|
| 1 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each all as specified and directed all as specified and directed. |
| 2 | All as per Item No 1 above but exc 1.5 sqm but n exc 4 sqm each all as specified and directed. |
| 3 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles.& rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site as per specification & direction. |
| 4 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S.Square tube, fixing in opening as per specification & direction. |
| 5 | M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium slding window 18 to 20 mm thick over and including20 mmthick screed bed in cement mortar 1:3 complete all as specified. |
| 6 | M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick overand including15 mm thick rendering in CM 1:3 complete all as specified and directed. |
| 7 | S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note:Minimum 25 micron anodisation for all aluminium sections) |
| 8 | M&L powder coated aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (80x66mm aparture) all complete. |
| 9 | S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete. |
| 10 | S&F 4mm thick frosted sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete. |
| 11 | S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to Aluminium doors,windows shutter aluminium wire staples complete all as specified and directed. |
| 12 | Taking down shutters of any description n exc 1 sqm each. |
| 13 | All as per Item No 12 above but not exc 2 sqm |
| 14 | S&F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed |
| 15 | S&F 35 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed |
| 16 | S&F 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed. |
| 17 | S & F 25mm thick block board, grade-1 quality exterior grade commercial type fixed with screws to timber frame work of width n.exc. 25 cm in shelves or built-in cupbords, almirahs and similar work with lipping patti all complet as directed by EIC. |
| 18 | S&F 100 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed. |
| 19 | S&F 100mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 20 | S&F 150 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed. |
| 21 | S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 22 | S&F 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 23 | S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge all as specified and directed. |
| 24 | S&F hasp and staple safety type,mild steel, wire type, stove enamelled blackincluding bolt to hinge plate and fixed with screws 125mm size complete all as specified and directed. |
| 25 | S&F 100mm butt hinges, heavy weight cold rolled ile steel, and fixed complete all as specified and directed. |
| 26 | M&L for two coat synthetic enamel paint over a coat red pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed |
| 27 | S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)oraluminium wire staples and removing old beading, complete all as specified and directed. |
| 28 | Supply & Fixing as in repairs aluminium serrated finish 20mm dia curtain rod of approved pattern and shade with all fittings as per site requirement such as , CP screws, rovel plug, etc. complete all as specified and directed by Engr-in-charge. |
| 29 | Material & Labour for docoratedpowder coated aluminium end block, rounded block & brackets fixed in repairs for curtain rod complete all as specifed and directed by Engr-in-Charge. |
| 30 | S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repairs |
| 31 | S&F in repair 32 mm dia PVC flexible waste pipe of suitable length for wash hand basin or urinal complete all as specified and directed |
| 32 | M&L for CI Nahani trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead fixed in cement concrete type B 1 (1:2:4). |
| 33 | S&F PTMT grating doom over Nahani trap and floor trap of 100mm Dia |
| 34 | S & F2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 35 | S & F mild steelhold fasts, wall ties and similar small articlesconforming to Fe 290 Gde E-165 |
| 36 | M&L Providing PCC 1:3:6, type C1(20mm graded stone aggregate) for hold fasts complete all as specified. |
| 37 | M&L Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 38 | M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified. |
| 39 | M & L Coloured glazed ceramic tiles300 x 200 x7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment over 12mm thick rendering as in backing coat in CM 1:4 all as specified and as directed. |
| 40 | M&L non-skid coloured Ceramic tiles 400x400x6 to 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified. |
