|
| 1 | Material and Labour for Brick work with sub class \"B\" brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed. |
| 2 | Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land, complete all as specified and directed. |
| 3 | Material and labour for 15 mm thick ready mix plaster in single layer with liquid water proofing compound on fair faces or other than fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, complete all as specified and directed by Engr-in-Charge. |
| 4 | Material and Labour for preparing newly plastered surfaces of walls / ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat and top coatover a coat of alkali resistent primer through authorized applicator onlyincluding use of scaffoldings, complete all as specified and directed. |
| 5 | Material and Labour for complete removal of existing treatment of old plastered surfaces of walls / ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat and top coatover a coat of alkali resistent primer through authorized applicator only including use of scaffoldings, complete all as specified and directed. |
| 6 | Material and Labour for glazed ceramic exterior wall tiles 6 to 8 mm thick not exceeding 0.36 sqm etc set & jointed in cement and pointed in coloured cement to match the shade of tile over andincluding 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed. |
| 7 | Supply & Fixed Aluminium composite panel sheet 3 mm thick PVCF (Glossy finished, Colour as selected by GE) fixed with necessary aluminium tube of size 25mm x 38mm x 1.50mm thick (Size of aluminium tube may varey depending upon the site condition, to consider the variation of column jambs double tubes of aluminium frame may required and no extra payment will be given for the same) with incl required silicon & screw as in ceiling,coloumns,wall,cillin vertical, horizontal surface complete all as specified and directed. |
| 8 | Material and Labour for Granite stone best quality (of any type) 18 to 20 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed or rendering in cement mortar 1:4 in vertical/horizontal surface, complete all as specified and directed. |
| 9 | Providing edge moulding to 18-20mm thick Granite stone (any description) of counters vanitiesetc. including machinepolishing to edge to give high gloss finish etc., complete all as specified and directed. |
| 10 | M & L for Providing, cement concrete 1:2:4 type B-0, in lintels upto 1.50m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 11 | S & F for Providing precast cement concrete Type B-0 1:2:4(12.50 mm agg) set in CM 1:4louvres and jallies, 25mm thick (measured solid), including all mouldings and frame, complete all as specified and directed. |
| 12 | S&F for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75 mm bore, complete all as specified and directed. |
| 13 | S&F for PVC (SWR) bends any radius, 75 mm bore, complete all as specified and directed. |
