|
| 1 | Hacking out old broken glass panes (any thickness, size quality or description) from wooden frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 2 | S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 3 | S&F 3.0mm thick sheet Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and directed. |
| 4 | Taking down chowkat or frames with shutters (without taking off shutters from the frames)n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed. |
| 5 | Taking down chowkat or frames with shutters (without taking off shutters from the frames)exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed. |
| 6 | Taking down shutters of any description exceeding 1 square metre not exceeding 2 square metre each complete all as specified and directed. |
| 7 | S&FAnodised aluminium(power coated) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 8 | S&FAnodised aluminium powder coated frame for door section/ window section/ ventilator section for side hung type shutter /sliding type shutter/fixed type shutter in two or more tracks, including automatic locking handle , rollers and roller plate & fitting arrangement complete all as specified and directed.(Glass pane , hydraulic door closer , plush plate, floor hinges shall be measured and paid separately. |
| 9 | M&L for Aluminium anodied(powder coated) window andventilator shutters, side hung type, without sash bars, aluminium section weighing not less than 0.55 Kg/Metre including clips, rubber packing aluminium snap beading, screws,fittings (each shutters) such as peg stays 150 mm long, hinge type B-21 100 mm long (2 Nos), 150mm long D type handle (one number) and tower bolt 150mm long (one number)complete all as specified and directed.(Notes : (i) Glass panels to windows/ventilatorshall be measured and paid for separately under respective item of this schedule as supply only. (ii) Thickness of powder (polyster) coating shall not be less than 50 Micron.(iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE.(iv) Frame shall be measured and paid for separately under respective item of this schedule. (v) Quoted rate shall deem to included cost of alumiumum powder coated builder hard ware. |
| 10 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,complete all as specified and directed. |
| 11 | S & F in 5.5 mm thick sheet glass, exc .5 sqm selected quality for front sliding shutters of show case on stainless steel bearing rollercomplete all as specified and directed.Note :-(i)Each shutter shall run on two bearing roller and quoted rate shall deem to be included the same.(ii) Sharpe edges of glass shall be grounded/bevelled.(iii)Aluminium channel for sliding the shutter shall be measured and paid for separately under respective items of this schedule. |
| 12 | M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primercomplete all as specified and directed. |
| 13 | M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primercomplete all as specified and directed. |
| 14 | S&F mild steel, 150 mm, ordinary rat tail rod pattern door spring including roller and roller plate,complete all as specified and directed. |
| 15 | M&L for preparation of new wood or wood basedsurfaces of any discription not otherwise described exceeding 10 cms width or girth and applying two coat of synthetic enamel paintoveronecoat of pinkprimercomplete all as specified and directed. |
| 16 | M & L for Preparation of new surface any description not otherwise described area 10cm width or girth and apply two coats of synthetic Enamel paint over one coat of red oxide zinc chrome priming coat,complete all as specified and directed. |
| 17 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawingcomplete all as specified and directed. |
| 18 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Clause No. 8.B.1 to8.B.13 and drawing on page No. 144 & 145 of MES SSR-2020 Part-IIcomplete all as specified and directed. |
| 19 | M&L for 35mm thick factory made, 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated,complete all as specified and directed. |
| 20 | M&L for 35mm thick factory made, 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut andmitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkatscomplete all as specified and directed. |
| 21 | S&F for galvanised stainless steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staplecomplete all as specified and directed. |
| 22 | S&F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples, complete all as specified and as directed. |
| 23 | S&F Aluminium Butt Hinges, 100 mm with aluminium/stainless steel pin including screws & fixingcomplete all as specified and directed. |
| 24 | S&F Aluminium Butt Hinges, 125 mm with aluminium/stainless steel pin including screws & fixingcomplete all as specified and directed. |
| 25 | S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt,complete all as specified and directed. |
| 26 | S&F aluminium alloy, sliding door bolt 250mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy andfixedcomplete all as specified and directed. |
| 27 | S&F aluminium handles cast type, anodised, 150 mm sizecomplete all as specified and directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 29 | M&L joint free non-skid coloured designer ceramic tiles (Square/Rectangular) area of each tile exceeding 0.11 sqmbut not exc. 0.18 sqm ,7-8 mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed bedding layer of 15 mm thick in CM 1:4 complete all as spfd. colour and design approved by Engr-in - Charge.Make :- Somany, Kajaria, Johnson, Nitco. |
| 30 | M&L designer digital ceramic glazed colour tiles as in vertical surfaces such as skirting, dados etc with area of each tile exc.0.11 sqm and not exc. 0.18 sqm 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl 10 mm thick plaster in CM 1:3 complete all as specified colour and design approved by Engr-in-Charge. Make :- Somany, Kajaria, Johnson, Nitco |
| 31 | M&L colour digitalvitrified tiles 10mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed bedding layer of 15 mm thick in CM 1:4 complete all as spfd colour and design approved by Engr-in-Charge.Make :- Somany, Kajaria, Johnson, Nitco. |
| 32 | All as per item No. 31 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on masonry/ concrete surfaces complete all as spfd colour and design approved by Engr-in-Charge. Make:- Somany, Kajaria, Johnson, Nitco. |
| 33 | Taking down shutters of any description from the frames and refixing in thesame opening after repair of door rescuring or easing & adjusting etc , area n.exc 2.00 sqm eachcomplete all as specified and directed. |
| 34 | Dismantling of wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and directed. |
| 35 | S&F for Framed work as in cupboard, almirah and ceiling frame of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering etc. to be prepered for hanging or sliding with hinges also fastening and fixingcomplete all as specified and directed. |
| 36 | S&F mild steel cold rolled butt hinges mediumweight 125 mm longcomplete all as specified and directed. |
| 37 | M&L for 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work incl teak wood beadingwith lipping/frame to matchcomplete all as specified and directed. |
| 38 | M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions, complete all as specified and directed. |
| 39 | S&F 100mm size hasp and staple safety type aluminium anodized with mild steel hinges pin including bolt to hinge plate and fixed with screwcomplete all as specified and directed. |
| 40 | S & F in Ball catches with 8mm dia steel balls and brass body and striking plate including letting in and fixed complete all as specified and as directed. |
| 41 | S&F continuous (piano) hinges mild steel, bright finish width of flaps (when open) 30 mm, complete all as specified and directed. |
| 42 | S&F in repair 25mm dia Harrison rails, mild steel, Chromium Plated with fixing brackets, stops, rollers, end caps etc.complete all as specified and directed. Note:- Quality of all connecting items shall beapproved by GE. |
| 43 | S&F in repairs stainless steel plate rack size 30\" x 30\" x 8\" for grill 12 nos plates and hook for hanging cupscomplete all as specified and directed. Make :- NIRALI, Jayana. |
| 44 | S&F in repairs sink cock (wall mounted) with long swivel spout and wall flangecomplete all as specified and directed..Make :- CERA |
| 45 | S&F in repairs sink mixer (wall mounted) with 190 mm (7.5\") long swivel spout connecting les and wall flangescomplete all as specified and directed. Make :- CERA |
| 46 | S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed. |
| 47 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes;nincluding bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed. |
| 48 | S&F 32/40mm dia PVC waste pipe with cap socketcomplete all as specified and directed.. Make: PRAYAG |
| 49 | S&F PVC connection 15mm size with PTMT nuts of length 450mmcomplete all as specified and directed. |
| 50 | S&F in repairStainless steel grating doom 100mm dia. (minimum weight 25 gms),complete all as specified and directed. |
| 51 | S&F in repair brass chromium plated wall mixer with spout (non - shower arrangement) complete for mixing hot & cold water screwed down for iron pipe 15mm borecomplete all as specified and directed..Make : CERA Cat Part No.-F2004405. |
| 52 | S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed. |
| 53 | S&F in repairs 15mm dia angle / stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed. |
| 54 | Ditto all as Item No 53 above, but stop cock consisting of exposed part (sleeve,lever,wall flange) and concealed part suitable for 15mm/20mm pipeline with inner headcomplete all as specified and directed. |
| 55 | S&F in repair CP corner glassshelf (Large) size 300X300 mm Make :- CERA Cat Part No:-F5005103,complete all as specified and directed. |
| 56 | S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated brackets, guard and railing 60 cm long all as approvedcomplete all as specified and directed. |
| 57 | S&F in repair brass, chromium plated or stainless steel Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 58 | S&F in repair Towel ring size 600mm length, complete all as specified and directed.. Make:- CERA Cat Part No.:- F5001105 |
| 59 | S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges,complete all as specified and directed.. Make :- CERA. |
| 60 | S&F in repair CP Towel rack 600mm long with lower hanger Make Jaquar cat part no-ACN-CHR-1141FN or its equivalent, complete all as specified and directed. |
| 61 | S&F in repairs 32mm / 40mm dia Waste coupling of PTMT (half or full threaded) suitablr for wash basin and sinkcomplete all as specified and directed.. (Minimum weight 32mm-45gms). |
| 62 | S&F in repair stainless steel / powder coatedPeg set of five of good quality approvedby Engr inChargecomplete all as specified and directed. |
| 63 | S&F in repairs geyser connection pipe, 12mm dia, 450mm length (02 Piece set) complete all as specified and directed..Make :- CERACat No. F8070403. |
| 64 | S&F in repair mirror cabinet with PVC body and openable shutter, shelves and size 350 mm x 450 mmcomplete all as specified and directed.. Make : Neelkamal / ARCO / JINDAL. |
| 65 | S&F in repair, 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thickcommercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 66 | S&F in repairsOne piece WC incl twin flushing cistern and soft closing seat cover and all connected itemscomplete all as specified and directed.. Make :- CERA (CAPSTAN) Cat part No.:-S1013108, Jaquar Cat No. :- VGS-WHT- 81851SN size 715x375x795mm. |
| 67 | S&F in repaircentral hole basin mixer with 450mm braided connection pipe (without pop-up)complete all as specified and directed.Make :- CERA Cat Part No :-F2008461 or its equivqlent. |
| 68 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified and directed. |
| 69 | S&F in repair CP seat jet with one meter PVC Tube (CP) as approved by Engr in Chargecomplete all as specified and directed. |
| 70 | S&F in repair Soap dish, vitreous China white, approximate size 160x 160x90mmany type, fixed to plugs with chromium plated brass screws complete all as specified and directed |
| 71 | S&F in repair CP mixture 15 mm bore for mixing hot & cold water screw down for iron pipe,complete all as specified and directed. |
| 72 | S&F in repair bib taps 15mm bore long body, fancy type, cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed,complete all as specified and directed. |
| 73 | S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, black, closed pattern with flat bottom, and seat cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified and directed. |
| 74 | S&F in repair plastic water closet seat, black, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 75 | S&F in repairs Vitreous China wash basin with pedestal, angle back, size 600 x 480mm white, excluding taps, waste, chain and plug and porcelain stopper but including bracketscomplete all as specified and directed.Make :-CERA. |
| 76 | S&F in repair angle / stop valve 15 mm bore, fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unionscomplete all as specified and directed. |
| 77 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580mmx440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including a provision of concrete bedding complete all as specified and directed. |
| 78 | Supply only flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed. |
| 79 | S&F in repair 10 ltr PVC valveless,syphonic action type, flushing cistern and flush pipe, low level, white, with inlet, ball valve, float and handle including brackets,complete all as specified and directed.. Make : CERA. |
| 80 | M&L in repair PVC (SWR) floor trap of outlet dia 75mm, plain with grating including jointing with solvent cement,complete all as specified and directed. |
| 81 | M&L in repair cast Iron floor trap with dia of outlet 100mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1complete all as specified and directed. |
| 82 | M&L in repair cast Iron Nahani trap with dia of outlet 100mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1complete all as specified and directed. |
| 83 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to Store (measured overall and fixed along the centre line over fittings and accessories)complete all as specified and directed. |
| 84 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallscomplete all as specified and directed. |
| 85 | S&F in repair 110mm bore PVC (SWR) bends/shoes any radiuscomplete all as specified and directed. |
| 86 | S&F in repair Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or rooffor 100mm bore,complete all as specified and directed. |
| 87 | Demolition of cement concrete(unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or aboveground level)complete all as specified and directed. |
| 88 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternatebays (n exc 2 Sqm each )and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 89 | M&L for preparation of old surface of wall of any description and apply one coats of oil bound distemper incl a scrubbing down old surface and filling of cracks, holes or damage portion etc preparation with (Jk/Birla) wall care putty as required and making good, approved shade byGE,complete all as specified and directed. |
| 90 | M&L for preparation of old surface of wall of any description and apply two coats of oil bound distemper incl a scrubbing down old surface and filling of cracks, holes or damage portion etc with (JK/Birla) wall care putty as required completeand making good all as directed and specified by Engr-in-Charge. |
| 91 | M & L for Preparationof any old surface of any description and apply one coat of white wash on wall after preparation of surface with (JK/Birla) wall care putty as required for making good amd smooth surfaces,complete all as specified and directed. |
| 92 | M & L for Preparation of any old surface of any description and apply one coat of white wash on ceiling after preparation of surface with (JK/Birla) wall care putty as requiredcomplete all as specified and directed. |
| 93 | M&L for preparation of old painted wood or wood based surfacesexceeding 10 cms width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 94 | M & L for Preparation of surface any description not otherwise described area 10cm width or girth and apply one coats of synthetic enamel paint of old steel surfacecomplete all as specified and directed.. |
| 95 | M&L Finishing walls with texturedpaint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm etc.complete all as specified and directed. |
| 96 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing, dressed stone work and precast concrete articlescomplete all as specified and directed. |
| 97 | M & L for Brick work with sub class \"B\" old size bricks straight or curved of onplan to any radius in halfbrick thick walls built in CM 1:4complete all as specified and directed. |
| 98 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6complete all as specified and directed. |
| 99 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with watercomplete all as specified and directed. |
| 100 | M&L for15mm thick rendering on fair faces of brick/concrete surfacesin cement mortar 1:4 and finishedeven and smooth without using extra cementcomplete all as specified and directed. |
| 101 | M&L for15 mm thick rendering on fair faces of brick/concrete surfacesin cement mortar 1:6 and finishedeven and smooth without using extra cementcomplete all as specified and directed. |
| 102 | M&L Rendering 5mm thick on CeilingIn CM 1:3 of brick work or concrete surfaces rendering is to be finished even and smooth (without using extra lime or cement)complete all as specified and directed. |
| 103 | M&L for preparationofnewly plastered surfaces of walls and applying two coat of oil emulsion distemper after preparation of surfacescomplete all as specified and directed. |
| 104 | M&L for applying two coats of cement base paint on walls after preparation of newly plastered surfacescomplete all as specified and directed. |
| 105 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc,complete all as specified and directed. |
| 106 | M&L Granite slab 16 to 18mm thick as in pillas, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges.complete all as specified and directed. Note : Colour shall be pproved by GE. |
| 107 | Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15mmcomplete all as specified and directed. |
| 108 | M&L for steel water tubing of nominal bore 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.),complete all as specified and directed. |
| 109 | Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 20mmcomplete all as specified and directed. |
| 110 | M&L for steel water tubingof nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.)complete all as specified and directed. |
| 111 | S&F in repair aluminium body brown coated bottom Door Sealing Strip size 36\"\" / 92cm with long lasting black rubber, complete all as specified and directed. Make : Infinite Tech & Oligitdi. |
