |
| 135 | Bin soiled linen (FD - 70 M, FD-244, FD-212) |
| 136 | Side Board (FD – 241) |
| 137 | Table Bed Side ( FD-248 & FD/E6/MAP/15) |
| 138 | Chair dining with Cushion (FD-375 &FD/E6/MAP-II/10) |
| 139 | Chair wooden bottom(FD-225 & 285) |
| 140 | Stool dressing CB and cushion (FD- 252) |
| 141 | Sofa Set Single Seater(FD-281) |
| 142 | Table Office clerk & Officer wooden (DB-4118/DB-4119) |
| 143 | Chair Easy steel Cushioned (FD -121) |
| 144 | Chair Easy cushioned ( FD-358) |
| 145 | Chair CB special with hand rest (FD- 120) |
| 146 | Chair Computer with Arms (Revolving Chair) (FD/E6/MAP/01 & TP) |
| 147 | Book case steel glazed(FD-1028) |
| 148 | Almirah Mess Utensil(FD-93M) |
| 149 | Notice/Display Board (All Type) (2440x1220mm, 1200x800mm, 2400x1800mm, 900x600mm, 4\"x3\") (FD-99M, 117, 1042) |
| 150 | Rack Steel (All Type) (FD-97,106M,1023, 1038,1039) |
| 151 | Table Draftman Steel & Wooden (FD-1016) (FD-211) |
| 152 | Hot Case Large/Small (FD-363,364) |
| 153 | Safe meat & Milk (FD-47) |
| 154 | TV Trolley (FD/E6/MAP/4) |
| 155 | Locker bed side steel (FD-257 & 1029) |
| 156 | Chair writing Steel /Chair confrance |
| 157 | Chair dinning& Chair Writing |
| 158 | Stool Steel 760mm/610mm/510mm |
| 159 | Required Painting of Ladder Loft |
| 160 | Tabe Cook House Marble Top (FD-237, 297, 1019) |
| 161 | Chair CB steel Padded with Arm & Coushion |
| 162 | Painting of Trastle store room steel |
| 163 | Painting of Rack 6\"x6\"x2\" (Gray paint) |
| 164 | Teapoy verandah / Teapoy verandah MAP (FD-383,255) , FD/E6/MAP/17 |
| 165 | NOTE:- Amount of credit ofRs. 11,250.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
