|
| 1 | Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc. |
| 2 | M&L rendering 15mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement |
| 3 | M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement |
| 4 | M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement all as specified |
| 5 | M&L for two coats of exterior weather coat anti dust paintincl preparation of newsurface of wall complete all as specified and as directed. |
| 6 | M&L for two coats of exterior weather coat anti dust paintincl preparation of old decorated surface of wall complete all as specified and as directed. |
| 7 | M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed. |
| 8 | M& L for two coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed. |
| 9 | M&L three coat of acrylic distemper on ceilling including preparation of new plastered surface and complete all as specified |
| 10 | M&L preparing Old plastered or unplastered surfaces of ceiling and applying two coat of acrylic distemper on old decorated surface of ceiling complete all as specfied and direcetd. |
| 11 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed. |
| 12 | S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing. |
| 13 | S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC \"C\" channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing. |
| 14 | S & F of 200 mm long stainless steel grade 304 barrelbarrel tower bolts and fixed as specified and as directed. |
| 15 | S&F 100 mm long butt hinges, 3.00 mm thick (minimum) stainless steel grade 304 with SS hinge pinand fixedcomplete all as specified and directed. |
| 16 | S&F 150 mmstainless steel grade 304 handles 3.00 mm thick (minimum) complete all as specified and as directed. |
| 17 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames)exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed. |
| 18 | S & F Mild steel work as in frame of door and similar work of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheetingor other covering , running rails and guisides ) and hanging also fastening and fixing complete all as specified Frade Fe 410 (Gde E-320) |
| 19 | S& F pressed steel frames 105x60x1.25 mm for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate,etc, complete all as specified supplied and fixed |
| 20 | S& F pressed steel frames 125x60x1.25 mm for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate,etc, complete all as specified supplied and fixed |
| 21 | S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 0.90 mm thick decorative laminates on front side and 0.60 mm thick plain laminates on other side complete. |
| 22 | S&F 300mm long stainless steel grade 304 sliding door bolts, bolt or clip type,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifieed and directed. |
| 23 | S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass , gauze etc (without sash bars) , edges of framing plain , chamfered or rounded , fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) , supplied and fitted to chowkats. |
| 24 | Dismantling boarding any size and description fixed in any position withnails |
| 25 | S&F 20mm thick PVC boarding with nails as in cub board shelves in any situation planed one side with butt joints completeall as specified and as direcetd. |
| 26 | S&F for built in steel cup board with pressed steel frame of size 75 mm x 45 mm x 1.25mm thick with preseed steel shutter 1 mm thick Godreg pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement painting with two coats of synthetic enamel paint over one coat of ref oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame and shutter and making god disturbed portion in cm 1:3 or pcc 1:2:4 complete all as specified. |
| 27 | M & L preparing wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coat of synthetic enamelpaint over a coat of pink primer complete all as specified and directed. |
| 28 | Taking down steel/wooden window/ventilator of any size and description complete. |
| 29 | S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note: S&F rates, include for anodised aluminium hard ware as indicated, pvc roller, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames. |
| 30 | M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and ssimilar work conforming to Fe410 |
| 31 | S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 32 | S& Fgalvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed . |
| 33 | M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete. |
| 34 | Demolition of cement concrete (un reinforced) of any descriptionand in any position not other specifically provided for |
| 35 | M&L for cement concrete (1:5:10) type E-2 as infoundation filling and mass concrete |
| 36 | M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ .30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3 kg/sqm 2 mm thick consisting 100 mmmicron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where requiredover 10 mm thick rendering in CM 1:4 includingintegral waterproofing compound 3% and taking down existing plasteringas per manufacturer instruction and complete all as specified and directed |
| 37 | Removing existing water proofing treatment and preparing surfaces to the entire satisfaction of Engineer-in-Charge / GE including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed by Engineer-in-Charge |
| 38 | M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqmsupplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction and rendering 15mm thick on roof surfaces in CM 1:4 complete all as specified and direcet |
| 39 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises |
| 40 | M & L Glazed ceramic coloured tilesin vertical surface 350 mm x 250 mm x 7mm/450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white cementor colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed. |
| 41 | M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to matchcoloured tiles including 15 mm thick cement screed bed in CM 1:6complete all as specified and as directed. |
| 42 | M&L for polished glazed vitrified tiles double charged light shade coloured ceramic tiles 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 43 | M&L for polished glazed vitrified tiles double charged light shade coloured ceramic tiles 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sqm in skirting/dado etcset and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 44 | S&Fin repair vitreous china squatting pan \"Orissa\" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipeall as specified and directed |
| 45 | S & F in Repair 10 ltrs capasityPVC valveless syphonic action typeflushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high densityor PVC 32 mm dia for low level cistern complete all as specified and as directed. |
| 46 | Taking down old 110/75mm borePVC(SWR) pipes in any position |
| 47 | S&F75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement |
| 48 | S&F 75 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints laid in trenches or in floorsall as specified |
| 49 | S&F 75 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints fixed to wall all as specified |
| 50 | S&F 75 mm bore. PVC (SWR) bends |
| 51 | S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door |
| 52 | S&F 110 mm dia PVC (SWR) vent cowl. |
| 53 | S&F 110 mm PVC (SWR) bend any radius |
| 54 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall |
| 55 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all specified and directed |
| 56 | Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed |
| 57 | All as per item No 56 above herein before but 20 mm dia |
| 58 | S&F,16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 59 | S&F 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 60 | S&F reducing Tee/Elbow/Socket 20 x 16 mm dia with Female Brass Threaded Adaptor (FTA/FBTA) all as specified and directed. |
| 61 | Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceilingand wall all as specified and dircted |
| 62 | S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms). |
| 63 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs , washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm. |
| 64 | S&F (in repairs) Bib taps cast copper alloychromium plated handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.. |
| 65 | S&F (in repairs) angle cock cast copper alloy chromium plated handle screw down ,screwed both end for iron pipe or or brass ferrulefor 15 mm bpre of pipe complete all as specified and as directed. |
| 66 | S&F (in repairs) Stop cock (Concealed)cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cupfor 15 mm bpre of pipe complete all as specified and as directed. |
| 67 | S&Fin repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified |
| 68 | Dismantling ofexisting water tanks capacityexc 500 ltr n exc 1000Ltsand removing to store |
| 69 | S&F rotational moulded polethylene water tank of 500 ltrs capacity triple layered (cylindrical vertical with closed top) hoistedand fixed in position all as pacific SSR Part- I |
| 70 | S&F20 mm bore CPVC ball valve or gate valves, with CPVC/PTMT wheel head all as specified and directed. |
| 71 | S&F20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe |
| 72 | S&F in repairvitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified |
| 73 | S&Fin repairs 15mm bore pillar tap cast copper allloy with capstan headChromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed. |
| 74 | S&F in repairs floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floor , overall length of cover plate 150mm. |
| 75 | Supply only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed. |
| 76 | S&F in repair PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified. |
| 77 | S & F in repairs 300mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete. |
| 78 | S&F in repair CP towel rail20mm dia, 600 mm long between flanges |
| 79 | Demolition of stone slab and tiles of any description or thickness in floor, aprons etc. |
| 80 | M&L for machine cut mirror polish kota stone slab flooring20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing complete |
| 81 | M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including 15mm thick rendering in CM 1:4including rubbing and polishing complete |
| 82 | M&L for granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types over 20mm thick screed bed in CM 1:6 complete.. |
| 83 | M&L for 18-20 mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick rendering in CM 1:4. |
| 84 | Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided for complete. |
| 85 | M&L for RCC type B0 1:2:4(12.5 mm graded aggregate) in slabs supported on walls,beams and columns in floors,roofs,landings,balconies,canopies,deck slabs and in shelves complete all as specified and directed |
| 86 | M&L for 10mm dia and over mild steel TMT bars, cut to length , bent to shape required including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips , quality of steel conforming to demormed or twisted bars Fe-410-W (Gde E-250). |
| 87 | Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles |
| 88 | S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified. |
| 89 | Demolition of cement concrete (un reinforced) in ground floor for pavings n.exc 15cm thickness (below are above ground level) |
| 90 | M&L 50 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed. |
| 91 | S&Ffancy type curtain rails 25mm dia harisson rails, mild steel, chormium plated with fixing bracket, stops,rollers etc for hangging curtain rod complete all as specified and directed. |
| 92 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil. |
| 93 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil |
| 94 | Excavating over areas, exc 1.5 m but n.exc 3.0 mtr depth and getting out in soft/loose soil. |
| 95 | Returning filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm in soft/loose soil. |
| 96 | Removing excavated material n.exc 50 m and depositing where directed at a level n exc. 1.5m above the starting point. |
| 97 | Boring/ Drilling bore well of 300 mm diain any type of soil for casing strainer pipe by suitable method prescribed in IS 2800(Part I), inculding collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools , plants & machineries required for the job complete as per direction of engineer-in- charge, upto 2 m depth below ground level complete. |
| 98 | Boring/ Drilling bore well of 300 mm dia in any type of soil for casing strainer pipe by sutable method prescribed in IS 2800(Part I), Inculding collecting samples from different strata, preparing and submitting strata chart/bore log, Including hire & running charges of all equipments, tools , plants & machineries required for the job, all complete as per direction of engineer-in- charge , more than 2 mtr and upto 90 metre depth below ground level complete. |
| 99 | S & F of assembling, lowering and fixing in vertical postion in bore well, UPVC medium well casing (CM) pipe of required dia, conformaning to IS 12818, incl required hire and labour charges, fitting & accessories etc.all complete for all depths as per direction of Engr-in-charge 150 mm nominal size dia. |
| 100 | M & L for cement concrete type D2 1: 4 : 8 ( 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 101 | M&L for providing cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in copings etc. |
| 102 | M&L brick work with fly ash bricks (old size) straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 103 | M&L RCC M - 25 (Design Mix) (20mm graded agg) as in footing etc complete. |
| 104 | M&L RCC M - 25 (Design Mix)(20mm graded agg) as in walls, retaining walls, basement walls, and the like , of any thickness including attached pilaster and butresses, footing etc complete. |
| 105 | Use & wate formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work |
| 106 | Use & waste formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter |
| 107 | M & L for Mild SteelTMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9 mm dia or securing with clips complete. |
| 108 | M & L for Mild SteelTMT bar 6 to 8mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9 mm dia or securing with clips complete. |
| 109 | Extra for forming fair finished drain or channel 40 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed. |
| 110 | M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface using water proofing compound @ 3% by weight of cement content or as per manufacturer\"s instruction. (Note- integral WPC shall be measured and paid separately complete all as specified and as directed. |
| 111 | Supply liquid integral water proofing compound complete. |
| 112 | Gravel packing in tube well construction in accordance with IS 4097, including providing graval fine/medium coarse, in required grading & sizes as per actual requirement complete as per direction of Engr-in-Charge |
| 113 | Providing and fixing Bail plug/Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (Part-I) 150 mm dia |
| 114 | S & F of orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS:10910, on 12mm dia steel bar conforming to IS: 1786, having minimum cross section as 23mm X 25mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2mm tread on top surface by ribbing or chequiring besides necessary and adequate anchoring projection on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance identification mark to be visible even after fixing, incl fixing manhole with 30X20X15cm PCC Type C-1 1:3:6 (using 20mm graded stone aggregrate) complete as per design |
| 115 | S & F for suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement,all complete for borewell of 150mm dia |
| 116 | M & L for 100mm thick factory made precast RCC rectangular manhole covers of various sizes and approved quality HD 20 grade, including reinforcement of 8mm dia TMT bars of Fe 550 grade @ 100mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. |
| 117 | M & L for non woven Geotextile having thickness of 400 GSM, Having minimum tear Strength of 250 ASTM 4533,width wise atleast215 ASTM D4533 having puncture strength of 1550 plus as per ASTM D6241 Having elongation at Brack % of 57 plus as per ASTM D 4595 in Two layers, made out of long fibers to hold the modules and protect liner including cutting ,sizing ,head welding, and needle punched for high porosity and proper percolation complete as per entire satisfaction of Engineer-in-charge |
| 118 | M & L for CGWB/GRIHA approved Pure Rain Filter 700mm dia with 300mm dia inlet and outlet to accumulate storm water having desilting suspended solid catcher made out of FRP with strainers steel 304 grade strainers, having steel bucket of 600 micron capable of eliminating finer particulate matter upto160 micron filtration made of SS net with long fiber foam of 25mm thickness, Blue color, filtration capacity 40-80 kiloliters complete in accordance to the design, drawing and specification complete as per entire satisfaction of Engineer-in-Charge. Total depth of filter shall be 2000mm incl two filter extension complete. |
| 119 | M & L for Co-polymer based rainwater harvesting structure including supply of cross wave of size 494 mm x 494 mm x220mm with minimum void ratio of 94.7% having a weight of 1.8 and spacers having size of 988 mm x 240 mm x 25 mm having a weight of 0.8 kg of approved make and arranging the same in as directed by the engineer -in-charge and in complete accordance to the design, drawings as per direction of Engr -in-charge. The rates are inclusive of all necessary transportation, loading, unloading excise & taxes etc. |
| 120 | S & F of UPVC pipe 300 mm dia SCH 40 confirming to IS:4985 incl jointing with sealing ring confirming IS:5382 leaving 10mm gap for thermal expansion complete. |
| 121 | Supplying, filling, spreading & levelling stone aggragate 20mm nominal size, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge |
| 122 | Material & Labour for Extra for add or deduct for providing & fixing FRP (fiber reinforced polymer) based micro filter drum/ extension of 700 mm dia CGWB/GRIHA approved pure rain filters dia Accordance to the design, drawing and specification complete as per entire satisfaction of Engineer-in-Charge |
| 123 | Supply and installation of FRP based acess chambers, each having of size 500mm x 500mm x 500 mm to have access in the tank complete in accordance to the design drawings and specifications. |
| 124 | Taking down carefully of point wiring (Light , fan, socket or power)complete (fittings such as switches, Ceiling roses, pendants, regulator, sockets etc to be measured separately) removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed |
| 125 | Taking down carefully old unserviceable fittings & Fixers of any type and any size. |
| 126 | Taking down carefully old unserviceableby unscrewing from DB box, MCB SP/SPN/TPN of any size & any capacity . |
| 127 | Taking down carefully old unserviceable sub main wiring of any size. |
| 128 | Concealed point wiring using approved colour coding as per IS ,with stranded copper conductor 1.5 sq mm(nominal area),single core,FRLSH,PVC insulated and unsheated cable 1100 volts grade,ISI 694, marked in and including heavy duty PVC concealed conduit medium grade ISI marked 20 mm dia with all fittings PVC junction boxes, etc. modular GI metal sunken/flush boxes of thickness not less than 1.2 mm of any modules from 2 to 18 modules with inner and outer modular cover plates, including FRLSH, rigid PVC insulated unsheated stranded copper conductor 1.5 sq mm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified, for the following Note:(i)Cutting/chasing of wall etc. deemed to be included in quoted rate of this item.(ii) Modular GI metl flush/sunken box along with modular base/front cover plate are inclusive in the item rate quoted(iii)Only switches sockets and fan regulators shall be measured and paid separately |
| 129 | All as per Item No 128 One light point controlled by one switch |
| 130 | All as per Item No 128One fan point controlled by one switch |
| 131 | All as per Item No 128One exhaust fan point controlled by one switch |
| 132 | All as per Item No 128One 3-pin socket outlet 5 Amp on independent board. |
| 133 | All as per Item No 128 One 3 pin socket outlet 5 Amp on same board |
| 134 | All as per Item No 128One light point controlled by two way switches |
| 135 | All as per Item No 128 One bell point controlled by one switch |
| 136 | All per Srl item No. 128here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified for One 3 pin socket outlet 15 Amp on independent board. |
| 137 | Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 6sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit. |
| 138 | Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as an earth continuity conductor complete all as specified.Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit. |
| 139 | S &F Modular switchpolycarbonate SP one way 6 Amps complete all as specified and directed |
| 140 | Supply and fix in replacement two way modular switch 6 amps, 230 volts,complete all as specified . |
| 141 | S &F modular switch polycarbonate SP one way 16 Amps complete all as specified . |
| 142 | S&F modular bell push6 amp single pole one way complete. |
| 143 | S&F modular socket out let 3 pin 6 amp multipurposeflash type. |
| 144 | S&F modular socket out let 5 pin 6/16 Amp multipurpose, flush type 240 volt complete. |
| 145 | S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete. |
| 146 | S&F bell ding dong type AC 230 volt single pole Complete. |
| 147 | S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks all as specified. |
| 148 | Supply and fixing LED bulb 9 watt include rechargable connection all as specified. Make:C &S |
| 149 | M & L for replacement of Step regulator electronic modular fan regulator flush socket type on the existing phenolic laminated sheet etc as required complete & all as specified. |
| 150 | Taking down Exhaust fan of any size and deposited to E/M storeyard for refixing, complete all as specified |
| 151 | S&Fin replacement of old exhaustcupper binding 300mm with capacitor complete and fixing all as specified with Engr-in-charge. |
| 152 | Taking down fan of any size, sealing cable end, dismantling blades and removing fan and blades to store. |
| 153 | Supply & fix 1200mm Glaze BLDC ceiling fan (white) complete with remote control and electronic type regulator and accessories 230 V,1200 mm sweep. 5 star rated all as per specified and as directed by Engr -In-Charge |
| 154 | Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm all as specified and directed. |
| 155 | Supply and fixing 240V, 10 KA \"B\" curve miniaturecircuit breaker (MCB) of single poles and currentcarryingcapacity5to32AMP,intheMCBDB Completewithconnectiontestingand commissioning complete all as specified and as directed by Engr-In-Charge. |
| 156 | Supply and fixing 240V, 10 KA \"B\" curve miniaturecircuit breaker (MCB) of single poles and currentcarryingcapacitySPN 40 AMP,intheMCBDB Completewithconnectiontestingand commissioning complete all as specified and as directed by Engr-In-Charge. |
| 157 | Supply and fix in replacementMCB DB Single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar withIP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted . |
| 158 | S&F box type LED light fitting suitable for 4 ft20 watt complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed. |
| 159 | Taking down old unsv bldg security light fitting, Supply and fixingnew LED bldg security light fitting 45 watts with senser to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified. |
| 160 | Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanizediron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregatein lieu of CI cover and frame etc allas specified and shown in electrical plate No. 5 of SSR-2009 (Part-I including testing after completion. |
| 161 | Supply and fix decorative light fitting 1x9watt ceiling/wall mounted LED BULKHEAD luminaire with engineering plastic housingand top frame with opal PMMA diffuser. |
| 162 | S & F in replacement mirror LED light fitting 2 feet 10 watt with accessories complete all as specified and directed. |
| 163 | S & F PVC conduit with accessories 25 mm dia for drawing telephone/TV/internet wires complete all as specified and directed. Note :- ( only PVC conduit with accessories shall be measured and paid). |
| 164 | S & F for TV socketand including sunk cast iron 1.6 mm thick pressed steel terminal box andmounting of hylem sheet its necessary fittings and accessories all as specified. |
| 165 | Taking down existing energy meter by disconnecting clectric connection of any type ,any make ,any capacity in poly carbinate or sheet steel body, ISI marked ,50 Hz 240 volts AC single phase rating etc. all as specified. |
| 166 | Refixingexisting energy meter by disconnecting clectric connection of any type ,any make ,any capacity in poly carbinate sheet steel body with door ISI marked ,50 Hz 240 volts AC single phase/Three phase rating etc. all as specified. |
| 167 | S&F Sheet metal enclosure TPNdistribution board vertical type double door with insulated bus bar arrangement IP 43 protection4 way 415V complete all as specified . |
| 168 | Taking down of TPN DB all as specified. |
| 169 | S&F MCCB 100 Amps 4 pole25 KA all as specified |
| 170 | Taking down faulty damaged unserviceable LT under ground cable of any size. |
| 171 | Supply and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 25 sqmm 4 core complete all as specified . |
| 172 | Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying underground LT XLPEcable and getting soft/loose soil complete. |
| 173 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as directed and specified. |
| 174 | M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed and specified by Engr-in-Charge. |
| 175 | M& L for sand filling under floors or in foundations including watering and consolidation all as specified and directed. |
| 176 | Supplying andlayingun-reinforced precastconcretecablecover, butClass LV, Type I,flat,size 250mm x 150mm x 40mm all as directed and specified by Engr-in-Charge. |
| 177 | Supply and laying including taking out from trenches and poles XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 16 sqmm 4 core complete all as specified and as directed by Engr-In-Charge |
| 178 | Supply, fix testing and commissioning Out door type feeder piller box Bus bar made out of MS CRCA sheet 2mm thick of size 0.60 Mtrx0.60mtrx0.30 mtr consisting of cupper Bus Bar of rating 200 Amps working 4 wire system 415 volt mounted on various insulator with cable earth alleys including steel flexible pipe as per required length at site with new aluminium lugs of suitable size including making connection properly of existing cables of any size/type for existing new incoming and outgoing cables complete all as specified and as directed by Engr-In-Charge. Note :Bus Bar mounting stand made out of angle iron of size 50mm x50mm x 6mm, 600 mm high and size suitable to mount the panel includingfoundation of PCC (1:3:6) type C-1 using 20mm graded stone aggregate with and including excavation and earth work in any type of soil complete.(a) INCOMING :- (i) Supply and fix 4 Pole MCCB ,63 Amp50 Hz 415 V, With Thermal based Release type Capacity 25 KA complete all as specified and directed =01 Nos(b) OUTGOING :- (i) Supply and fix TPN MCB ,40 Amp50 Hz 415 V, With Thermal based Release type Capacity 25 KA complete all as specified and directed =02 Nos(c) Supply and fixR Y B Phase LED based indicator lamp sets comprising of three colours complete all as specified and directed =01 set(d).Ammeter 0 - 400 Amps, Digital display, flush mounted 3 phase 4 wire with slector switch including CTs of required capacity =01 Set(e)Voltmeter 0 - 600 Volts, Digital display, flush mounted3 phase 4 wire with slector switch - 01 set.(f) complete Internal wiring of suitable size of copper wire.(g) Supply and fix time switches 415 V three Phase of 20 Amp rating with contactor fitted inside steel enclosure. |
| 179 | Supply and lay Tubes, \"medium grade,25 mm galvanised,with all fittings ISI Marked laid in trenches all as specified and directed. |
| 180 | Supply and lay GI pipe galvanized, “Medium class”, including all fittings ISI Marked 40 mmdia. |
| 181 | Supply and lay GI pipe galvanized, “Medium class”, including all fittings ISI Marked 50 mmdia. |
| 182 | Supply and fix Gun-metal, globe or gate valves, 50 mm size with iron wheel head, screwed both ends for ironpipe and fixed complete all as specified and directed . |
| 183 | Supply and fix Gun-metal, globe or gate valves, 40 mm size with iron wheel head, screwed both ends for ironpipe and fixed complete all as specified and directed . |
| 184 | Supply and fix Gun-metal, globe or gate valves, 25 mm size with iron wheel head, screwed both ends for ironpipe and fixed complete all as specified and directed . |
| 185 | Supply and fix Stop cock cast copper alloy, outside thread, high pressure with crutch or butterfly handle, screwed both end for iron pipe of size 25 mm complete all as specified and directed . |
| 186 | S&Fix of 415 volts 50 HZ ,3 phase 2 HP centrifugal pumps with motors incl connected items and testing incl reqd itemsi.e nuts bolts washers etc complete all as specified and as directed. |
| 187 | S&Fix in replacement of 415 volts 50 HZ ,single phase 1 HP centrifugal pumps with motors incl connected items and testing incl reqd itemsi.e nuts bolts washers etc complete all as specified and as directed. |
| 188 | M & L for Boring under Road / PCC by using manual tool for inserting, of Pipe line any size complete all as specified and as directed by the Engineer-In-Charge. |
| 189 | S & F DEL three phase starter for capacity of 02 HP centrifugal pumps of 415 volts ,50 HZ 3 phase complete all as specified and as directed. |
| 190 | S&F for PVC flexible green pipe 40 mm dia for swimming pool. |
| 191 | M&L replacement of floot valve of size 40mm suction pipe underground sump well all as per reqd nut ,bolt washer and all specified and directed by Engr-in-charge. |
